• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.1-10
• /
• 1998

This paper is to propose an algorithm named as DYSAC to find the critical path(the longest sensitizable path) in a large digital circuit, whose purpose is to reduce the time to find critical path and to find critical paths of the circuits for which the previous methods could not find one. Also a set of path sensitization criteria named as DYPSEC is proposed, which is used to select a path from input to the output inside the DYSAC. The DYSAC consists of two sub-algorithms; the level assignment algorithm to assign a level to each node and the critical path selection algorithm to select the sensitizable path. The proposed algorithm was implemented with C-language on SUN Sparc and applied to the ISCAS'85 benchmark circuits to make sure if it works correctly and finds the correct critical path. Also, the results from the experiments were compared to the results from the previous works. The comparison items were the ability to find the critical path and the speed, in both of which the proposed algorithm in this paper shows better results than others.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.9
• /
• pp.81-86
• /
• 2015

This paper suggests heuristic algorithm with linear time complexity to decide the normal and optimal point at minimum loss/maximum profit maximum shortest scheduling problem with additional loss cost and bonus profit cost. This algorithm computes only the earliest ending time for each node. Therefore, this algorithm can be get the critical path and project duration within O(n) time complexity and reduces the five steps of critical path method to one step. The proposed algorithm can be show the result more visually than linear programming and critical path method. For real experimental data, the proposed algorithm obtains the same solution as linear programming more quickly.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.3
• /
• pp.90-96
• /
• 2011

Finding the critical path (or the longest path) on acyclic directed graphs, which is well-known as PERT/CPM, the ambiguity of each acr's length can be modeled as a range or an interval, in which the actual length of arc may realize. In this case, the min-max regret criterion, which is widely used in the decision making under uncertainty, can be applied to find the critical path minimizing the maximum regret in the worst case. Since the min-max regret critical path problem with the interval arc's lengths is known as NP-hard, this paper proposes a heuristic algorithm to diminish the maximum regret. Then the computational experiments shows the proposed algorithm contributes to the improvement of solution compared with the existing heuristic algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.482-491
• /
• 2007

This paper proposes a k-disjoint-path routing algorithm that provides energy efficient and reliable message transmission in wireless sensor networks. The proposed algorithm sends messages through a single path without the occurrence of critical events. However, it sends through k disjoint paths(k>1) under the occurrence of critical events. The proposed algorithm detects the occurrence of critical events by monitoring changing data patterns, and calculates k from a well-defined fault model and the target-delivery ratio. Our simulations reveal that the proposed algorithm is more resilient to node failure than other routing algorithms, and it also decreases energy consumption and reduces the average delay much more than multi-path and path-repair algorithms.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.9
• /
• pp.85-93
• /
• 1992

In this paper, the new timing optimization algorithm for combinational networks is proposed. First, we introduce the concept of P-path redundancy which is the extension of redundancy concept used in the testing of combinational networks. In this approach, the critical delay is minimized by removing the P-path redundant side inputs of the critical path, and more accurate timing optimization is possible by systematically considering the statically unsensitizable paths as well as the statically sensitizable paths. It's possible with all previous longest path based approaches that the critical delay of resulting network after timing optimization may be even increased. However, the proposed method guarantees to exclude such a possibility, and can be applied to optimize the timing of combinational networks in technology independent, and dependent phase.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.11
• /
• pp.568-576
• /
• 2002

This paper presents a new algorithm for the enhancement of voltage stability by optimal routing (OR) technique. A new voltage stability index (VSI) for optimal routing is also proposed by using theories of critical transmission path based on voltage phasor approach and equivalent impedance method. Furthermore, the proposed algorithm automatically detect the critical transmission path to critical transmission path to critical load which are faced to voltage collapse due to additional real or reactive loading. We also adopt a improved branch exchange (IBE) algorithm based on a tie branch power (TBP) flow equation to apply the OR technique. The proposed IBE algorithm for the VSI maximizing can effectively search the optimal topological structures of distribution feeders by changing the open/closed states of the sectionalizing and tie switches. The proposed algorithm has been evaluated with the practical IEEE 32, 69 bus test systems and KEPCO 148 bus test system to show favorable performance.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.29-38
• /
• 1999

This paper presents a new algorithm RICP(Redundancy Identification using Critical-pair Paths) to identify untestable faults in combinational logic circuits. In a combinational logic circuit, untestable faults occurred by redundancy of circuits. The redundancy of a circuit can be detected by analyzing areas of fanout stem and reconvergent gates. The untestable faults are identified by analyzing stem area using Critical-Pair path which is an extended concept of critical path. It is showed that RICP is better than FIRE(Fault Independent REdundancy identification) algorithm in efficiency. The performance of both algorithms was compared using ISCAS85 bench mark testing circuits.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.575-581
• /
• 2011

A novel approach for analysis of criticality with respect to path and to activity in networks with fuzzy activity durations is proposed. After recalling the Yager ranking method, the relative degree of criticality of activities and paths are defined. An efficient algorithm based on path enumeration to compute the relative degree of criticality of activities and paths in networks with fuzzy durations is proposed. Examples of former researches are employed to validate the proposed approach. The proposed algorithm has been tested on real world project networks and experimental results have shown that the algorithm can calculate the relative degree of criticality of activities and paths in a reasonable time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.37-42
• /
• 2009

The digital filter is essential element in digital signal processing area. It needs a high computational burden caused by multiplying and adding. The multiplier in digital filter is a dominant element, which occupies an wide area at the field of VLSI design, needs high power-consuming and also decides critical path that affects to filter performance. In this paper we proposed the simultaneous transform method which is represented 2's complementary representation to CSD and MSD representation to solve a complexity problem and to improve a computational speed. The performance of proposed method was implemented in VHDL and applied to an digital filters, was evaluated the decreasing of critical path delay.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.141-150
• /
• 2012

This paper suggests a critical path search algorithm that can easily draw PERT/GANTT chart which manages and plans a project schedule. In order to evaluate a critical path that determines the project schedule, Critical Path Method (CPM) is generally utilized. However, CPM undergoes 5 stages to calculate the critical path for a network diagram that is previously designed according to correlative relationship and execution period of project execution activities. And it may not correctly evaluate $T_E$ (The Earliest Time), since it does not suggest the way how to determine the sequence of the nodes activities that calculate the $T_E$. Also, the sequence of the network diagram activities obtained from CPM cannot be visually represented, and hence Lucko suggested an algorithm which undergoes 9 stages. On the other hand, the suggested algorithm, first of all, decides the sequence in advance, by reallocating the nodes into levels after Breadth-First Search of the network diagram that is previously designed. Next, it randomly chooses nodes of each level and immediately determines the critical path only after calculation of $T_E$. Finally, it enables the representation of the execution sequence of the project activity to be seen precisely visual by means of a small movement of $T_E$ of the nodes that are not belonging to the critical path, on basis of the $T_E$ of the nodes which belong to the critical path. The suggested algorithm has been proved its applicability to 10 real project data. It is able to get the critical path from all the projects, and precisely and visually represented the execution sequence of the activities. Also, this has advantages of, firstly, reducing 5 stages of CPM into 1, simplifying Lucko's 9 stages into 2 stages that are used to clearly express the execution sequence of the activities, and directly converting the representation into PERT/GANTT chart.