• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.131-134
• /
• 2002

In this work, we have developed a systematic way of utilizing the basic design tools for superconductive electronics. This include WRSPICE, XIC, margin program, and L-meter. Since the high performance analog-to- digital converter can be built with Rapid Single Flux Quantum (RSFQ) logic circuits the development of superconductive analog-to-digital converter has attracted a lot of interests as one of the most prospective area of the application of Josephson Junction technology. One of the main advantages in using Rapid Single Flux Quantum logic in the analog-to-digital converter is the low voltage output from the Josephson junction switching, and hence the high resolution. To design an 1-bit analog-digital converter, first we have used XIC tool to compose a circuit schematic, and then studied the operational principle of the circuit with WRSPICE tool. Through this process, we obtained the proper circuit diagram of an 1-bit analog-digital converter circuit. Based on this circuit we performed margin calculations of the designed circuits and optimized circuit parameters. The optimized circuit was laid out as a mask drawing. Inductance values of the circuit layout were calculated with L-meter. Circuit inductors were adjusted according to these calculations and the final layout was obtained.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.13-16
• /
• 2003

In this work, we have studied about an RSFQ (Rapid Single Flux Quantum) switch element. The circuit was designed, simulated, and laid out for mask fabrication. The switch cell was composed of a D flip-flop, a splitter, a confluence buffer, and a switch core. The switch core determined if the input data could pass to the output. “On” and o“off” controls in the switch core could be possible by utilizing an RS flip-flop. When a control pulse was input to the “on” port, the RS flip-flop was in the set state and passed the input pulses to the output port. When a pulse was input to the “off” port, the RS flip-flop was in the reset state and prevented the input pulses from transferring to the output port. We simulated and optimized the switch element circuit by using Xic, WRspice, and Julia. The minimum circuit margins in simulations were more than $\pm$20%. We also performed the mask layout of the circuit by using Xic and Lmeter.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.37-41
• /
• 2002

In this work. we have designed two different kinds of Rapid Single Flux Quantum (RSFQ) OR-gates. One was based on the already developed RSFQ cells and the other was aimed to develop a more compact version. In the first circuit, we used a combination of two D Flip-Flops and a merger and in the other circuit we used a combination of RS Flip-Flops and Confluence Buffer. We tested the circuit performance by using the simulation tools, Xic and Wrspice. We obtained the operation margins of the circuit elements by a margin calculation program, and we obtained the minimum operation margins of $\pm$30%. The circuits were laid out, aimed to fabricate by using the existing KRISS Nb process. KRISS Nb process includes the $Nb／Al_2$$O_3$／Nb trilayer fabricated by DC magnetron sputtering and the reactive ion etching technique for the definition of the features. The major tools used in the layouts were Xic and L-meter.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.146-149
• /
• 2003

In this Work, we have studied about an RSFQ 2$\times$2 crossbar switch. The circuit was designed, simulated, and laid out for mask fabrication The switch cell was composed of a splitter a confluence buffer, and a switch core. An RSFQ 2$\times$2 crossbar switch was composed of 4 switch cells, a switch control input to select the cross and bar, data input, and data outputs. When a pulse was input to the switch control input to select the cross or bar the route of the input data was determined, and the data was output at the proper output port. We simulated and optimized the switch-element circuit and 2$\times$2 crossbar switch, by using Xic and Julia. We also performed the mask layout of the circuit by using Xic and Lmeter.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.141-143
• /
• 2002

We have simulated and Laid out a Single Flux Quantum(SFQ) AND gate for Arithmetic Logic Unit by using XIC, WRspice and Lmeter. This circuit is a combination of two D Flip-Flop. D Flip- Flop and dc SQUID are the similar shape from the fact that it has the a loop inductor and two Josephson junction. We also obtained operating margins and accomplished layout of the AND gate. We got the margin of $\pm$42% over.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.140-142
• /
• 2003

We have designed a SFQ (Single Flux Quantum) D2 Cell and Inverter(NOT) for a superconducting ALU (Arithmetic Logic Unit). To optimize the circuit, we have used Julia, XIC and Lmeter for simulations and layouts. We obtained the circuit margin of larger than $\pm$25%. After layout, we drew chip for fabrication of SFQ D2 Cell and Inverter. We connected D2 Cell and Inverter to jtl, DC/SFQ, SFQ/DC and RS flip-flop for measurement.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.21-25
• /
• 2003

We have designed and simulated an 1-bit ALU (Arithmetic Logic Unit) by using a half adder. An ALU is the part of a computer processor that carries out arithmetic and logic operations on the operands in computer instruction words. The designed ALU had limited operation functions of OR, AND, XOR, and ADD. It had a pipeline structure. We constructed an 1-bit ALU by using only one half adder and three control switches. We designed the control switches in two ways, dc switch and NDRO (Non Destructive Read Out) switch. We used dc switches because they were simple to use. NDRO pulse switches were used because they can be easily controlled by control signals of SET and RESET and show fast response time. The simulation results showed that designed circuits operate correctly and the circuit minimum margins were ＋/-27%. In this work, we used simulation tools of XIC and WRSPICE. The circuit layouts were also performed. The circuits are being fabricated.

• 대한생식의학회:학술대회논문집
• /
• 2004.06a
• /
• pp.75-75
• /
• 2004

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.17-20
• /
• 2005

We has designed, fabricated, and measured a Single flux quantum (SFQ) toggle flip-flop (TFF). The TFF is widely used in superconductive digital electronics circuits. Many digital devices, such as frequency counter, counting ADC and program counter be used TFF Specially, a program counter may be constructed based on TFF We have designed the newly TFF and obtained high bias margins on test. In this work, we used two circuit simulation tools, WRspice and Julia, as circuit optimization tools. We used XIC for a layout tool. Newly designed TFF had minimum bias margins of +/- $37\%$ and maximum bias margins of +/-$37\%$(enhanced from +/- $37\%$). The designed circuits were fabricated by using Nb technology The test results showed that the re-optimized TFF operated correctly on 100kHz and had a very wide bias margins of +/- $53\%$.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.8-12
• /
• 2002

Since the high performance analog-to-digital converter can be built with Rapid Single Flux Quantum (RSFQ) logic circuits the development of superconductive analog-to-digital converter has attracted a lot of interests as one of the most prospective area of the application of Josephson Junction technology. One of the main advantages in using Rapid Sng1e Flux Quantum logic in the analog-to-digital converter is the low voltage output from the Josephson junction switching, and hence the high resolution. To design an analog-digital converter, first we have used XIC tool to compose a circuit schematic, and then studied the operational principle of the circuit with WRSPICE tool. Through this process, we obtained the proper circuit diagram of an 1-bit analog-digital converter circuit. The optimized circuit was laid out as a mask drawing. Inductance values of the circuit layout were calculated with L-meter.