• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.83-90
• /
• 2022

About 90.5 % of barge-towing tugs weigh less than 200 gross tonnage and most are served by the master alone. They are also not subject to the regulations on the working hours and manning levels stipulated in the Seafarers' Act. Therefore, the master of barge-towing tugs cannot take sufficient rest during the navigational watch. Moreover, barge-towing tugs do not satisfy the human seaworthiness due to the inevitable performance of the navigational watch which must be alternately undertaken with an unqualified person, called the "Boatswain". Furthermore, there are many cases in which the master or owner of a tug fails to comply with the additionally required minimum manning levels stipulated in the Ship Of icers' Act when a tug tows a barge. This study reviews the following: (1) the regulations on the working hours and manning levels that are stipulated in the Seafarers' Act, (2) the regulations on the minimum manning levels for ship of icers of the tug's deck part that are stipulated in the Ship officers' Act, (3) marine accidents in the barge-towing tugs. As a result I suggested that one additional deck officer should be on board when a tug tows a barge through the revision of the minimum manning level for ship of icer on the deck part in order to prevent marine accidents of tugs effectively. Especially, the Act on the Punishment, etc. of the Serious Accident came into effect on January 27, 2022. If marine casualties occur continuously at sea due by the same cause, and the cause of such marine casualties would be turned out by the fatigue of the ship of icer caused by insufficient institutional arrangements, the administrator of competent Authorities of Maritime and Port could be punished, so it seems to prepare for it.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.161-167
• /
• 2007

There were no related papers to study about that training ship's bridge was designed for safety navigation and efficient navigation training. Therefore, at first, on this paper, we grouped domestic training ship's bridge layouts into three classes like as "the front and the rear-type bridge layout", "the twin deck-type bridge layout", and "the single-type bridge layout" by mutually layout type between main bridge and training bridge. Furthermore, we investigated working type of navigation training on each bridge layouts through the questionnaire, and extracted merits and demerits for each bridge layouts to be going on operation and training at the same time. At last, we presented new type training ship's bridge model to improve demerits and to elevate merits above mentioned.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.801-804
• /
• 2003

The autopilot system of vessel is proposed to take service safety sorority, to elevate service efficiency, to decrease labor and to improve working environment. Ultimate purpose of it is to minimize the number of crew by guaranteeing economical efficiency of shipping service. Recently, the research is being achieving to compensate various nonlinear parameters of vessel and apply it is course keeping control, track keeping control, roll-rudder stabilization, dynamic ship positioning and automatic mooring control etc. using optimizing control technique. Relation between rudder angle controlled by steering machine of vessel and ship-heading angle, and load condition of ship are nonlinear, which affect various parameters of shipping service. The speed and direction of waves, velocity and quantity of wind, which also cause the non-linearity of it. Therefore the autopilot system of ship requires the robust control algorithm can overcome various non-linearity. On this paper, we design the autopilot system of ship, which overcome nonlinear parameters and disturbance of it using Fuzzy Algorithm, evaluate the proposed algorithm and its excellence through simulation

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.82-87
• /
• 2017

Recent trends in shipbuilding and offshore industries are a huge increase in the ship size and the exploration and production of oil and natural gas in the arctic offshore region. High performance steel plates are required by these industrial trends. Also in IMO(International Maritime Organization) has begun to regulate of fuel of ship to environmental protection, therefore it is little bit difficult to use bunker-C oil to working ship. As the problem of environmental change such as global warming is emerged, the operation of the ship is considered to be involved in the environmental change problem, and the regulation of environmental pollution is gradually strengthened. As these environmental regulations are strengthened demand for LNG fuel ships is rapidly increasing. Currently, cryogenic steels used in LNG tanks include aluminum alloy, SUS 304, and 9%-Ni steel. Those steels are has high cost to construction of large LNG carrier. The new materials were suggested several steel mills to decrease construction cost and easy construction. The new cryogenic steel should be evaluate safety to applied real structure include LNG ship. Therefore, in this study, fracture toughness of weld joints were investigated with cryogenic steel for application of LNG tank.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1509-1513
• /
• 2003

The autopilot system of vessel is proposed to take service safety and security, to elevate service efficiency, to decrease labor and to improve working environment. Ultimate purpose of the proposed system is to minimize the number of crew by guaranteeing economical efficiency of shipping service. Recently, the research is being achieved to compensate various nonlinear parameters of vessel and apply it to course keeping control, track keeping control, roll-rudder stabilization, dynamic ship positioning and automatic mooring control etc. using optimizing control technique. Relation between rudder angle controlled by steering machine of vessel and ship-heading angle, and load condition of ship is nonlinear, which affects various parameters of shipping service. The speed and direction of waves, velocity and quantity of wind, which also cause the non-linearity of it. Therefore the autopilot system of ship requires the robust control algorithm can overcome various non-linearity. On this paper, we design the autopilot system of ship, which overcomes nonlinear Parameters and disturbance of it using Fuzzy Algorithm, evaluate the proposed algorithm and its excellence through simulation.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.617-629
• /
• 2022

This study empirically analyzed the mediating effect of technology absorption capacity in the relationship between technological innovation of ship parts manufacturing companies on business performance. Through this, it will be possible to provide implications for improvement plans for management strategy establishment related to technology development in the future. In order to achieve the purpose of this study, R&D, marketing, production·A total of 362 people working in manufacturing and finance/accounting departments were selected as subjects for this study. As a result of this study, it was found that technological innovation and technology absorption capacity of ship parts manufacturing companies have a positive (+) effect on business performance. The conclusion based on these research results is that the potential absorption capacity and realized absorption capacity constituting technology absorption capacity are judged to be the main key factors between technological innovation and management performance, such as continuous technological capacity accumulation. From a practical point of view, the ship parts manufacturing industry needs to focus on its ability to absorb smart parts process technology.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.313-321
• /
• 2009

The construction of fiber-reinforced plastic (FRP) boats is decreasing trend since the application of international regulations on the control of marine environmental pollution, which recommended the use of environmentally friendly materials. The aluminum alloy used with material for ship is a superior to FRP. It is environmental friendly, easy to recycle, and provides a high added value to fishing boats. However, the welding for Al alloy materials have many problems, such as deformation by welding heat and effect of the working environment. In this paper, it was carried out welding by robot with welding material of ER5183 and ER5556 on 6061-T6 Al alloy for ship. The mechanical and electrochemical characteristics evaluated for specimen welded by robot. The cathodic polarization trend for the base metal and welding metal showed the effects of concentration polarization due to oxygen reduction and activation polarization due to hydrogen generation. The hardnesses of welding zone and heat affected zone are lower than that of base metal. At the result of tensile test, the specimen welded with ER5183 presented excellent property compared with ER5556.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.3
• /
• pp.203-211
• /
• 2014

To raise the industrial competitiveness in the field of ship-building, it is crucially important that the yard should use production facilities and working space effectively. Among the related works, the management of tremendous blocks' number, the limited area of assembly shops and inefficient personnel and facility management still need to be improved in terms of being exposed to a lot of problems. To settle down these conundrums, the various strategies of block arrangement on the assembly floors have been recently presented and in the results, have increasingly began to be utilized in practice. However, it is a wonder that the sampled or approximated block shapes which usually are standardized projections or the geometrically convex contour only have been prevailed until now. In this study, all parts including the panel, stiffeners, outer shells, and all kinds of outfitting equipment are first extracted using the Volume Primitive plug-in module from the ship customized CAD system and then, the presented system constructs a simpler and more compact ship data structure and finally generates the novel projected contours for the block arrangement system using the adaptive concave hull algorithm.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.3
• /
• pp.8-12
• /
• 2004

The anchor is laid on the seabed, and the main engine is working against incident environmental loads in a typhoon. As the main engine is broken Mum in the storm, the anchor chain is cut and the vessel drifts. Although a ship is moored by two-point mooring lines to maintain her position, it has crashed into a rock because of a typhoon, resulting in a possible accidental oil spillage. In this paper, we studied maintenance of a ship's position, which is analyzed based on the slow motion maneuvering equations considering wave, current, and wind. To estimate wave loads, the direct integration method is employed. The current forces are calculated, using MMG (Mathematical Modeling Group). Th two-point mooring forces are quasi-statistically evaluated, using the catenary equation. Th coefficients of wind forces are modeled from Isherwood's empirical data, and the variation of wind speed is estimated by wind spectrum. The nonlinear motions of a two-point moored ship are simulated, considering wave, current, and wind load, in specific domain of time.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.1
• /
• pp.33-44
• /
• 2001

Tankers have somewhat different shapes in construction and working condition compared with normal merchant ship. If an accident occurs, normal merchant ship's damages will mostly be confined to ship and cargo, but those of tankers will result in oil spills and catastrophic loss beyond our imagination. So, first we must understand risk factors, pre-loss control and post-loss control, legal regulations about its indemnification and marine insurance for oil tanker operation. When unexpected accidents happen, despite pre-loss control, it is possible to cover those kinds of losses by insurance. To control these losses, however, it is important to establish compensation for oil pollution and arrange for oil pollution preventing system. In spite of these oil pollution preventing systems, we have rarely seen that pollution from oil tankers could be solved. So this paper was studied more fundamental and overall control measures for the risk management of oil tanker operation.