• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.26-31
• /
• 1994

To provide further information for reutilization of the waste wood obtained after cultivating oak mushroom in Kangwon-do, the crystal structures of the waste wood were investigated and compared to those of normal woods by a series of x-ray diffraction analysis. The results obtained are as follows: 1. An x-ray diffraction diagram of cultivated wood for 5 years was same as that of typical cellulose with some orientation of cellulose crystallites, but that of cultivated wood for 8 years a random. 2. Crystallinity indices in normal and cultivated woods for 5 years ranged from 57% to 60%. In the cultivated wood for 8 years, however, the value showed about 40%. 3. Crystallite widths of cultivated woods for 5 years and for 8 years were 3 nm and 2.5 nm, respectively. 4. Intensity ratios of equatorial and meridional layers did not show any significant differences. From the above results, it is clear that the waste wood obtained after cultivating oak mush room for 5 years showed basically same crystal structures with normal wood. Therefore, we think that the waste wood may be used available for cellulosic material instead of normal wood.

• Journal of the Korean Wood Science and Technology
• /
• 제31권4호
• /
• pp.1-7
• /
• 2003

본 연구에서는 산불 피해를 입은 소나무재의 유효 활용을 위한 기초자료를 얻고자 해부 및 물리학적 특성을 조사하였다. 산불 피해재의 수지구, 에피델리얼세포와 방사유세포내에는 건전재와 달리 과립모양의 물질이 많이 존재하였으며, 그 외의 목부 조직구조는 정상재와 거의 차이가 없었다. 건전재와 비교하여, 산불 피해재는 상대결정화도가 다소 높았으며, 생재함수율과 접선 및 방사단면 흡수량은 다소 낮게 나타났다. 수축율 및 팽윤율과 기본밀도는 정상재와 거의 유사한 값을 보여주었다.

• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.539-547
• /
• 2012

To manufacture laminated wood with improved mechanical properties by providing uniform adhesiveness, the adhesive was applied and the plate adhesive was laminated on the wood surface. Then, after laminating the wood on the top part of the adhesivebond, it was heated and dried while the adhesive was stiffened using microwaves, and the test piece was manufactured by compressing it with the press machine for thirty minutes. The temperature and the water content were examined according to the heating time of the wood heated with the microwave, and testing was conducted on the shear strength and flexural strength of the wood. In addition, the microstructure of the adhesive bond between the wood was recorded to confirm the penetrabilityinto the wood structure for the adhesive. After the test was conducted, it was found that the test piece manufactured with wood that has its water content leveled with the microwave heating showed improved shear strength and bending strength compared to the standard test piece. With regard to adhesives, liquefied polyvinyl acetate resin and plate's PVB resin were found to have superior adhesive strength. Also, after filming the cellular microstructure, it was found that when the laminated wood is heated with microwaves, the infiltration of the adhesive into the inside of the wood becomes easy, which makes it effective for improving adhesiveness.

• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.451-458
• /
• 2019

Jabon (Anthocephalus cadamba Miq.) is a fast-growing species that exhibits a lower natural resistance than that exhibited by the timber sourced from natural forests. Jabon's resistance to termite attack can be improved by impregnating its wood structure with poisonous organic materials. This study examined jabon's resistance to termite attack when impregnated with wood vinegar and an animal adhesive. The wood specimens were impregnated using sengon wood vinegar and an animal adhesive (8% and 10%, respectively) using a vacuum pressure machine. The specimens were tested for their resistance to subterranean and dry-wood termites according to Indonesian National Standard (SNI 7207-2014). The results denoted that jabon impregnated with wood vinegar and an animal adhesive concentration of at least 8% with the addition of 4% borate was effective to resist termite attacks. The impregnated jabon exhibited a lower weight loss and higher termite mortality when compared with those exhibited by the control specimens. Thus, the resistance class improved from class IV to class I.

• Journal of the Korean Wood Science and Technology
• /
• 제34권2호
• /
• pp.88-94
• /
• 2006

The purpose of this study is to examine the relationship between antioxidant activities and chemical structures of various chalcones. Twenty-two chalcones were assessed for their radical scavenging activity using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. Of 22 compounds tested, the most active on DPPH radical was 2',4-dihydroxy-3,3'5-trimethoxy-5'-propylchacone (4) (72.6% at 100 ppm). It was followed by 3',4'-dihydroxy-3,4,5-trimethoxy-6'-methylchalcone (6), 2',4,4'-trihydroxy-3-methoxy-5-propenylchalcone (7) and 2',4,4'-trihydroxy-3,5-dimethoxychalcone (13). Based on the results, we concluded that the scavenging activity is controlled by the number and the position of the substitution in the compound.

• 한국산림과학회지
• /
• 제81권4호
• /
• pp.357-362
• /
• 1992

아까시나무와 산돌배나무의 수분이동(水分移動) 경로(經路)를 이해하고, 수분이동(水分移動) 경로(經路)를 이용한 무늬목을 생산하기 위하여, 염료침투경로(染料浸透經路)를 0.5% acidic fuchasin 용액과 0.5% fast green 용액을 수목(樹木)에 주입시켰다. 환공재(環孔材)이면서 타이로시스를 갖고있는 아까시나무와 산공재(散孔材)이면서 목섬유(木纖維)에 많은 벽공(壁孔)이 존재하는 산돌배나무의 목부구조(木部構造)와 수분이동(水分移動) 경로(經路)를 비교했다. 그 결과 아까시나무의 수분통도(水分通導)는 당해년도(當該年度)와 전년도(前年度)에 형성된 조재부(早材部)의 대도관(大導管)에 의해서 주도되었다. 그리고 타이로시스가 도관(導管) 내강(內腔)을 폐쇄(閉鎖)하고 있는 심재(心材)와 이행재(移行材)에는 염료침투(染料浸透)가 되지 않았다. 산돌배나무는 수(髓)를 제외하고 전부위에 염색되었으며, 특히 도관(導管)이외에 목섬유(木纖維)의 벽(壁)에 염료(染料)의 침착이 이루어졌다.

• 한국가구학회:학술대회논문집
• /
• 한국가구학회 2006년도 춘계학술발표대회 논문집
• /
• pp.177-182
• /
• 2006

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.71-77
• /
• 1998

To elucidate chemical structure of the wood extractive, wood meal of Larix leptolepis Gorden was extracted with 95% ethanol for 72 hours. The extract was fractionated with organic solvents such as n-hexane, chloroform, diethylether, and ethyl acetate. From the hexane somble fraction of the extractives, a new diterpene compound was isolated and identified as 6-acetoxymanool or 13-hydroxy-8(17), 14-labddienyl-6-acetate by IR, $^1H(^{13}C)$-NMR and Mass spectrometry.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.1-5
• /
• 2018

Wood Polymer Composites(WPC) have attracted significant attention because of ecological and environmental concerns. However, the structure of Wood Flour containing many hydroxyl groups(-OH) reduces the interface adhesion to Phenol-formaldehyde(PF) and it decreases the mechanical properties of the PF/Wood Flour Composites. The present work involves the modification of Wood Flour using silanes reinforced with Phenol-formaldehyde to enhance the mechanical properties of the composites. The spectroscopic properties of the composites were analyzed using FT-IR, XPS(X-ray Photoelectron Spectroscopy) and the mechanical properties i.e., tensile strength, flexural strength and impact strength were studied. We confirmed the modification effect of silanes by spectroscopic analysis, and the mechanical properties of the composites using wood flour modified by silanes were significantly improved.

• 건축역사연구
• /
• 제31권6호
• /
• pp.7-16
• /
• 2022

Traditional Korean architecture and traditional ships maintained a close relationship with carpenters and tools because wood, the material, was common. This close relationship may have been from the time of ancient architecture and ancient ships. In previous studies, researchers proved the relationship between these two sides through historical records of traditional architecture and traditional ships. This study attempts to prove the structural association using existing remains. As a result, three structural similarities between traditional architecture and traditional ships could be found. First, the types of wood used are similar, and the tools and terms used are similar. Second, the method of distinguishing horizontal and vertical materials and the structure of wood and the method of forming wood are similar. Lastly, the ship carpenters mobilized for the construction of the palace mainly worked on long and curved materials such as the eaves and the ridge of a roof, because this was the work done when the ship was built. Therefore, it can be assumed that the roof structure they created resembles that of the ship.