• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.817-825
• /
• 2003

The amount of damage suffered from the red tide occurring at the near shore is increasing rapidly. The Windows visual system discussed in this paper is developed in order to help minimize the damage. The system is focused on the monitoring the coastal environment. and forecasting the red tide occurrence. Although several similar systems are now existing. most of them are based on the web application. which cause the large response time. limited presentation ability of data. and inability of data storing at client side. The Windows visual system described in this paper operates on the Internet to get the ubiquitous access. One of three components of the Windows visual system. client system is developed as a Windows application in order to overcome the weak points of the previous systems. The gathering. analysis, and monitoring of data can be done at real time using the Windows visual system.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.743-744
• /
• 2008

By using DirectX technology, an improved Visual Monitoring System implemented in this paper. The proposed Visual Monitoring System is developed based on the S3C2440 processor. The Windows CE 5.0 is adopted as an operating system, and Visual Monitoring System transfer image 15 frame per second using UDP/IP and by using AdaBoost Algorithm, detect face region and save face image.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.602-607
• /
• 2003

Sensors based bridge monitoring system (SBBMS) is designed to perform real-time monitoring and to store the performance history of in-service bridges. In general, visual inspections play a major role in maintenance of in-service bridges; however, they are not adequate to document the behavior of a bridge. Therefore, visual inspections and sensor based monitoring systems complement each other. Sensor based bridge monitoring systems consist of hardware and software systems. The hardware system contains the sensors and data-loggers to measure the behavior of a structure, the communicational equipment to transmit the measured data from the site to the monitoring center, and the computers to arrange and analyze the data. The software system controls data-loggers, arranges and analyzes the measured data, makes real-time display, stores the performance history.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.607-614
• /
• 2000

A cost-effective automated slope monitoring system is developed to monitor hazardous cut slopes along highways. This automated slope monitoring system consists of data-collection and visual monitoring, data-transmitting, database and internet service, and alarm system. Wire-line extensometer, automatic raingauge, and CCD camera are selected as monitoring instruments in this system, after consideration of failure characteristics of roadside cut slopes in the country. This paper describes the important features of this newly developed automated slope monitoring system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.125-131
• /
• 2009

In this paper, we proposed the remote visual monitoring system on mobile robot platform. The proposed system is composed of ARM9 core PXA255 processor, micro CMOS camera and wireless network and the captured visual image is transmitted via 803.11b/g wireless LAN(WLAN) for remote visual monitoring operations. Robot platform maneuvering command is transmitted via WLAN from host and the $640{\times}480$, $320{\times}240$ pixel fixed visual image is transmitted to host at the rate of $3{\sim}10$ frames per second. Experimental system is implemented on Linux OS base and tested for remote visual monitoring operation and verified the proposed objects.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.115-125
• /
• 2000

In this paper, we suggest the basic components of monitoring system for the semiconductor wafer cleaning equipment and a monitoring system model based on these components. Basic component is defined as a mandatory function which consists of communication with the control system, user interface, communication with the remote monitoring system, management of monitoring data and inter-task communication. We have defined the function of each component and the relation among them, and designed each component as a task. To evaluate the validity of the suggested model, we have implemented the basic components using the Visual C++ on Windows NT and applied them to the Monitoring System for the semiconductor wafer cleaning equipment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.242-250
• /
• 2003

We propose the monitoring system scheme for the CPS/INS integrated navigation system. The design requirements of the monitoring system are suggested and the software scheme based on GUI is proposed. The proposed monitoring system consists of an I/O interface part, a navigation data display part, and a post-processing part. The I/O interface part is responsible for data communication between the monitoring system and a navigation computer unit. The navigation data display part provides various display methods to show the navigation data to user in real-time. The post-processing part collects the navigation data to analyze the performance of navigation system. The proposed monitoring system software was developed using the Visual C++ programming language and a van test was carried out to demonstrate the real-time operation of the monitoring system. The test result shows that the proposed monitoring system can be effectively applied to the CPS/INS integrated navigation system.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.5
• /
• pp.53-62
• /
• 2007

Recently, for the stabilization estimation of structures, many automatic measuring instruments with expensiveness and high accuracy have been developed and utilized. However, the existing manual measuring systems are almost impossible to measure the real-time for the whole surface of large-scale structures and an automatic measuring system has disadvantages with demanding enormous expense. In this study, 3D digital visual monitoring system was developed by using digital photogrammetry technique. To confirm application of developed system, it was applied to the measurement of the wall displacement of concrete surface and displacement measurement of reinforced-soil wall block. Then, the result of the test was compared with measuring value of total station. Based on the results of the comparison, the application of visual monitoring system was evaluated. The results show that the developed visual monitoring system could be available in displacement measure of structures.

• Journal of Information Processing Systems
• /
• v.8 no.2
• /
• pp.347-358
• /
• 2012

Recently, security researches have been processed on the method to cover a broader range of hacking attacks at the low level in the perspective of hardware. This system security applies not only to individuals' computer systems but also to cloud environments. "Cloud" concerns operations on the web. Therefore it is exposed to a lot of risks and the security of its spaces where data is stored is vulnerable. Accordingly, in order to reduce threat factors to security, the TCG proposed a highly reliable platform based on a semiconductor-chip, the TPM. However, there have been no technologies up to date that enables a real-time visual monitoring of the security status of a PC that is operated based on the TPM. And the TPB has provided the function in a visual method to monitor system status and resources only for the system behavior of a single host. Therefore, this paper will propose a m-TMS (Mobile Trusted Monitoring System) that monitors the trusted state of a computing environment in which a TPM chip-based TPB is mounted and the current status of its system resources in a mobile device environment resulting from the development of network service technology. The m-TMS is provided to users so that system resources of CPU, RAM, and process, which are the monitoring objects in a computer system, may be monitored. Moreover, converting and detouring single entities like a PC or target addresses, which are attack pattern methods that pose a threat to the computer system security, are combined. The branch instruction trace function is monitored using a BiT Profiling tool through which processes attacked or those suspected of being attacked may be traced, thereby enabling users to actively respond.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.37-41
• /
• 2002

This study has been focused on the development of an open architecture CNC system and integration of core application technology for machine tool such as a remote monitoring/diagnosis system, NURBS interpolation, and cutting process simulation. To do this, we have developed a comprehensive CNC software including the basic HMI, screen editor, ASF, and visual builder. As a control hardware system for machine tool, the universal I/O module and CNC main unit have been developed. Then the remote monitoring/diagnosis system and NURBS interpolation have been implemented in the CNC software. The cutting simulation software will be used for enhancing the productivity of machine tools. Through a simulator and test bed, the whole technology has been verified.