• 공업화학
• /
• 제10권8호
• /
• pp.1175-1179
• /
• 1999

반도체 봉지재용 epoxy molding compound(EMC)에는 고함량의 충전제가 함유되어 있어 충전제의 함량이 유변학적 거동에 큰 영향을 미친다. 본 연구에서는 반도체 봉지재용 EMC의 점도거동을 충전제 함량과 주파수(frequency)의 변화에 따라 조사하였다. 또한 주파수변화에 따른 점도거동을 전단율(shear rate)의 함수로 변환하기 위해 Cox-Merz 식과 modified Cox-Merz 식을 적용해 보았다. 이 결과 고함량에서 전단박화현상(shear thinning)과 항복강도(yield stress)가 관찰되었으며 전단율의 함수로의 변환은 Cox-Merz식을 적용하였을 때는 고종도에서 변형율 변화에 따른 점도값 차이 때문에 적용될 수 없었다. Modified Cox-Merz식을 적용하였을 때는 고농도/고변형율에서는 측정장치의 한계 때문에 오차를 보이기는 하지만 각 변형율에 따른 점도값들이 한 개의 마스터곡선으로 일치되는 경향을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.922-928
• /
• 1997

The conformational transition of poly(L-proline) (PLP), Form Ⅱ → Form Ⅰ and the intermolecular aggregation of the product, Form Ⅰ, during and after the transition in water-propanol (1:7, 1:9, 1:15.7, and 1:29 v/v) were studied. For the study, the viscosity change and excess light scattering intensity were measured in the course of the transition which was determined by the Form Ⅰ fraction, fI of the sample solution. For the PLP sample of molecular weight Mv=31,000 the experimental results show that the reaction course is roughly divided into three regions: in the first region [fI=0.27 to 0.40 (- [α]D=400 to 330)], the conformational change of Form Ⅱ → Form Ⅰ occurs with decrease of viscosity, in the second region [fI=0.40 to 0.80 (- [α]D=330 to 120)], a partial side-by-side (p-S-S) type aggregation in which Form Ⅰ blocks interact with each other, which induces the increase of viscosity, starts to occur, and in the third region [fI=0.80 to 1.00 (- [α]D=120 to 15)], a side-by-side type (raft like) aggregation of Form Ⅰ or an end-to-end (E-E) type aggregation occurs according to the solvent situation, i.e., in a water-rich medium [water-propanol (1:9 or 1:7 v/v)], the (S-S) type aggregation with a gross decrease in viscosity occurs while in a water-poor medium [water-propanol (1:29 or 1:15.7 v/v), the (E-E) type aggregation with a large increase in viscosity occurs. The (S-S) type aggregation was promoted at high temperatures. Based on the structure of PLP, a reasonable mechanism for the (p-S-S) and (S-S) aggregation which occurs with the transition of Form Ⅱ → Form Ⅰ is considered. The suggested mechanism was also supported by the result of chain length effect of PLP for the aggregation.

• 대한화장품학회지
• /
• 제42권2호
• /
• pp.127-133
• /
• 2016

본 연구에서는 정제수/Span 80-Nikkol BL 25/오일계의 water-in-oil (W/O) 나노에멀젼을 높은 온도에서 PIC 유화로 제조하였다. 이 방법은 본 시스템에서 미세하게 분산된 저점도의 W/O 나노에멀젼의 형성을 가능케 하였다. 그러나 실온에서 PIC 방법으로 제조된 에멀젼은 나노에멀젼보다는 마크로에멀젼이 제조되었다. 유화온도가 $30^{\circ}C$에서 $80^{\circ}C$로 증가하면 온도에 따른 계면장력의 큰 변화의 결과로 입자 크기는 $2{\mu}m$에서 100 nm 정도로 감소하였다. $80^{\circ}C$에서 제조된 나노에멀젼의 입자 크기는 50 ~ 200 nm 범위에 있었고 내상의 분율은 15 wt%까지 가능하였다. 또한 혼합 유화제의 최적 HLB는 7.0 부근에서 가장 안정한 나노에멀젼이 형성되었다. 제조된 나노에멀젼은 1개월 이상 실온에서 안정하였다. 본 연구 결과는 저점도의 W/O 나노에멀젼의 형성 최적화에 중요한 정보를 제공할 수 있다. 이 결과는 W/O 나노에멀젼의 저점도로 인한 부드러운 사용감 등으로 화장품 제형으로 유용하게 이용될 것으로 생각된다.

• 펄프종이기술
• /
• 제45권5호
• /
• pp.49-55
• /
• 2013

To explore the paper materials for restoration of the Annals of the Joseon Dyansty, durability of the three type of the traditional Korean Papers were estimated in this study, through moist heat artificial aging test. Three types(D, F, and G) which showed the best preservation performance in dry heat and UV treatment in the previous study were selected and artificial accelerated aging treatment with moist-heat process was conducted; the viscosity change rate was D>G>F; folding endurance G>D>F; $L^*$ value F>D>G; $a^*$ and $b^*$ change rate D>G>F; brightness decrease rate D>G>F, suggesting paper F showed the least change rate in physical/optical properties. Also the CLSM image observation showed fair coherence among fibers and confirmed paper mulberry. And in FDI extraction from each sample, paper F showed the highest value. Overall, paper F (traditional glossy paper) showed the highest stability against thermal treatment. It confirms that paper F is suitable as restoration paper for tributary remains including the annals of the Joseon Dynasty for its steady strength/viscosity decrease rate and color change rate.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.152-160
• /
• 1997

A diesel engine oil which was formulated and a commercial diesel engine oil (API CG4) made from same base oil were tested by car and analyzed of their physical, chemical and mechanical properties. The tested oil to be analyzed were sampled from engine every 1000 km until 8000 km and determined the kinematic viscosity, TAN, TBN, metal content in oil, additive depletion, antiwear property and IR analysis. From the study, both the tested oils were almost same properties for the change of TAN and TBN, but the change of kinematic viscosity of formulated oil was slightly higher than that of commercial oil. But the concentration of metal in the formulated oil, especially iron, were increased much less during test. The iron content of the commercial oil was increase rapidly from 7000 km while the formulated oil was still low. These results were conformed by the antiwear test by 4-ball wear test machine for the samples. Also for the commercial oil, the depletion factor of the Zn-DTP which was added as an antiwear property was not change any more after 7000 km. But the formulated oil was change continuously until 8000 km, which mean that the ability of wear protection of the sliding parts exists for the formulated oil. With the results which were analyzed of the properties of oils by field test, it was found that the commercial oil could be used only within 7000 km, but the formulated oil can use more than 8000 km without severe wear of the sliding parts in the diesel engine.

• 대한한방내과학회지
• /
• 제16권1호
• /
• pp.181-196
• /
• 1995

The present experiments were designed to investigate the effects of BangPoongSan on the cardiovascular system in the experimental Animals. And thus the change of blood pressure, auricular blood flow, artery contraction, death rate, platelet aggregation repression, plasma coagulation factor activity, plasma antithrombin activity, whole blood viscosity and plasma viscosity were studied. The result were summarized as the followings: 1. BangPoongSan dropped the blood pressure in the spontaneous hypertensive rat. 2. The drug increased the auricular blood flow in rabbit. 3. The drug relaxed the artery contraction by pretreated norepinephrine in white rat. 4. The drug inhibited the death rate of mouse which was led to thromboembolism by serotonin and collagen. 5. The drug inhibited the platelet aggregation in rat. 6. The drug prolonged the prothrombin time and activated partial thromboplastin time on the test of plasma coagulation factor activity in rat, but was not valuable. 7. The drug presented the antithrombin activity in rat. 8. The drug reduced the whole blood viscosity and plasma viscosity in rat, but the latter was not valuable. According to the results, Bangpoongsan increased the blood flow and dropped the blood pressure by dilatation of blood vessel smooth muscle. And the drug presented the antithrombin acivity, inhibited the platelet aggregation and reduced blood viscosity. Therefore these effects are assumed to improve the cardiovascular circulation disorder and prevent thrombosis.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.141-146
• /
• 2007

In this study, the effects of change in ambient gas viscosity on spray structure have been investigated in the high temperature and pressure field. To analyze the structure of evaporative diesel spray is important in speculation of mixture formation process. Emissions of diesel engines can be reduced by the control of the mixture formation process. Therefore, this study examines the evaporating spray structure in the constant volume chamber. The viscosity of ambient gas was selected as the experimental parameter, is changed from 21.7 mPa s to 32.1 mPa s by changing in ambient gas temperature. In order to obtain images of the liquid and vapor-phase of injected spray, exciplex fluorescence method was used in this study. The liquid and vapor-phase images were taken with 35mm still camera and CCD camera, respectively. Consequentially, it could be confirmed that the distribution of vapor concentration is more uniform in the case of the ambient gas with high viscosity than in that of the ambient gas with low viscosity.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.196-201
• /
• 2001

Electro-Rheological(ER) fluids change their apparent viscosity according to the electric field strength. Therefore, there are many practical applications using the ER fluids. ER effect on the dispersive system of polarizable fine powder/dielectric oil has been investigated. The electrical and rheological properties of starch based ER fluid were reported. Yield stress of the fluids were measured on the couette cell type rheometer as a function of electric fields, particle concetrations, and temperatures. The electric field is applied by high voltage DC power supply, The outer cup is connected to positive electrode(+) and the bob becomes ground(-). And the temperatures the viscosity(or shear stress) versus shear rates were measured. In this experiment shear rates were increased from 0 to 200s$^{-1}$ in 2 minutes. This thesis presents Bingham properties of ER fluids subjected to temperature variations. The temperature dependence of the viscosity was determined for ER fluids consisting of 35 weight % starch particles in automatic transmission oil.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.124-127
• /
• 2016

Humidity calibration for a temperature-stable quartz oscillator (TSQO) was investigated to exclude the influences of relative humidity on the TSQO output in order to use the corresponding devices outdoors. The TSQO output is a voltage that is inversely proportional to the electric impedance of the quartz oscillator, which depends on the viscosity and density of the measured gas. The TSQO output was humidity calibrated using its humidity dependence, which was obtained by varying the relative humidity (RH) from 0 to 100 RH% while other conditions were kept constant. The humidity dependencies of the TSQO output were fit by a linear function. Subtracting the change in the TSQO output induced by the change in humidity, calculated with the function from the experimentally measured TSQO output for a range of 0-100RH%, eliminated the influence of humidity on the TSQO output. The humidity calibration succeeded in reducing the fluctuations of the TSQO output from 0.4-3% to 0.1-0.3% of the average values for a range of 0-100RH%, at constant temperatures. The necessary stability of the TSQO output for application in hydrogen sensors was below one-third of the change observed for a hydrogen leakage of 1 vol.% hydrogen concentration, corresponding to 0.33% of the change in each background. Therefore, the results in this study indicate that the present humidity calibration effectively suppresses the influence of humidity, for the TSQO output for use as an outdoor hydrogen sensor.

• Applied Biological Chemistry
• /
• 제39권3호
• /
• pp.165-171
• /
• 1996

볏짚으로부터 분리한 Bacillus sp. K-1과 그 변이주 KM-21과 KM-83이 생산하는 biopolymer들의 물성학적 성질을 비교 조사하였다. 은도에 따른 biopolymer의 겉보기 점도는 온도가 높아짐에 따라 감소하였으며, $20^{\circ}C$일 때에 비해 $80^{\circ}C$일 때 KM-21 균주가 생산하는 biopolymer는 1.7배, K-1균주의 biopolymer는 2.7배, KM-83 균주의 biopolymer는 1.9배 정도로 낮은 점성을 보였다. Biopolymer 용액의 점성은 농도가 증가함에 따라 크게 증가하여 6%의 농도에서 가장 높게 나타났으며, 2%, 4%, 6% 모두 pseudoplastic특성을 나타내어 농도에 대한 의존성이 매우 높았다. 6%의 농도일 때 2%의 농도와 비교해서 전단 속도가 $93\;sec^{-1}$ 일 때 KM-21은 26배, K-1은 56배, KM-83은 28배로 모균주의 biopolymer인 K-1이 가장 높은 점성을 보었다. pH에 따른 점도 변화는 pH7.0에서 최고를 보였으며, 알칼리성 조건일 때에 비해 산성조건에서 상대적으로 낮은 값의 점성을 보였다.