최근 낮은 기가비트급 광통신 집적회로의 구현에 sub-micron CMOS 공정이 적용되고 있다. 본 논문에서는 표준 0.35mm CMOS 공정을 이용하여 4채널 3.125Gb/s 차동 전치증폭기 어레이를 구현하였다. 설계한 각 채널의 전치증폭기는 차동구조로 regulated cascode (RGC) 설계 기법을 이용하였고, 액티브 인덕터를 이용한 인덕티브 피킹 기술을 이용하여 대역폭 확장을 하였다 Post-layout 시뮬레이션 결과, 각 채널 당 59.3dBW의 트랜스임피던스 이득, 0.5pF 기생 포토다이오드 캐패시턴스에 대해 2.450Hz의 -3dB 대역폭, 그리고 18.4pA/sqrt(Hz)의 평균 노이즈 전류 스펙트럼 밀도를 보였다. 전치증폭기 어레이의 공급전원은 단일전압 3.3V 이고, 전력소모는 92mw이다. 이는 4채널 RGC 전치증폭기 어레이가 저전력, 초고속 광인터컨넥트 분야에 적합함을 보여준다.
트랜스임피던스 증폭기는 전체 광 수신기의 성능을 결정하는 가장 핵심적인 블록으로써 높은 트랜스임피던스 이득과 기가 비트급의 넓은 대역폭을 요구한다. 본 논문에서는 아날로그 어댑티브 이퀄라이저를 이용하여 트랜스임피던스 증폭기의 대역폭을 보상하고, 리미팅 증폭기를 이용하여 전체 트랜스임피던스 이득을 증가 시키는 단일 칩 광 수신기의 아날로그 회로를 제안한다. $0.13{\mu}m$ CMOS 공정을 이용하여 설계한 광 수신기는 포스트 레이아웃 시뮬레이션 결과, $120dB{\Omgea}$의 트랜스임피던스 이득과 5.88GHz의 대역폭을 갖는다. 수동 인덕터 소자를 사용하는 대신 네거티브 임피던스 컨버터 회로를 적용함으로써 $0.088mm^2$의 매우 작은 칩 사이즈를 갖는다.
A 40 Gb/s transimpedance amplifier IC was designed and fabricated with a InP/InGaAs HBTs technology. In this study, we interconnect 40Gbps trans impedance amplifier IC to a duroid substrate by a flip chip bonding instead of conventional wire bonding for interconnection. For flip chip bonding, we developed fine pitch bump with the $70{\mu}m$ diameter and $150{\mu}m$ pitch using WLP process. To study the effect of WLP, electrical performance was measured and analyzed in wafer and package module using WLP. The Small signal gains in wafer and package module were 7.24 dB and 6.93dB respectively. The difference of small signal gain in wafer and package module was 0.3dB. This small difference of gain is due to the short interconnection length by bump. The characteristics of return loss was under -10dB in both wafer and module. So, WLP process can be used for millimeter wave GaAs MMIC with the fine pitch pad and duroid substrate can be used in flip chip bonding process.
This paper presents a 16-channel transimpedance amplifier (TIA) array implemented in a standard $0.18-{\mu}m$ CMOS technology for the applications of panoramic scan LADAR (PSL) systems. Since this array is the front-end circuits of the PSL systems to recover three dimensional image for unmanned vehicles, low-noise and high-gain characteristics are necessary. Thus, we propose a voltage-mode inverter TIA (I-TIA) array in this paper, of which measured results demonstrate that each channel of the array achieves $82-dB{\Omega}$ transimpedance gain, 565-MHz bandwidth for 0.5-pF photodiode capacitance, 6.7-pA/sqrt(Hz) noise current spectral density, and 33.8-mW power dissipation from a single 1.8-V supply. The measured eye-diagrams of the array confirm wide and clear eye-openings up to 1.3-Gb/s operations. Also, the optical pulse measurements estimate that the proposed 16-channel TIA array chip can detect signals within 20 meters away from the laser source. The whole chip occupies the area of $5.0{\times}1.1mm^2$ including I/O pads. For comparison, a current-mode 16-channel TIA array is also realized in the same $0.18-{\mu}m$ CMOS technology, which exploits regulated-cascode (RGC) input configuration. Measurements reveal that the I-TIA array achieves superior performance in optical pulse measurements.
본 논문에서는 TSMC 0.25 ${\mu}m$ CMOS RF-Mixed mode 공정 기술을 이용하여 초고속 광통신 시스템의 수신부에 사용되는 광대역 transimpedance amplifier를 설계하였다. 특히 광대역을 구성하기 위해 cascode와 common-source 구조에 active inductor shunt peaking을 이용하여 설계 및 제작하였으며, 측정 결과 gain 변화 없이 -3 dB 대역폭 특성이 cascode는 0.8 GHz에서 $81\%$ 증가한 1.45 GHz, common-source는 0.61 GHz에서 $48\%$ 증가한 0.9 GHz 결과가 나왔으며, 전체 파워 소비는 바이어스 2.5 V를 기준으로 37 mW와 45 mW이며, transimpedance gain은 61 dB$\Omega$과 61.4 dB$\Omega$을 얻을 수 있었다. 그리고 input noise current density도 상용 TIA와 거의 비슷한 $5 pA/\sqrt{Hz}$와 $4.5 pA/\sqrt{Hz}$를 가지며, out put Return loss는 전 대역에서 -10 dB 이하의 정합 특성을 보였다. 그리고 전체 chip 사이즈는 $1150{\times}940{\mu}m^2$이다.
LTV(Light to Voltage) 변환을 위한 APD(Avalanche Photo Diode)는 다른 PD(Photo Diode)와 다르게 높은전압의 동작영역을 사용하므로 TIA(Transimpedance Amplifier) 사용시 과전류 방지를 위해 Quenching 저항을 직렬로 연결하여야 한다. 그러한 경우 Quenching 저항이 TIA 전달함수에 영향을 미쳐 안정도에 심각한 결과를 초래할 수 있다. 본 논문에서는 APD Quenching 저항이 TIA의 전압과 전류 루프 전달함수에 미치는 영향을 분석하여 안정도 개선을 위한 Quenching 저항 값 결정 방법을 제안하고자 한다. 제안된 방법에 의하여 Quenching 저항을 가지는 TIA 회로를 설계하여 시뮬레이션 및 칩 제작을 통하여 동작의 안정도를 검증하였다.
본 논문에서는 4 Mb/s 부터 100 Mb/s 의 IrDA(Infrared Data Association) 응용이 가능한 CMOS infrared (IR) wireless data link IC의 설계 방법에 대해 기술한다. 이 모듈은 60 dB에서 100 dB가지의 이득 범위를 가지는 variable gain transimpedance amplifier, AGC(automatic gain control) 회로, AOC(automatic offset control) loop, 4 PPM (pulse position modulation) modulator/demodulator와 DLL(delay locked loops)로 구성된다. 본 적외선 광송수신 IC는 0.25 um 1-poly 5-metal CMOS 공정을 이용하여 제작되었다. 2.5 V 전원 전압에서 동작시켰으며 100 Mb/s에서 출력단 버퍼를 제외하고 25 mW의 진력을 소모한다. 칩의 크기는 1.5 mm $\times$ 1 mm이다.
JSTS:Journal of Semiconductor Technology and Science
/
제14권4호
/
pp.443-450
/
2014
This paper presents a 20-Gb/s optical receiver circuit fabricated with standard 65-nm CMOS technology. Our receiver circuits are designed with consideration for parasitic inductance and capacitance due to bonding wires connecting the photodetector and the circuit realized separately. Such parasitic inductance and capacitance usually disturb the high-speed performance but, with careful circuit design, we achieve optimized wide and flat response. The receiver circuit is composed of a transimpedance amplifier (TIA) with a DC-balancing buffer, a post amplifier (PA), and an output buffer. The TIA is designed in the shunt-feedback configuration with inductive peaking. The PA is composed of a 6-stage differential amplifier having interleaved active feedback. The receiver circuit is mounted on a FR4 PCB and wire-bonded to an equivalent circuit that emulates a photodetector. The measured transimpedance gain and 3-dB bandwidth of our optical receiver circuit is 84 $dB{\Omega}$ and 12 GHz, respectively. 20-Gb/s $2^{31}-1$ electrical pseudo-random bit sequence data are successfully received with the bit-error rate less than $10^{-12}$. The receiver circuit has chip area of $0.5mm{\times}0.44mm$ and it consumes excluding the output buffer 84 mW with 1.2-V supply voltage.
본 논문에서는 병렬식 광 인터컨넥트 응용을 위한 멀티채널 광수신기 어레이를 구현한다. 0.8$\mu$m Si/SiGe HBT 공정을 이용하여 설계한 수신기 어레이는 4채널의 전치증폭기 (transimpedance amplifier 혹은 TIA)와 PIN 광다이오드를 포함하는데, TIA는 일반적인 에미터 접지 (common-emitter 혹은 CE) 입력단을 취한다. 측정결과로서, CE TIA 어레이는 3.9GHz 주파수 대역폭과 62dB$\Omega$ 트랜스 임피던스 이득, 7.SpA/sqrt(Hz) 평균 노이즈 전류 스펙트럼 밀도 및 -2SdB 채널 간 crosstalk 성능을 가지며, 4채널 전체 모듈이 40mW 전력소모를 보인다.
본 논문에서는 0.18um CMOS(1P4M) 공정을 이용하여 HDMI용 액티브 광케이블에 적합한 채널당 2.5-Gb/s의 동작 속도를 갖는 광 수신기를 구현하였다. 광 수신기는 차동 증폭구조를 가지는 트랜스임피던스 증폭기, 5개의 증폭단을 갖는 리미팅 증폭기, 출력 버퍼단으로 구성된다. 트랜스임피던스 증폭기는 피드백 저항을 가진 인버터 입력구조로 구현함으로써 낮은 잡음지수와 작은 전력소모를 갖도록 설계하였다. 연이은 차동구조 증폭기 및 출력 버퍼단을 통해 전체 전압이득을 증가하였고, 리미팅 증폭단과의 연동을 용이하게 했다. 리미팅 증폭기는 다섯 단의 증폭단과 출력 버퍼단, 옵셋 제거 회로단으로 이루어져 있다. 시뮬레이션 결과, 제안한 광 수신기는 $91dB{\Omega}$ 트랜스임피던스 이득, 1.55 GHz 대역폭(입력단 0.32 pF의 포토다이오드 커패시턴스 포함), 16 pA/sqrt(Hz) 평균 잡음 전류 스펙트럼 밀도, 및 -21.6 dBm 민감도 ($10^{-12}$ BER)를 갖는다. 또한, DC 시뮬레이션 결과, 1.8-V의 전원전압에서 총 40 mW의 전력을 소모한다. 제작한 칩은 패드를 포함하여 $1.35{\times}2.46mm^2$의 면적을 갖는다. optical eye-diagram 측정 결과, 2.5-Gb/s 동작속도에서 크고 깨끗한 eye-diagram을 보인다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.