• Journal of Korean Clinical Nursing Research
• /
• v.18 no.1
• /
• pp.13-28
• /
• 2012

Purpose: This study was conducted to develop standards ensuring nursing process-based fluid intake/output and tube care, and to develop a performance measurement tool evaluating the level of care according to the standards, and finally to determine validity of the standards and the tool. Methods: The standards and the tool were reviewed by a panel of experts and refined based on the panel's suggestions. Validity of the standards and the tool were examined using a survey of 293 hospital nurses. Results: The mean validity scores of the performance measurement standards and the tool were 3.86 and 4.02, respectively, out of 5.00. So the performance measurement standards and the tool in this study were found to be acceptable in evaluating quality of nursing care for fluid intake/output and tubes. Conclusion: This result indicates that the performance measurement standards and the tool developed in this study are valid instruments to monitor and improve quality of nursing care for fluid intake/output and tube interventions, such as intravenous catheters, nasogastric tube and urinary catheters.

• Journal of Korean Clinical Nursing Research
• /
• v.17 no.2
• /
• pp.123-137
• /
• 2011

Purpose: This study was conducted to develop standards ensuring nursing process-based care of patient admission and discharge, to develop a performance measurement tool evaluating the care applied according to the standards, and finally to determine validity of the standards and the tool. Methods: The standards and the tool were reviewed by a panel of experts and refined based on the panel's suggestions. Validity of the standards and the tool were examined through surveying a total of 302 hospital nurses. Results: The mean validity scores of the performance measurement standards and the tool were 4.11 and 4.09, respectively, out of 5.00. So the performance measurement standards and the tool in this study were found to be acceptable in evaluating quality of nursing care provided at patient admission and discharge. Conclusion: This result indicates that the performance measurement standards and the tool developed in this study are valid instruments to monitor and improve quality of nursing care for patient admission and discharge.

• Journal of Information Technology Applications and Management
• /
• v.16 no.1
• /
• pp.77-96
• /
• 2009

The balanced scorecard has drawn attention from many researchers in various fields since its appearance in 1992. It became a norm for performance evaluation framework in many areas, such as marketing, information system evaluation, strategic planning, etc. Centered in the large companies in Korea, the balanced scorecard has been popularly used as a performance evaluation tool for human resource management. Now we Question its applicability to performance evaluation tool even in small business. This study tried to apply the balanced scorecard in developing an information system for performance evaluation in a small business. The study showed that the balanced scorecard can be nicely used in small business as a performance evaluation tool. The process of developing an information system is described in detail. The practitioners are to obtain a lot of insights in designing their human resource management systems from the study results.

• Journal of Information Technology Applications and Management
• /
• v.25 no.1
• /
• pp.47-66
• /
• 2018

The development of IT is transforming from the way it has been working face-to-face in performing projects to the online collaboration method using web-based tools. Therefore, various online collaboration tools are being developed and commercialized, including 'Google Docs', which is called the online office. Using these online collaboration tools, users can share documents with other users and collaborate in real time. Therefore, in recent years, companies and educational institutions have been using online collaboration tools to carry out tasks and projects that require collaboration. Various factors can affect the project performance satisfaction through online collaboration tools. In this regard, it is necessary to confirm the factors affecting the satisfaction of the project performance. However, there is not enough empirical research on the satisfaction of the performance through the online collaboration tool. Therefore, this study will investigate the mechanism of project performance satisfaction through online collaboration tool considering the Individual characteristics of the project performing subject, the relationship characteristics between the project members, and the system characteristics of the collaboration tool.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.10 s.253
• /
• pp.957-965
• /
• 2006

A high-performance hot chuck is designed as a heating device for an ultra-precision flip-chip bonder with infrared alignment system. Analysis of design requirements for thermal performance leads to a radiative heating mechanism employing two halogen lamps as heating source. The heating tool is made of silicon carbide characterized by high thermal diffusivity and small thermal expansion coefficient. Experimental tests are performed to assess heat-up performance and temperature uniformity of the heating tool. It is revealed that the initial design of hot chuck results in a good heat-up speed but there exist a couple of troubles associated with control and integrity of the device. As a means to resolve the raised issues, a revised version of heating tool is proposed, which consists of a working plate made of silicon carbide and a supporting structure made of stainless steel. The advantages of this two-body heating tool are discussed and the improved features are verified experimentally.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.763-769
• /
• 2010

Thanks to the rapid advancement of computational power and development of numerical methods, Computational fluid dynamics techniques are being used widely for the prediction of ship resistance performance. In the present study, an automatic tool was developed to facilitate hull form modification, consequent mesh generation, and flow analysis for parametric study. It is a tedious job to go back and forth between geometry modification and mesh generation for every hull form variation. With the developed tool, users can make multiple hull form variation and their hull form performance prediction easily in a few simple steps. The verification of the developed tool was done by applying it to resistance performance parametric study of a generic POD propulsion cruise ship with different lengths of bow and stern. It is believed that the tool can be extended to more sophisticated hull form variation and help optimize the ship performance more efficiently.

• Journal of the Korea Society for Simulation
• /
• v.12 no.3
• /
• pp.69-81
• /
• 2003

To manage a cluster of distributed server systems, a number of management aspects should be considered in terms of configuration management, fault management, performance management, and user management. System performance monitoring and reporting take an important role for performance and fault management. In this paper, we present distributed system architecture modeling of a performance monitoring and reporting tool. Modeling architecture of four subsystems are introduced: node agent, data collection, performance management & report, and DB schema. The performance-related information collected from distributed servers are categorized into performance counters, event data for system status changes, service quality, and system configuration data. In order to analyze those performance information, we use a number of ways to evaluate data corelation. By using some results from a real site of a company and from simulation of artificial workload, we show the example of performance collection and analysis. Since our report tool detects system fault or node component failure and analyzes performances through resource usage and service quality, we are able to provide information for server load balancing, in short term view, and the cause of system faults and decision for system scale-out and scale-up, in long term view.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.71-77
• /
• 1999

In this study, Cu ferrite was machined with cermet tool to clarify the machinability. The main conclusions obtained were as follows. The tool wear becomes the smallest at the cutting speed of 90m/min with the depth of cut of 0.2mm. The surface roughness becomes larger with increasing the cutting speed and the chamfer angle. The tool with the chamfer angle of $15{\circ}$ shows the best performance. The surface roughness increases almost proportionally with the increase of the chip size. The tool wear decreases with increasing feed in the depth of cut not more than 0.2mm.

• Journal of Korean Academy of Nursing Administration
• /
• v.23 no.1
• /
• pp.90-100
• /
• 2017

Purpose: The purpose of this study was to develop a tool to evaluate the nursing competency of ambulatory nurses and to verify the reliability and validity of the developed tool for use in general hospitals. Methods: The evaluation tool for ambulatory nursing competency was developed through a literature review and tests for validity and reliability. Results: Subsequent to a review of the literature on nursing performance of ambulatory nurses, a 12 item questionnaire was developed. Through factor analysis, 12 items in a 2 factor solution were derived. Cronbach's ${\alpha}$ coefficient of the final instrument was .86. Conclusion: The assessment tool developed in this study allows for objective assessments of nursing competencies in relation to the competencies expected of ambulatory care nurses. It is hoped that the assessment tool can be used for empirical verification and to provide basic data for establishing the necessary policies to secure outstanding human resources.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.1
• /
• pp.53-62
• /
• 1990

High speed and heavy cutting performed for improving the surface quality and productivity, are often prevented due to chatter phenomena. Chatter is a violent relative vibration between workpiece and tool in machining of metals, and is an important limiting factor of production rate and surface quality, and reduces the tool life and the dynamic performance of machine tool itself. In this study, in order to suppress the chatter, a modified tool-post combined with the spring and damper was designed and used in the actual cutting test. The results of this study are summerized as follows; The spring and damper adopted in the modified tool-post have the suppressing effects of chatter, and there exists an optimum combination between spring constant and damping ratio.