Journal of the Korean Society for Precision Engineering (한국정밀공학회지)
- Volume 16 Issue 12
- /
- Pages.71-77
- /
- 1999
- /
- 1225-9071(pISSN)
- /
- 2287-8769(eISSN)
Cutting of Magnetic Cu Ferrite
Cu 페라이트의 절삭가공
Abstract
In this study, Cu ferrite was machined with cermet tool to clarify the machinability. The main conclusions obtained were as follows. The tool wear becomes the smallest at the cutting speed of 90m/min with the depth of cut of 0.2mm. The surface roughness becomes larger with increasing the cutting speed and the chamfer angle. The tool with the chamfer angle of
Keywords