• 반도체디스플레이기술학회지
• /
• 제15권2호
• /
• pp.55-60
• /
• 2016

This study was developed through the secondary battery module charging/discharger possible utilization in the production process equipment circuit. The developed module is ensuring construction of efficient and productive charging and discharger through this research a limit on the yield and the price of existing single -channel charge and discharger circuit as a 5V 70A grade secondary battery Formation charge and discharger for up to 1 board 4 channels. In order to improve the sensing accuracy, through a robust differential amplifier circuit described using 16bit Analog-Digital Converter and noise was secured 16bit resolution sensing. The configuration also made demands for property Rise / Fall Time. Data Acquisition, discharge efficiency and also to fit the sink circuit temperature level for mass production.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.487-489
• /
• 2005

This paper presents a wavelet-based neural network technology for the detection and classification of the short durations type of power quality disturbances. Transients happen during very short durations to the nano- and microsecond. Thus, a method for detecting and classifying transient signals at the same time and In an automatic combines the properties of the wavelet transform and the advantages of neural networks. Especially, the additional feature extraction to improve the recognition rate is considered. The configuration of the hardware of TMS320C6711 DSP based with 16 channel 20Mhz sampling rate A/D(Analog to Digital) converter and some case studies are described.

• 한국광학회지
• /
• 제12권3호
• /
• pp.184-189
• /
• 2001

편광자나 검광자가 장착된 모터를 회전시키는 기계적인 변조방식이나 압전소자에 조화진동하는 교류전압을 가하는 위상변조방식에 기초를 둔 일반적인 편광변조 및 편광상태 측정 방식에 의존하지 않고 움직이지 않는 광분할기와 편광자를 통과한빛의 세기를 측정하는 DOAP 방식으로 편광상태를 측정하기 때문에 광검출소자 및 전자회로의 반응시간에 의해 그 신간분해능이 결정되는 새로운 방식의 초고속 다원계를 설계하였다. 이 초고속 타원계는 수 ns의 시간분해능을 가지고 있음을 확인하였으며 상변화기구 같은 동적기구를 연구하는 도구로의 응용 가능성을 검토하였다.

• 전자공학회논문지SC
• /
• 제44권6호
• /
• pp.57-65
• /
• 2007

본 논문에서는 DSP(TMS320F2812)를 사용하여 단상 역률개선을 디지털로 설계하였다. 이러한 승압형 역률개선 컨버터를 디지털로 구현하기 위하여 DSP는 컨버터의 입력전압과 인덕터전류, 컨버터의 출력전압이 필요하며 이를 DSP 내부에 있는 12비트 A/D변환기로 구현하였다. 승압을 위한 스위칭소자인 FET가 ON/OFF 될 때 심한 고주파 노이즈와 스위칭 리플이 발생한다. DSP에 의해 구현시 어느 시점에서 A/D 변환을 시작할지 결정하는 것은 대단히 중요하며 스위칭 노이즈가 발생하지 않는 곳에서 A/D 변환을 할 필요가 있다. PWM의 시비율(duty ratio)은 약 5 %에서 95 %까지 가변적이기 때문에 A/D 변환의 고정된 시작점을 찾을 수는 없다. 따라서 본 논문에서는 25 us 마다 PWM의 ON/OFF 폭을 미리 예측한 후 타이머를 이용하여 A/D 변환을 하도록 하였다. 실험 결과들로부터 광범위한 입력전압에 대하여 약 0.99의 역률과 80 Vdc 출력 전압에 대한 리플이 약 5 Vpp임을 확인하였다. 또한 윈도우즈 Xp 환경 하에서 수행되는 응용프로그램을 작성하여 원격에서 단상 PFC 컨버터의 각종 파라미터들과 전압 및 전류 제어기의 이득들을 모니터링하며 원격제어가 가능함을 보여 상용화의 가능성과 유용성을 제시하였다.

• 한국통신학회논문지
• /
• 제22권8호
• /
• pp.1774-1781
• /
• 1997

본 논문은 잔류 측대파(vestigial sideband; VSB) 변조를 이용한 CATV 및 HDTV에서 주파수 및 위상 동기 루프 (frequency & phase lock loop; FPLL)의 완전 디지털 구현을 위한 알고리듬과 하드웨어 구조를 제안한다. 미국의 대연합(Grand-Alliance)에서 제안된 VSB 변조를 위한 CATV 및 HDTV 수신기는 아날로그 신호처리를 통하여 반송파 복구를 수행한다. 그러므로 향후 단열 칩 ASIC 개발에 상당한 부담을 주는 구조이다. 본 논문에서는 VSB 변조 방식의 이러한 문제점을 해결하기 위하여 수신된 신호를 기저 대역 근처의 IF 신호로 떨어뜨린 후 아날로그-디지털(AD) 변환을 통하여 모든 신호처리를 디지털 영역에서 할 수 있는 FPLL 구조를 제안한다. 제안된 시스템은 주파수 풀-인(pull-in) 영역이 -200KHz- +250KHz 정도의 우수한 성능을 보여준다. 그리고 위상 잡음의 영향을 최소화 하면서 빠른 포착 성능을 유지하기 위하여 루프 필터의 대역폭을 적응적으로 가변하는 특징을 가진다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1338-1340
• /
• 1987

This paper describes the design of ECG data preprocess module for the ECG signals. This module process the data obtained from two channels. It is composed of the AID converter, QRS detector, one chip micro-computer and memory. This module performs the following functions;digital filtering, R wave detection and determination of reference point for the ST segment. The measured points are transfered to the next data module by the interrupt process. This preprocessor data module is available to the basis for the parallel data processing for the real time automatic diagnosis.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.77-84
• /
• 2006

This paper describes the design and implementation of a robot's gripper control system. In order to safely grasp an unknown object using the robot's gripper, the gripper should detect the force of gripping direction and the force of gravity direction, and should perform the force control using the detected forces and the robot's gripper control system. In this paper, the robot's gripper control system is designed and manufactured using DSP(Digital Signal Processor), and the gripper is composed of two 6-axis force/moment sensors which measures the Fx force(force of x-direction), Fy force, Fz force, and the Mx moment(moment of x-direction), My moment, Mz moment at the same time. The response characteristic test of the system is performed to determine the proportional gain Kp and the integral gain Ki of PI controller. As a result, it is shown that the developed robot's gripper control system grasps an unknown object safely.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.75-76
• /
• 2006

A new broadcasting standard for Digital Multimedia Broadcasting(DMB) has been announced in Korea to provide audio, video, and data broadcasting services. There exist two types of DMB; terrestrial DMB and satellite DMB. And in order to service DMB on the single system, the integration of RF module is required. In this paper, we describe an integrated RF tuner module that can receive T-DMB and S-DMB at the same time, which includes an L-band down-converter, a Band III tuner, and a S-DMB tuner.

• 전기학회논문지P
• /
• 제51권1호
• /
• pp.52-54
• /
• 2002

This research presented in this paper focuses on a system development for checking stator's wedge of large generator in heavy industry. The system is composed of impactor, A/D converter and digital signal processing board. Also this paper proposes a method for detection of stator's insulating state using analysis algorithm. As developed impact system is acting, impact wave is generated real time and transferred data to microprocessor. Using communication program this signal move microprocessor to hard directory of note book with 1000 data/sec. The developed system and analysis program performed very well by real stator's wedge in large generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.216-218
• /
• 2001

The transformer role is very important in power system operation and control; also its price is very expensive. Therefore many kinds of the efforts for transformer protection have been executed. So for as, current differential relay(87) has been mainly used for transformer protection. But current differential relaying method has several troubles as followings. Differential current can be occurred by transformers inrush current between winding1 and winding2 of transformer when transformer is initially energized. Also harmonic restrained element used in current differential relaying method is one of the causes of relays mal-operation because recently harmonics in power system gradually increase by power switching devices(SVC, FACTS, DSC, etc). Therefore many kinds of effort have been executed to solve the trouble of current differential relay and one of them is method using ratio of increment of flux linkages(RIFL) of the primary and secondary windings. This paper introduces a novel protective relay for power transformers using RIFL of the primary and secondary windings. Novel protective relay successfully discriminates between transformer internal faults and normal operation conditions including inrush and this paper includes real time test results using RTDS(Real Time Digital Simulator) for novel protective relay. A novel protective relay was designed using the TMS320C32 digital signal processor and consisted of DSP module. A/D converter module, DI/DO module, MMI interface module and LCD display module and developed by Xelpower co., Ltd.