• Diabetes and Metabolism Journal
• /
• v.42 no.6
• /
• pp.480-487
• /
• 2018

Background: This study aimed to evaluate the relationship between the frequency of self-monitoring of blood glucose (SMBG) and glycosylated hemoglobin (HbA1c) levels among Korean adolescents with type 1 diabetes mellitus (T1DM). Factors affecting the SMBG frequency were analyzed in order to improve their glycemic control. Methods: Sixty-one adolescents aged 13 to 18 years with T1DM were included from one tertiary center. Clinical and biochemical variables were recorded. Factors associated with SMBG frequency were assessed using structured self-reported questionnaires. Results: Average total daily SMBG frequency was $3.8{\pm}2.1$ and frequency during the school day was $1.3{\pm}1.2$. The mean HbA1c level was $8.6%{\pm}1.4%$. As the daily SMBG frequency increased, HbA1c levels declined (P=0.001). The adjusted odds of achieving the target HbA1c in participants who performed daily SMBG ${\geq}5$ significantly increased 9.87 folds (95% confidence interval [CI], 1.58 to 61.70) compared with those performed SMBG four times a day. In the subjects whose SMBG frequency <1/day during the school day, an 80% reduction in the adjusted odds ratio 0.2 (95% CI, 0.05 to 0.86) showed compared to the group with performing two SMBG measurements in the school setting. The number of SMBG testing performed at school was significantly high for individuals assisted by their friends (P=0.031) and for those who did SMBG in the classrooms (P=0.039). Conclusion: Higher SMBG frequency was significantly associated with lower HbA1c in Korean adolescents with T1DM. It would be necessary to establish the school environments that can facilitate adequate glycemic control, including frequent SMBG.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.262-268
• /
• 2008

A compact imaging spectrometer (COMIS) for use in the STSAT3 microsatellite is currently under development. It is scheduled to be launched into a low Sun-synchronous Earth orbit (${\sim}700km$) by the end of 2010. COMIS was inspired by the success of CHRIS, which is a small hyperspectral imager developed for the ESA microsatellite PROBA. COMIS is designed to achieve nearly equivalent imaging capabilities of CHRIS in a smaller (65 mm diameter and 4.3 kg mass) and mechanically superior (in terms of alignment and robustness) package. Its main operational goal will be the imaging of Earth's surface and atmosphere with ground sampling distances of ${\sim}30m$ at the $18{\sim}62$ spectral bands ($4.0{\sim}1.05{\mu}m$). This imaging will be used for environmental monitoring, such as the in-land water quality monitoring of Paldang Lake, which is located next to Seoul, South Korea. The optics of COMIS consists of two parts: imaging telescope and dispersing relay optics. The imaging telescope, which operates at an f-ratio of 4.6, forms an image (of Earth's surface or atmosphere) onto an intermediate image plane. The dispersion relay optics disperses the image and relay it onto a CCD plane. All COMIS lenses and mirrors are spherical and are made from used silica exclusively. In addition, the optics is designed such that the optical axis of the dispersed image is parallel to the optical axis of the telescope. Previous efforts focused on manufacturing ease, alignment, assembly, testing, and improved robustness in space environments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.4
• /
• pp.324-332
• /
• 2018

We conducted a questionnaire survey to analyze the current status of the coastal composite fisheries, as well as the improvement point in designing a new type coastal composite fishing boat suitable for Korean fishing environments from April to August 2017. The questionnaire composed of 20 questions about the features of the coastal composite fishing boat and fishing work. The survey sites were selected to cover all parts of the country by considering the geographical position. The significance testing for the response results was accessed by ${\chi}^2$ test and ANOVA. The results revealed that more than half (59.1%) of the fishermen operated one day per voyage and operating alone topped with 22.5% in the number of crews, followed by 2 persons (20.3%) and 5 persons (22.1%). The navigation devices had a high rate of installation and GPS plotter ranked first in the devices. In addition, fish finder ranked first in fishing equipment, followed by net hauler. The most inconvenient work that they felt during the fishing operation was fish handing at 49.8% and other general fishing works like setting and hauling line, deck cleaning accounted for about 25%. The hardest work was the accident by ropes wrapped around propeller and the engine trouble came in second. The most inconvenient facilities to the present design of fishing boat was wheelhouse (76.7%), followed by fish hold (38.5%), and deck (35.1%). Furthermore, inconvenient points related to the movement of fishing gear, noise and vibration of engine, slippery deck and small fish hold exceeded 50%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.898-905
• /
• 2018

In this work, infrared targets for a developed hardware-in-the-loop simulation(HILS) system are proposed for a performance test of a dual-sensor imaging seeker equipped with an infrared and a visible sensor that can lock and track for ground and air targets. This integrated system is composed of 100 modules of heat and light sources to simulate various kinds of target and the trajectory of moving targets based on scenarios. It is possible to simulate not only the position, velocity, and direction for these targets but also background clutter and jamming environments. The design and measurement results of an infrared target, such as the HILS system configuration, developed for testing and evaluation of a dual-sensor imaging seeker are described. In the future, it is planned to test the lock-on and tracking performance of an imaging seeker equipped with single or dual sensors dynamically in real time based on a simulation flight scenario in the developed HILS system.

• Korean Journal of Materials Research
• /
• v.28 no.12
• /
• pp.738-747
• /
• 2018

For the aerospace structural application of high-strength 2xxx series aluminum alloys, stress corrosion cracking(SCC) behavior in aggressive environments needs to be well understood. In this study, the SCC sensitivities of 2024-T62, 2124-T851 and 2050-T84 alloys in a 3.5 % NaCl solution are measured using a constant load testing method without polarization and a slow strain rate test(SSRT) method at a strain rate of 10-6 /sec under a cathodic applied potential. When the specimens are exposed to a 3.5 % NaCl solution under a constant load for 10 days, the decrease in tensile ductility is negligible for 2124-T851 and 2050-T84 specimens, proving that T8 heat treatment is beneficial in improving the SCC resistance of 2xxx series aluminum alloys. The specimens are also susceptible to SCC in a hydrogen-generating environment at a slow strain rate of $10^{-6}/sec$ in a 3.5 % NaCl solution under a cathodic applied potential. Regardless of the test method, low impurity 2124-T851 and high Cu/Mg ratio 2050-T84 alloys are found to have relatively lower SCC sensitivity than 2024-T62. The SCC behavior of 2xxx series aluminum alloys in the 3.5 % NaCl solution is discussed based on fractographic and micrographic observations.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.11-18
• /
• 2021

Respiratory viruses (RVs) cause infections in hospital environments through direct contact with infected visitors. In infection control, it causes major problems of acquired infections in hospitals by respiratory viruses. The surveillance data derived from clinical laboratories are often used to properly allocate medical resources to hospitals and communities for treatment, consumables, and diagnostic product purchases in the institutions and public health sectors that provide health care. An early diagnosis is essential in infection with respiratory viruses, and methods that can be used in diagnostic methods using respiratory samples include virus culture, molecular diagnosis, and analysis. A microchip provides a new strategy for developing a more diverse and powerful technology called point-of-care testing. The importance of the respiratory system should be applied strictly to the infection control guidelines to ensure the occupational health and safety of health care workers. Evidence of clinical efficacy, including this study, is challenging the long-standing paradigm for infection propagation. Additional assistance will be needed for frequent tests to detect respiratory viruses in inpatients who have begun to show new respiratory symptoms indicating infections requiring efforts to control the infection.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.35-41
• /
• 2022

UAM (Urban Air Mobility) is a new safe, secure, and more sustainable air transportation system for passengers and cargo in urban environments. Commercial operations of UAM are expected to start in 2025. Since production rates of UAM are expected to be closer to cars than conventional aircraft, the airworthiness methodology for UAM must be prepared for mass production. Composite materials are expected to be mainly used for UAM structures to reduce weight. In this paper, the composite material qualification method was derived and the materials were applied for small aircraft application. It is expected to reduce the airworthiness certification time by applying composite material qualification system and its database.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.3
• /
• pp.157-163
• /
• 2022

An automatic mooring system for a ship consists of a vacuum suction pad and a mechanical part, enabling quick and safe mooring of a ship. In the development of a mooring system, the design of a vacuum suction pad is a key to secure enough mooring forces and achieve stable operation of a mooring system. In the vacuum suction pad, properly designing its rubber seal determines the performance of the suction pad. Therefore, it is necessary to appropriately design the rubber seal for maintaining a high-vacuum condition inside the pad as well as achieving its mechanical robustness for long-time use. Finite element analysis for the design of the rubber seal requires the use of an appropriate strain energy function model to accurately simulate mechanical behavior of the rubber seal material. In this study, we conducted simple uniaxial tensile testing of Chloroprene Rubber (CR) to explore the strain energy function model best-fitted to its experimentally measured engineering strain-stress curves depending on various temperature environments. This study elucidates the temperature-dependent mechanical behaviors of CR and will be foundational to design rubber seal for an automatic mooring system under various temperature conditions.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2022

Telemetry system is a system that measures and transmits status information in the aircraft to the ground. The data received from the ground is information for monitoring the state of the aircraft, and can be checked and analyzed in real time through the test program. Data processing test system for telemetry currently in operation is built to transmit data using wired communication and perform test. As smart devices become popular due to the continuous development of information and communication technology, wireless communication networks are becoming important, and technologies for improving performance are steadily being developed. In this paper, we suggests and builds data processing ground test system for telemetry using wireless communication(Wi-Fi) that can be checked through smart devices such as tablets, in order to break away from the existing method and apply future-oriented technology. Finally, the suggested test system performance was proved by testing in various environments by linking test equipment and test program.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.28 no.2
• /
• pp.204-217
• /
• 2022

Purpose: This study was conducted to determine the factors affecting a hypothetical model of testing for general hospital nurses' job embeddedness. Methods: Data were collected from August 20 to September 19, 2021, by a self-administered questionnaire answered by 428 general hospital nurses. The data were analyzed by SPSS and AMOS. Results: Nine of the hypothetical model's 12 hypotheses were supported by the data collected from all participants. The test results indicate that ego resilience, subjective career success, and recovery experience from job stress directly affect participants' job embeddedness. Nurses' work environments were reported to affect ego resilience and subjective career success, while at the same time ego resilience and subjective career success affected the participants' job embeddedness. Work-life balance was found to affect ego resilience and ego resilience affected subjective career success, and at the same time subjective career success directly affected participants' recovery experiences from job stress and job embeddedness. Of these variables, subjective career success had the strongest direct effect on participants' job embeddedness. Work-life balance affected the participants' recovery experiences from job stress, and their recovery experiences from job stress were found to directly affect job embeddedness. Conclusion: These results suggest that different management strategies to enhance hospital nurses' job embeddedness should address nurses' ego resilience, subjective career success, and recovery experiences from job stress.