• 제목/요약/키워드: Tailings

검색결과 254건 처리시간 0.027초

양양철광산 선광 부산물의 순환자원화 (Recycling of the Waste Rock and Tailings from Yangyang Iron Mine)

  • 정문영;안용현;김영훈
    • 자원리싸이클링
    • /
    • 제25권4호
    • /
    • pp.23-31
    • /
    • 2016
  • 양양철광산 선광 부산물(폐석, 광미)의 폐기물공정시험기준에 의한 중금속용출량은 환경기준값 보다 낮아 유해성이 없으므로 그 자체를 물질전환법에 의해 순환자원화 하는 데는 문제가 없다. 선광 광미를 시멘트 부원료로 사용할 경우에는 시멘트 품질안정성 차원에서 전 알카리($R_2O$)함량이 포틀랜드 시멘트(KS L 5201) 품질 기준치인 0.6%를 초과하지 않도록 광미 첨가량을 3%이하로 사용하는 것이 좋다고 판단된다. 재활용 점토벽돌(KS I 3013) 1종 규격에 부합되는 비소성 에코벽돌은 무기결합제의 15%를 광미로 그리고 일반잔골재의 100%를 철광산 폐석으로 대체하여 제조 가능하였다. 이처럼 선광 부산물을 시멘트 부원료 및 비소성 에코벽돌로 순환자원화함으로서 광미 적치장의 축소 및 유지관리비용 절감 그리고 에너지 사용 및 $CO_2$ 발생 절감으로 환경적 효과 및 경제적 효과를 동시에 얻을 수 있을 것이다.

상동광산 광미를 콘크리트용 혼화재료로 사용하기 위한 모르타르의 품질특성 (The Quality Properties of Mortar for Using Tailings from the Sangdong Tungsten One as Admixture for Concrete)

  • 최연왕;정문영;정명채;구기정
    • 콘크리트학회논문집
    • /
    • 제16권3호
    • /
    • pp.383-390
    • /
    • 2004
  • 본 연구에서는 상동지역 중석광 광미를 콘크리트용 혼화재료로 사용 가능한지 여부를 알아보기 위한 연구의 일환으로 광미의 품질특성과 혼화재료로 사용한 모르타르의 기초적 특성에 대하여 검토하였다. 상동지역 중석광 광미의 품질 특성을 파악하기 위해 XRD 및 PSA를 사용하여 광물학적인 특성을 검토하였다. XRD분석 결과 상동지역 중석광 광미내에는 석영(quartz), 녹니석(chlorite), 회장석(anorthite) 및 코디에라이트(cordierite) 등이 함유되어 있는 것으로 파악되었다. 또한, 상동지역 중석광 광미의 중금속 용출 특성을 파악하기 위해 광미를 혼합한 모르타르를 제작하여 KSLT의 규정에 의해 실험한 결과 규준범위를 만족하였다. 한편, 상동지역 중석광 광미를 혼합한 시멘트 모르타르의 응결시간과 압축강도 특성을 검토한 결과 광미의 혼합률이 증가할수록 응결시간은 지연되었고, 모르타르 압축강도는 감소하는 경향을 나타내었다.

휴/폐광 금은광산 주변의 토양오염조사와 복구시스템 연구 (Investigation on soil contamination and its remediation system in the vicinity of abandoned Au-Ag mine in Korea)

  • 정명채
    • 자원환경지질
    • /
    • 제32권1호
    • /
    • pp.73-82
    • /
    • 1999
  • The objectives of this study are to investigate soil contamination in the vicinity of abandoned Au-Ag mine and to apply a remediation technique of liming to tailings. In the study area of the Imcheon Au-Ag mine, soils were sampled in and around the mine the analyzed by Atomic Absorption Spectrometry extracted by both 0.1N HCl and aqua regia. Elevated levels of Cd, Cu, Pb and Zn concentrations extracted by 0.1N HCl were found in soils taken from tailings site. These high contents directly influenced metal concentrations in soils taken in the vicinity of the site. This is mainly due to clastic movement by wind and effluent of mine waste water. In addition, relatively enriched concentrations of the metals were found in soils extrated by aqua regia due to strong decomposition of the samples compared with 0.1N HCl extration. According to the statistical approach, metal concentrations in soils by 0.1N HCl had a positive correlation with those by aqua regia extraction. Mine waste waters and stream waters were also sampled around the mine in spring and summer and analyzed by AAS for Cd, Cu, Pb and Zn, and by Ion Chromatography for anions. Like soils developed over tailings, significant levels of metals and sulphates were found in the mine waste waters ranging of 0.2~0.3, 0.5~2.0, 0.2~2.8, 30~50 and 1,240~4,700 mg/l of Cd, Cu, Pb, Zn and $SO_4^{2-}$, respectively. These elevated levels influenced in the stream waters in the vicinity of the tailings site. In seasonal variation of metal and anion contents, relatively high levels were found in waters sampled on summer due to leaching the metals and anions from tailings by rain. This study also examined the possibility of lime treatment for remediation of acid mine tailings and assumed to be 46 tones of pulverized lime for neutralization of the tailings.

  • PDF

황철석과 토착미생물이 광미를 활용한 전기 생산에 미치는 영향 (Effect of Pyrite and Indigenous Bacteria on Electricity Generation Using Mine Tailings)

  • 주원정;조은혜;남경필
    • Ecology and Resilient Infrastructure
    • /
    • 제2권1호
    • /
    • pp.93-98
    • /
    • 2015
  • 본 연구는 산성광산배수를 유발하는 광미를 연료전지 기술에 적용하여 유용하게 활용할 수 있는지 알아보기 위해 수행하였다. 황철석 성분을 함유한 광미와 철산화를 촉진하기 위한 철산화균을 포함한 토착세균을 사용하여 미생물연료전지를 구성하여, 광미 내 황철석 함량이 높을수록 연료전지의 전기적 효율이 향상됨을 확인하였다. 또한, 광미를 활용한 연료전지에서 토착세균 주입을 통해 전류밀도와 전력밀도를 각각 3배, 10배 정도 향상시켜, 철산화에 관여하는 미생물의 주입이 광미를 이용한 연료전지 효율 향상에 도움이 됨을 확인하였다. 본 연구는 광산 지역 토착세균의 생태학적 기능을 연료전지 기술과 활용해 광미로부터 오염유발 우려물질을 저감함과 동시에 전기 생산이 가능함을 확인하여, 광미를 활용한 미생물연료전지 기술이 광미의 무해화 및 전기 생산을 위한 기술로 사용될 수 있음을 보여준다.

폐광지 분포 식물 낙엽의 분해에 미치는 중금속의 영향 (The Effect of Heavy Metal Content on the Decomposition of Plant Litter in the Abandoned Mine)

  • 심재국;손지회;신진호;양금철
    • 한국환경생태학회지
    • /
    • 제24권3호
    • /
    • pp.279-285
    • /
    • 2010
  • 본 연구는 중금속이 낙엽의 분해에 미치는 영향을 알아보기 위하여 충남 청양의 폐금광의 광미에 분포하는 쑥(Artemisia princeps var. orientalis)과 쇠뜨기(Equisetum arvense)를 이용하여 실험하였다. 광미는 높은 중금속 함량과 낮은 유기물 함량을 가지고 있었다. 광미의 중금속 함량은 대조구 토양에 비해 비소(As)는 약 13배, 카드뮴(Cd)은 약 28배 높은 것으로 나타났다. 또한 크롬(Cr), 니켈(Ni) 및 아연(Zn)은 약 3배에서 6배 높게 측정되었다. 광미와 대조구 토양에서 채집한 식물체내의 중금속 함량은 광미에서 채집한 식물에서 현저히 높게 나타났으며, 쑥 잎의 경우 As는 약 23배, Cd은 25배 높게 나타났으며, 쇠뜨기 지상부의 경우 As는 58배, Cd은 11배 높은 것으로 나타났다. 대조구에서 분해 결과 중금속 농도가 높은 쑥의 잎과 대조구에서 채취한 잎이 각각 50.4%, 65.7%가 분해되었다. 또한 광미에서 진행된 분해 결과 쑥의 잎은 폐광지역에서 채취한 잎과 대조구에서 채취한 잎이 각각 31.6%, 57.5%가 분해되었다. 쑥의 줄기의 분해결과도 잎의 분해율과 비슷한 양상을 나타내었다. 쇠뜨기의 지상부의 분해는 대조구에서 분해된 결과 광미에서 채집된 쇠뜨기와 대조구에서 채집한 쇠뜨기가 각각 77.8%와 89.3%가 분해되었으며, 광미지역에서 분해 결과 각각 67.6%와 82.1%가 분해된 것으로 나타났다. 따라서 광미에서 생육하는 식물체의 중금속의 함량이 높을수록 분해가 느린 것으로 나타났으며, 이는 중금속이 낙엽의 분해에 영향을 미친 것이라고 판단된다.

부선(浮選) 광미(鑛尾)의 순환자원화(循環資源化)를 위한 비소성(非燒成) 토건재료(土建材料) 개발(開發) (Development of Non-sintered Construction Materials for Resource Recycling of the Flotation Tailings)

  • 김주익;정문영;박제현;이진수
    • 자원리싸이클링
    • /
    • 제20권1호
    • /
    • pp.37-45
    • /
    • 2011
  • 부선 광미의 근원적 처리방안으로 경제성과 환경친화성을 고려히여 비소성 토건재료로 순환자원화 하는 연구를 수행하였다. 순신광산 광미의 평균입도는 $220\;{\mu}m$이고 삼광광산 광미의 평균입도는 $140\;{\mu}m$이었다. 따라서 이들 광미의 입도 특성을 고려하여 순신광산 광미는 비소성 투수블록의 원료 그리고 삼광광산 광미는 비소성 에코벽돌의 원료로 사용하여 제조한 시험체의 여러 특성을 조사하였다. 순신광산 광미 25 wt%이하의 배합조건에서 제조한 비소성 투수블록 시험체의 압축강도는 한국환경산업기술원(KEITI)에서 제시하고 있는 투수콘크리트 제품 규격(EL 245)인 14.70MPa 이상을 만족하였다. 그러나 투수계수 측정결과, 투수콘크리트 제품 규격(EL 245)인 $1.0{\times}10^{-2}\;cm/sec$ 이상을 만족하지 못하였다. 한편, 삼광광산 광미 40 wt% 이하의 배합조건에서 제조한 비소성 에코벽돌 시험체는 소성점토벽돌(KS L 4201) 3종 규격을 만족하였다. 또한 중금속용출시험(KSLT) 결과, 비소성 에코벽돌 시험체의 환경안정성이 확인되었다.

Vertical variations of heavy metals in tailings site of the Sangdong W mine, Korea

  • Jung Myungchae;Jung Moonyoung;Choi Yunwang;Kang Manhee
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.511-514
    • /
    • 2003
  • The objective of this study is to investigate the vertical variation of heavy metals in tailings from the Sangdong W mine. Tailings samples were taken at 6 drilling sites with 50cm intervals up to 21 meters in depth and dried at room temperature. The pH value, loss-on-ignition and water contents were measured. In addition, chemical compositions of the samples were determined by AAS after 0.1 N HCl leaching and ICP-AES after aqua regia leaching. The pH values were in the range of 7.4 to 9.5 due to chemical reactions of carbonate minerals. The ranges of heavy metals (mg/kg) extracted by 0.1N HCl were from 0.17 to 0.93 for Cd, 0.04 to 4.39 for Cu, 0.03 to 10.9 for Pb and 0.06 to 14.1 for Zn and those extracted by aqua regia were $3.10\~10.5,\;23.61\~251,\;63.7\~337\;and\;42.6\~134$ for Cd, Cu, Pb and Zn, respectively. Generally, the metal concentrations in tailings extracted by 0.1N HCl decreased with depth, whilst those extracted by aqua regia have a tendency to increase with depth in some case. Those trends might be due to the change of oxidation-reduction condition of the tailings.

  • PDF

진곡광산 광미와 주변 토양의 오염조사 (Analysis of mine tailings, field soils, and paddy soils around Jingok abandoned mine)

  • 김선태;윤양희;박제안;심의섭
    • 한국토양환경학회지
    • /
    • 제4권2호
    • /
    • pp.175-183
    • /
    • 1999
  • 진곡광산의 광미와 주변 밭과 논의 토양에서의 중금속과 시안의 오염도에 대해 조사하였다. 광미 중의 As, Cd, Cu, Hg, Pb, Zn및 CN ̄의 평균농도는 각각 3.94$\times$$10^3$, 14.3, 266, 6,13, 4.07$\times$$10^3$, 2.51$\times$$10^3$, 1.19mg/kg이었고 Kloke가 제안한 허용기준치를 이용한 오염지수는 32~58 이었으며 pH 는 약산성이었다. 토양오염공정시험법에 의한 중금속 농도는 광미와 인접한 일부 토양만을 제외하고는 토양환경보전법의 농경지 우려기준이하였다.

  • PDF

무기고화제를 이용한 중금속 오염 광미의 안정화 처리를 위한 기초연구 (A basic study for stabilization of heavy metal contaminated tailings by inorganic binders)

  • 민경원;김태풍;이현철;서의영
    • 산업기술연구
    • /
    • 제29권A호
    • /
    • pp.55-60
    • /
    • 2009
  • Stabilization treatment is one of processes for wastes and their components to reduce their toxicity and migration rates to surroundings. Inorganic binders such as calcium hydroxide, blast furnace slag and red mud were tested for their potential applicability to in-situ stabilization of heavy metal contaminated tailings in the abandoned metal mines. Columns(150mm dia. ${\times}$ 450mm length) filled with mixtures of inorganic binders and tailing from the Geumjang mine with various mixing ratios of binders to tailings, 5%, 7% and 9% were applied artificial rainfall tests for 28 days. Effluents from columns filled with calcium hydroxide and tailing showed high pH's of ~12.5 and a increasing trend of concentration in Pb and Zn with a significant decrease in permeability in terms of elapsed days. Those with burning slag and tailing showed pH's of ~8.5 and significantly low concentrations in heavy metals with a stable permeability. In case of red mud, effluents showed significantly low concentrations in heavy metals but a decreased permeability with pH's of ~10.5. Conclusively, this basic study suggests burning furnace slag be a potential stabilizer for effective treatment of heavy metal contaminated mine tailings.

  • PDF

Liquefaction susceptibility of silty tailings under monotonic triaxial tests in nearly saturated conditions

  • Gianluca Bella;Guido Musso
    • Geomechanics and Engineering
    • /
    • 제36권3호
    • /
    • pp.247-258
    • /
    • 2024
  • Tailings are waste materials of mining operations, consisting of a mixture of clay, silt, sand with a high content of unrecoverable metals, process water, and chemical reagents. They are usually discharged as slurry into the storage area retained by dams or earth embankments. Poor knowledge of the hydro-mechanical behaviour of tailings has often resulted in a high rate of failures in which static liquefaction has been widely recognized as one of the major causes of dam collapse. Many studies have dealt with the static liquefaction of coarse soils in saturated conditions. This research provides an extension to the case of silty tailings in unsaturated conditions. The static liquefaction resistance was evaluated in terms of stress-strain behavior by means of monotonic triaxial tests. Its dependency on the preparation method, the volumetric water content, the void ratio, and the degree of saturation was studied and compared with literature data. The static liquefaction response was proved to be dependent mainly on the preparation technique and degree of saturation that, in turn, controls the excess of pore pressure whose leading role is investigated by means of the relationship between the -B Skempton parameter and the degree of saturation. A preliminary interpretation of the static liquefaction response of Stava tailings is also provided within the Critical State framework.