• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.758-759
• /
• 2008

This paper presents a design of the electromagnetic pump with an tubular type linear induction motor(TLIM). The TLIM was designed for the fluid system, flow rate $15[{\ell}/min]$, and the thrust 39[N] at 0.29[m/s]. The TLIM is compared measurement with analysis. The electromagnetic pump of flow characteristics are calculated by treating TLIM thrust as a source term in the Navier-Stokes equation. The numerical analysis of flow characteristics of the liquid metal is presented for the various condition and discussed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.130-141
• /
• 2008

This paper presents the flow characteristics in the fluid circulation loop using the tubular type linear induction motor(TLIM) electromagnetic pump. A TLIM of thrust 40[N] is analyzed using the equivalent and genetic algorithm for the system The flow characteristics are analyzed by coupling the Maxwell equations with the Navier-Stokes equation with the thrust. The analysis algorithm is developed for analyzing the liquid metal flow in the system for laminar and turbulent flow. And the effect of thrust is analyzed for the flow characteristics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.8
• /
• pp.1062-1068
• /
• 2009

Diacylglycerol (DAG) were synthesized by enzymatic esterification of glyceryl monooleate (GMO) and conjugated linoleic acid (CLA) in a shaking water bath. The reaction was catalyzed by Lipozyme TLIM (immobilized lipase from Thermomyces lanuginosa). Effects of reaction time, molar ratio, enzyme road and molecular sieves were studied. Results of normal-phase high performance liquid chromatography (NP-HPLC) analysis were performed. At 1:1, 2:1 and 3:1 (GMO : CLA) molar ratio and Lipozyme TLIM of 20% amount, DAG were produced in 42.6, 54.4 and 54.6 area% in 1 hr, respectively. When different Lipozyme TLIM amounts (2, 5, 10, 20%) were used with 2:1 (GMO : CLA) molar ratio, DAG were produced 21.4 (24 hr), 51.7 (12 hr), 56.2 (6 hr) and 54.4 (1 hr) area%, respectively. The reaction in the absence of molecular sieves increased DAG contents. The maximum DAG concentration conditions were obtained with molar ratio of 2:1 (GMO : CLA), lipase concentration of 10% (of substrate), 10% molecular sieves and reaction time of 6 hours at 55$^{\circ}C$. Under this reaction condition, produced DAG-rich oil was composed of 69 area% DAG, 7.9 area% TAG, 2 area% FFA, and 21.1 area% MAG.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.612-614
• /
• 1992

This paper presents the analysis method of TLIM, for the purpose of developing linear induction motor drive for elevators. The transfer matrix to multilayer on cylindrical coordinate is derived. The equivalent circuit constructed from coupling complex phasor makes it possible to obtain characteristics of TLIM. The validity of the method lo verified by comparing the experimental and theoretical results for a pilot machine in locked status.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.881_882
• /
• 2009

The purpose of this paper is Characteristics Analysis according to thickness of Secondary Conductor in Tubular Linear Induction Motor(TLIM). Linear motors make good used of several applications as pumps and linear actuator. Characteristic equations of TLIM are obtained form voltage equation. And parameters of voltage equation are calculated.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.270-275
• /
• 2010

An electromagnetic pump using a tubular induction motor (TLIM) has been proposed to pump liquid metal fluids. TLIM has been designed for liquid metal flow systems with a motor with a thrust force of 40~77[N]. The flow characteristics have been investigated by solving the Navier-Stokes equation, where the Lorentz force was included simply by considering it as a constant in the Navier-Stokes equation. A wood metal was chosen to simulate the liquid metal. The effect of Lorentz force on the flow rate was investigated. An experiment was conducted and its results were compared with those of the simulation. The simulation result showed an overestimation of about 17% compared with the experimental one.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.4
• /
• pp.479-485
• /
• 2009

The acidolysis was performed to produce structured lipid with palm mid fraction (PMF) and stearic acid for 7, 24, and 36 hr at $70^{\circ}C$. The reaction was catalyzed by lipozyme TLIM (immobilized lipase from Thermonyces lanuginosa, amount of 10% and 20% by weight of total substrates) in the shaking water bath. The reaction conditions for maximum incorporation of stearic acid on the structured lipid were obtained when molar ratio of PMF and stearic acid was 1:2; concentration of lipozyme TLIM was 20wt%; reaction temperature was $70^{\circ}C$; and reaction time was 36 hr. After reaction under this condition, incorporation of stearic acid in the structured lipid was obtained up to 36.3% while the major components of triacylglycerol were 1,2-dipalmitoyl-3-stearoylglycerol (PPS, 28.19 area%), 1-palmitoyl-2-oleoyl-3-stearoylglycerol (POS/PSO, 20.70 area%) and 1-palmitoyl-2,3-distearoylglycerol (PSS, 18.13 area%). However, the fatty acid composition at the sn-2 position suggested that the positional specificity of lipozyme TLIM was not observed due to the acyl migration.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.878-879
• /
• 2007

This paper presents an optimum design of the electromagnetic pump with an tubular type linear induction motor(TLIM). For obtaining the maximum flow rate, the TLIM is optimized using genetic algorithm.

• Korean Journal of Food Science and Technology
• /
• v.42 no.2
• /
• pp.246-249
• /
• 2010

Diacylglycerol (DAG) was produced from lipase by the catalyzed synthesis of soybean oil (SBO) and glyceryl monooleate (GMO) with Lipozyme TLIM (Thermomyces lanuginosa). Effects of reaction time, molar ratio and enzyme road were studied. When 2:1, 1:1 and 1:2 (SBO:GMO) molar ratios with 20% Lipozyme TLIM were applied in a 1-hr reaction, the concentrations of DAG produced were 17.8, 20.0 and 20.4 g/100 g oil, respectively. Different amounts (2, 5, 10 and 20%) of Lipozyme TLIM were used at a 1:2 (SBO:GMO) molar ratio, and the concentrations of DAG produced in a 1-hr reaction were 10.8, 14.0, 16.9 and 20.4 g/100 g oil, respectively. During a 72-hr reaction, 10.8-22.7 g/100 g oil of DAG were produced under the reaction conditions in this study.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1329-1335
• /
• 2009

This paper presents the flow characteristics in the fluid circulation loop using the tubular type linear induction motor(TLIM) electromagnetic pump. A TLIM pump was designed using the equivalent and genetic algorithm for the flow system of 40[1/min]. The flow characteristics are analyzed by coupling the Maxwell equations with the Navier-Stokes equation. The analysis algorithm also takes account of the effects of the thrust. The flow characteristics are analysed with the proposed method and compared with the commercial program and experiment and discussed.