• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.355-358
• /
• 1998

Train control and monitoring system for the railway train requires a reliable real-time communication network. The system have various functions, diagnostics, passenger informations, and fault-tolerant controls. For this system, an international standard called TCN(Train Communication Network) is proposed by IEC and the train industries. The TCN is composed of two layers, wire train bus(WTB) and multifunction vehicle bus(MVB). This paper evaluates the performance of the proposed WTB and modified WTB. And computer simulations are performed. The evaluated results can be used for the fault tolerant network in the railway train system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1329-1331
• /
• 2003

This paper presents a Train Communication Network simulator (TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.88-97
• /
• 2023

Traffic flow prediction is of great significance in urban planning and traffic management. As the complexity of urban traffic increases, existing prediction methods still face challenges, especially for the fusion of spatiotemporal information and the capture of long-term dependencies. This study aims to use the fusion model of graph neural network to solve the spatio-temporal information fusion problem in traffic flow prediction. We propose a new deep learning model Spatio-Temporal Information Fusion using Graph Neural Networks (STFGNN). We use GCN module, TCN module and LSTM module alternately to carry out spatiotemporal information fusion. GCN and multi-core TCN capture the temporal and spatial dependencies of traffic flow respectively, and LSTM connects multiple fusion modules to carry out spatiotemporal information fusion. In the experimental evaluation of real traffic flow data, STFGNN showed better performance than other models.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.999-1000
• /
• 2008

• 대한핵의학회:학술대회논문집
• /
• 대한핵의학회 2000년도 2nd Korea-China Congress of Nuclear Medicine and 39th Annual Spring Meeting if the Korea SOciety Nuclear Medicine
• /
• pp.77.2-77.2
• /
• 2000

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1618-1628
• /
• 2011

The Train Diagnostic and Control System(TDCS) has been equipped on the modern Metro Vehicle, Locomotive and High Speed Train. The main purpose of this system is to support the identification of train status by real-time, the fast action against such failure events during revenue service and the fast convenient maintenance processes. Some of newest TCMS, a kind of control and monitoring system, has participated in the main control functions such as pantograph up and down, powering and braking command and so on. But these kind of control functions of the high speed train which has the operating speed over 300km/h are conducted by the train electrical logic circuits. The KTX-I and KTX-II - the local high speed train, are the typical example. The next generation TDCS for the ongoing project of distributed high speed train(HEMU) is designing with the target to increase main train control functions, to increase the reliability/avalibility and to increase the convenient driving. This paper introduces the overall configurations and functions of the new generation TDCS.

• 제어로봇시스템학회논문지
• /
• 제20권6호
• /
• pp.689-694
• /
• 2014

An SPLC (Safety Programmable Logic Controller) must be designed to meet the highest safety standards, IEEE 1E, and should guarantee a level of fault-tolerance and high-reliability that ensures complete error-free operation. In order to satisfy these criteria, I/O modules, communication modules, processor modules and bus modules of the SPLC have been configured in triple or dual modular redundancy. The redundant modules receive the same data to determine the final data by the voting logic. Currently, the processor of each rx module performs the voting by deciding on the final data. It is the intent of this paper to prove the improvement on the current system, and develop a voting system for multiple data on a system bus level. The new system bus protocol is implemented based on a TCN-MVB that is a deterministic network consisting of a master-slave structure. The test result shows that the suggested system is better than the present system in view of its high utilization and improved performance of data exchange and voting.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.204-209
• /
• 2003

Recently, The TCN(Train Communication Network} as the distributed control systems for electric vehicles, which is the international standard of the intra vehicle communication, actively recognizes variations and supports reconfiguration of the train network when a vehicle is separated or recombined. The technique of reconfiguration to take variety and interoperability of a vehicle constitution is used when the vehicle constitution is changed. At the time, each node making up vehicle network shares the information about the variation of vehicle constitutions and the state of nodes. In the hierarchical TCN structure, an exchange of data becomes available as a work to transmit information between components is performed at the node playing a role of gateway. This paper proposes a protocol to transmit the information of the train reconfiguration. The protocol gives an application to renew a list for transmitting information and to perform the transmission that can guarantee periodic and non-periodic data transmission between nodes when the network nodes changed by a variation of the network state are reconfigured. If use this protocol, can use functions that are offered in the electric railcar at the same time that composition of vehicles is completed without delay. And when driver of the electric railcar inspect before running of vehicles, can confirm state of vehicles visually through monitor in driver's room.

• Geomechanics and Engineering
• /
• 제32권2호
• /
• pp.179-191
• /
• 2023

To study the influences of tunneling on the earth pressure and ground settlement when the tunnel passes through the adjacent underground retaining structure, 30 two-dimensional model tests were carried out taking into account the ratios of tunnel excavation depth (H) to lateral width (w), excavation width (B), and excavation distance using a custom-made test device and an analogical soil. Tunnel crossing adjacent existing retaining structure (TCE) and tunnel crossing adjacent newly-built retaining structure (TCN) were simulated and the earth pressure variations and ground settlement distribution during excavation were analyzed. For TCE condition, the earth pressure increments, maximum ground settlement and the curvature of the ground settlement curve are negatively related to H/B, but positively related to H/s and H/w. For TCN condition, most trends are consistent with TCE except that the earth pressure increments and the curvature of ground settlement curve are negatively related to H/w. The maximum ground settlement is larger than that observed in tunnel crossing the existing underground structure. This study provides an assessment basis for the design and construction under confined space conditions.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권12호
• /
• pp.1580-1588
• /
• 1999

This paper evaluates the real-time performance of the Train Communication Network (TCN) that consists of WTB and MVB. A run-time scheduling algorithm for the hard-real time communication was proposed and its performance was evaluated. Also, a new addressing method and the adaptive tree algorithm were suggested to enhance performance. The overall performance was evaluated by computer simulation using Arena.