• Journal of Ocean Engineering and Technology
• /
• v.10 no.1
• /
• pp.53-64
• /
• 1996

In this paper, rotating bending fatigue tests have been carried out to investigate the growth behabiors of surface fatigue crack initiated from a small artificial surface defect, that might exist in real structures, on 2024-T3 and 6:4 brass. The test results are analysed in the viewpoints of both strength of materials and fracture mechanics, it can be concluded as follows. The effect of a small artificial surface defect upon the fatigue strength is very large. The sensitivity of 2024-T3 on the defect is higher than that of 6:4 brass. The growth behavior of the surface fatigue crack of 2024-T3 is different from that of 6:4 brass. The growth rate of the surface fatigue crack of 2024-T3 is considerably rapid in the early stage of the fatigue life and apt to decrease in the later stage. It was impossible to establish a unifying approach in the analysis of crack growth begabior of 2024-T3 and 6:4 brass using the maximum stress intensity factor because of their dependence on stress level. But if the elastic strain and cyclic total strain intensity factor range were applied to obtain the growth rate of surface fatigue cracks of the materials, the data were found to be nearly coincided.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.57-63
• /
• 2006

The purpose of this study is to correct data on 3 intersection ranging from Kwangchun INT. to Nongsung INT. by the means of VTR recording and site survey and to measure the responsiveness of performance index by diversifying the platoon dispersion factor in signal progression simulation. The results are as follows : 1. The value of platoon dispersion factor was 0.28-0.33. The value in up stream is lower than that of in down stream even on the same intersection. 2. The platoon index showed big changes, though performance index didn't according to platoon dispersion factor. Therefore the value of platoon dispersion factor which is inner variable in T7F can be fixed for 0.34. 3. There was only little divergence in performance index changes according to platoon dispersion factor in designing the progression or T7F model.

• The Journal of Information Systems
• /
• v.23 no.1
• /
• pp.161-184
• /
• 2014

Our study measures the Digital Life Index (DLI) of baby boomers by considering the utilization of digital devices in their everyday life. The study was conducted by implementing the following three-step approach: (1) development of survey questions and data collection; (2) build Digital Life Index (DLI) model and lastly; (3) empirical analysis using the Digital Life Index (DLI). In the first stage in order to develop the survey questions to measure the digital index, two surveys were conducted. For the first preliminary survey, it was done based on the existing literatures which enabled this investigation through FGI analysis involving real professionals. The second survey was conducted by commissioning a specialized external firm. In this survey, a total of 400 data was collected to verify the validity and objectivity of the data sample. The data gathered through the survey questions was used to develop the digital index. Firstly, the appropriate factors were extracted by conducting factor analysis. This factor analysis validates and verifies the factors which are appropriate in measuring Digital Life Index (DLI). The derived factors are broadly divided into five main factors. The first factor describes the possession, purchase and use of digital device (x1). Meanwhile, the second factor describes the digital device's software (x2) and the third factor describes the participation in utilizing digital device (x3). The fourth factor describes the utilization of digital device in human personal relationship (x4) and lastly, the fifth factor describes the effect of digital device in everyday life and work environment (x5). Secondly, the digital index model was developed. The variables to represent the Digital Life Index (DLI) are ${\chi}1t,{\chi}2t,{\chi}3t,{\chi}4t$ and ${\chi}5t$. Furthermore, as experience in using the digital index grows overtime, the growth can be represented by the "S" shape. Based on the results, Digital Life Index(DLI) is distributed with the highest point at 90.3 and the lowest point at 25.9.

• Nutrition Research and Practice
• /
• v.8 no.5
• /
• pp.516-520
• /
• 2014

BACKGROUND/OBJECTIVES: Carnosic acid (CA), found in rosemary (Rosemarinus officinalis) leaves, is known to exhibit anti-obesity and anti-inflammatory activities. However, whether its anti-inflammatory potency can contribute to the amelioration of obesity has not been elucidated. The aim of the current study was to investigate the effect of CA on Toll-like receptor 4 (TLR4) pathways in the presence of lipopolysaccharide (LPS) in 3T3-L1 adipocytes. MATERIALS/METHODS: 3T3-L1 adipocytes were treated with CA ($0-20{\mu}M$) for 1 h, followed by treatment with LPS for 30 min; mRNA expression of adipokines and protein expression of TLR4-related molecules were then measured. RESULTS: LPS-stimulated 3T3-L1 adipocytes showed elevated mRNA expression of tumor necrosis factor (TNF)-${\alpha}$, interleukin-6, and monocyte chemoattractant protein-1, and CA significantly inhibited the expression of these adipokine genes. LPS-induced up regulation of TLR4, myeloid differentiation factor 88, TNF receptor-associated factor 6, and nuclear factor-${\kappa}B$, as well as phosphorylated extracellular receptor-activated kinase were also suppressed by pre-treatment of 3T3-L1 adipocytes with CA. CONCLUSIONS: Results of this study suggest that CA directly inhibits TLR4-MyD88-dependent signaling pathways and decreases the inflammatory response in adipocytes.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.1 s.32
• /
• pp.27-37
• /
• 2007

Background and Objective : Psoriasis is a chronic skin disease characterized by angiogenesis. It has been reported that growth factor as vascular endothelial growth factor (VEGF) and insulin-like growth factor (IGF)-II are overexpressed in psoriatic epidermis. This stydy was carried out for whether SB extracts have an anti-angiogenic effect for angiogenic factor. Method : To investigate the inhibitory effect of VEGF expression by the SB extracts, we performed MTS assay, western blots using HaCaT cells. HaCaT cells were pretreated with SB extracts for 1 hour followed by treatment with IGF-II. Result : SB extracts significantly reduced IGF-II induced HIF-1 ${\alpha}$ protein level via p53 and MAPK pathway in HaCaT cells. Also, SB extracts inhibited IGF-II induced VEGF mRNA and protein expression levels in the HaCaT keratinocytes. Conclusion : These results suggest that inhibition of HIF-1 ${\alpha}$ and VEGF expressions by SB extracts contributes to the anti-angiogenic effects.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.2
• /
• pp.277-285
• /
• 2000

The purpose of this study was to quantify the relationship between the sense of touch and mechanical properties of man-made leather. The first was to develop the five conversion equations which convert mechanical properties of man-made leather into five factor scores, which express five factors of the sense of touch(surface property, stretchiness, thickness & weight, thermal property(warmth & coolness), and moisture property(sticky & clingy)). The second was to develop the conversion equation which converts five factor scores into score of the sense of touch. Five factor scores were predicted by the following mechanical properties; surface property factor by log2HB and (log2HB)2, stretchiness factor by logEM, thickness & weight factor by logT, log2HB, logW, thermal property factor by logT, logHB, logSMd, and moisture property factor by logMMD, RC, RC2, (logEM)2, RT2. Subsequently, these five factor scores were converted into score of the sense of touch. The predictive abilities of the developed equations were satisfied.

• Journal of Environmental Health Sciences
• /
• v.15 no.2
• /
• pp.51-58
• /
• 1989

In order to estimate unit loading factors of N, and P for controlling eutrophication of Youngsan lake. This study was performed in 4 kinds of pollutant sources from domestic sewage, industrial waste water, livestock stall waste water and drainage of agricultural area during the period from april to october 1988. These results were as follows: 1. The sewage flow for domestic waste water was 191.2 l/capita, day and that of the gray and toilet waste water among the domestic waste water were shown 152.9 l/capita, day(80%) and 38.3 l/capita, day(20%), respectively. 2. The unit loading factor total nitrogen(T-N) for domestic waste water was 7.582g/capita, day, and that of the gray and toilet waste water among the domestic waste water were 1.826g/ capita, day(24.1%) and 5.756g/capita, day(75.9%), respectively. The other hand, the unit loading factors of total phosphorus(T-P) for domestic waste water was 0.925g/capita, day, and that of gray and toilet waste water among the domestic waste water were 0.470g/capita, day(50.8%) and 0.455g/capita, day(49.2%), respectively. 3. In offering Price per million won, the T-P loading factor for drinking manufacture, confectionery manufacture, beer-manufacture and fibre manufacture in the industrial pollutant sources estimate to be 0.350g/day, 0.099g/day, 32.351g/day and 1.536g/day, while T-N loading factor about them in the industrial pollutant sources estimate to be 4.117g/day, 2.414g/day, 106.726g/day and 60.504g/day, respectively. 4. The T-P loading factor according to wash-water of milch cow and pig were 6.735g/day and 18.526g/day, in case of T-N they were 42.397g/day and 27.226g/day, respectively. 5. The T-P loading factor for pollutants drainage in the Paddy fields, fields and forests area were 0.082g/are, day, 0.014g/are, day and 0.002g/are, day, and the T-N loading factor were 0.309g/are, day, 0.158g/are, day and 0.064g/are, day, respectively. The diffrent of the loading factor for pollutants discharges in the agricultural area were resulted from the rainful intensity, the rainful, the amount of fertilization manure, and etc.

• Korean Journal of Agricultural Science
• /
• v.47 no.1
• /
• pp.131-138
• /
• 2020

The aim of this study was to evaluate the effect of aflatoxin B₁ (AFB₁) on in vitro rumen fermentation at various dose levels of 0 (T₁), 100 (T₂), 200 (T₃), and 300 (T₄) ppb in a wheat straw-based buffalo diet. The results show that the truly degradable dry matter, truly degradable organic matter, gas production, microbial biomass production and partitioning factor values in the control group (T₁) were higher (p < 0.05) than those of the T₂, T₃, and T₄ groups. The total volatile fatty acids, acetate, propionate, and butyrate values in the control group (T₁) were higher (p < 0.05) than those of the T₂, T₃, and T₄ groups. The partitioning factor value in the control group (T₁) was higher (p < 0.05) than those of the T₂, T₃, and T₄ groups. The partitioning factor values of the T₂ and T₃ groups were higher (p < 0.05) than that of the T₄ group. There was no significant variation in the partitioning factor value between the T₂ and T₃ group. The acetate : propionate (A : P) ratio in the control group (T₁) was lower (p < 0.05) than those of the T₂, T₃, and T₄ groups. The A : P ratio in the T₂ group was lower (p < 0.05) than those of the T₃ and T₄ groups. It was concluded that different levels of AFB₁ contamination in feed significantly affect the in vitro rumen fermentation characteristics. Thus, these findings could help to determine the influences of AFB₁ in a wheat straw-based buffalo diet. Additionally, it is necessary to manage AFB₁ contamination in ruminants.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.141-146
• /
• 2012

Aluminum alloys have been used with various thicknesses suitable for light weight of structure. It is known that the thickness effect of material is an important factor affecting fatigue crack propagation under constant fatigue stress condition. In this work, we presented the behavior of fatigue crack propagation in thin plate compared to thick plate Al 2024-T3 alloy with referred thickness effect in a correlative equation determined by the shape factor and the loading factor. We chose two factors that are used in the correlative equation with considering that the experiments were carried out under a constant fatigue stress condition. The thickness ratio of thin plate compared to thick plate and the equivalent effective stress intensity factor ratio depending on thickness were chosen as shape and loading factors. A correlative equation is utilized to determine the equivalent effective stress intensity factor range of thin plate and identify the degree of increasing phenomenon of fatigue life in thin plate compared to thick plate.

• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.84-93
• /
• 2012

The study was conducted to analyze the spatio-temporal changes in water quality of the major 36 sampling stations of Nakdong River, depending on each station, season using the 17 water quality variables from 2000 to 2010. The result was verified to interpret the characteristics of water quality variables in a more accurate manners. According to the Principal component analysis (PCA) and Exploratory factor analysis (EFA) results; the results of these analyses were identified 4 factors, Factor 1 (nutrients) included the concentrations of T-N, T-P, $NO_{3}-N$, $PO_{4}-P$, DTN, DTP for sampling station and season, Factor 2 (organic pollutants) included the concentrations of BOD, COD, Chl-a, Factor 3 (microbes) included the concentrations of F.Coli, T.Coli, and Factor 4 (others) included the concentrations of pH, DO. The results of a Cluster analysis indicated that Geumhogang 6 was the most contaminated site, while tributaries and most of the down stream sites of Nakdong River were mainly affected by each nutrients (Factor 1) and organic pollutants (Factor 2). The verification consequence of Confirmatory factor analysis (CFA) from Exploratory factor analysis (EFA) result can be summarized as follows: we could find additional relations between variables besides the structure from EFA, which we obtained through the second-order final modeling adopted in CFA. Nutrients had the biggest impact on water pollution for each sampling station and season. In particular, It was analyzed that P-series pollutant should be controlled during spring and winter and N-series pollutant should be controlled during summer and fall.