• 설비공학논문집
• /
• 제18권1호
• /
• pp.31-37
• /
• 2006

The present study has been experimentally investigated the effect of geometric and operating parameters on the two-phase flow distribution of refrigerants in a horizontal T-junction. The operating parameters were the kind of refrigerants (R-22, R- l34a, and R-410A), saturated temperature, and the inlet mass flux and quality. The geometric parameters were the tube diameter and the tube diameter ratio. The measured data of refrigerants were compared with the values predicted using the models developed by several researchers for air/water or steani/water two-phase flow. Among the operating parameters, the inlet Quality was the most sensitive to the mass flow rate ratio. Between the geometric parameters, the tube diameter ratio was more sensitive than tube diameter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.177-178
• /
• 2014

본 논문에서는 기존에 널리 사용되고 있는 3상 인버터와 태양광 인버터 및 무정전 전원공급시스템의 고효율화를 위해 최근 적용이 확대되고 있는 3상 T형 3-레벨 인버터에서 각 전력 반도체에서 발생하는 손실을 구하고 그 결과를 비교, 분석하였다. 또한 그 손실 특성을 기초로 해서 3상 50kVA급 기존 3상 인버터 및 3상 T형 3-레벨 인버터 전력변환모듈을 설계하였고 전산유체해석 소프트웨어를 이용해서 전력변환모듈 내부 방열판의 상세 온도 분포를 해석하고 그 비교 분석 결과를 제시하였다.

• 한국지반공학회지:지반
• /
• 제4권2호
• /
• pp.15-24
• /
• 1988

확정론적 방법으로 안정조건을 만족하는 T형옹벽을 대상으로 지지력, 활동, 전도의 단일파괴류 형에 대해 설계변수를 통계적 독립이고 정규분포로 가정하여 AFOSM 방법으로 신뢰도 해석을하였다. 이를 바탕으로 각 파양모드 사이의 상관성을 고려한 구조물 전체적인 신뢰도는 신뢰지수로 2.05 이었다. 그러므로, 확정론적 설계법에 의해 안전상태로 판단된다 할지라도 신뢰도개념으로는 일반적인 목표신뢰지수(Target reliability index) 3보다 훨씬 낮기 때문에 안정상태로 판단하기는 곤란하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.223-228
• /
• 1994

A new velocity formulation technique, which contains the advantage of UBET and the shape function of FEM, is proposed. In the proposed technique, a shape function is used to improve the unreasonableness of elemental partition and to solve the difficulty of velocity-field determination. In order to verify the effectiveness of this rechnique, T-shaped forging processes are simulated. The results are compared with these obtained by experimental measurements in T-shaped forging. In T-shaped forging, good agreements between theory and experiment are also confined.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1424-1428
• /
• 2004

본 연구는 유량증가에 따른 T형 취수펌프장내의 흐름상황변화를 수리 및 수치모형실험을 통하여 규명하였다. 수리모형은 1:20의 축척으로 제작되었고 수치모형은 RMA-2를 사용하였다. 수리모형실험은 취수펌프장내의 3차원 흐름현상을 살펴보기에 적절한 것으로 나타났다. 2차원 수치모형은 3차원 흐름현상을 토의하기에는 어려운 점이 있겠지만 경제적으로 여러 가지 상황에 대한 모형실험을 할 수 있는 장점을 이용하기 위하여 취수펌프장내 5D지점에서의 최대유속과 와도, 펌프 장내 최대유속, 냉각수취수로내의 최대유속을 2개의 취수로 공급유량에 대하여 비교하였다.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.56-65
• /
• 1998

The bonding strength evaluation of the light weight materials for an electrical vehicle has been performed through the T-peel joint test in which the design paramete- rs such as joint style, adherend type, adherend thickness, adhesive thickness, and adhesive type are considered. It is experimentally observed that the peel strength of joint increases with the increase of the adherend thickness. With the increase of the adhesive thickness, however, the peel strength of joint increases a little. Aluminum-FRP adherend combination shows such higher peel strength than that of Aluminum-Aluminum adherend combination. For the adhesive bonded joint, the results of FEM analysis agree with those of experiment. The adhesive bonded joint reinfored with a rivet gives higher peel strength than that of the joint without rivet.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.67-74
• /
• 2001

In domestic, irregular walls such as T, L, H and Box shapes are considered as rectangular wall in the design of bearing wall apartment building. The strengths of walls, therefore, can be underestimated in case of using the current design process. Irregular walls are connected to each other as rigid joint so that part of the load can be resisted by the wall perpendicular to the load direction. This resistance can be caused by the effective width of perpendicular wall. This additional resistance by the perpendicular wall increases the strength of structural walls. The objective of this study is to evaluate the effective widths of flanged walls with different aspect ratios by using FEM analyses. the results from finite element method are compared with effective flange widths of some code provisions.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.521-526
• /
• 2002

The seismic performance of structural walls subjected to the cyclic lateral loads are influenced by various factors, like sectional shape, aspect ratio, reinforcement ratio, arrangement of reinforcement, and axial load ratio etc. In this research, reinforced concrete structural walls with the T-shaped cross section were selected. The seismic performance of T-shaped wall was affected by the many (actors because T-shaped wall is irregular wall composed to two rectangular walls. Especially the seismic performance of T-shaped wall varies with the flange condition and the various factors including the flange condition were determined. Therefore, the objective of this study is to understand the factors to improve seismic performance of RC T-shaded tv using sectional analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.893-895
• /
• 2013

본 논문에서는 접지면에 역 T형 노치를 넣은 평면형 폴디드 모노폴 안테나를 제안하였다. 제안된 안테나에서는 대역폭을 늘리기 위하여 내부 패치와 외부 패치의 폭들을 점차 넓히는 방향으로 변화를 주었고, 그라운드에 가로와 세로 slit의 길이가 비슷하고 폭은 약 2배 정도 차이가 있는 노치를 넣어 설계 및 모의실험을 하였다.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.166-173
• /
• 1998

The evaluation of joint fatigue strength of light weight materials for an electrical vehicle body has been performed through T-peel joint tests with the design parameters such as joint style, adherend type, adherend thickness, adhesive thickness, and various adhesives. Fatigue strength was evaluated through 5-Hz, tension-tension, load controlled test with the zero stress ratio. It was observed that the fatigue strength of the joint increases with the increase of the adherend thickness. With the increase of the adhesive thickness, however, the fatigue strength of the joint increases insignificantly. An aluminum-FRP adherend combination shows much higher fatigue strength than an aluminum-aluminum adherend combination. The results of fatigue tests were found to be consistent with those of static tests.