• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.262-268
• /
• 2002

Statement of problem. In-Ceram system is one of the all-ceramic crowns that can be used in anterior 3 unit fixed partial dentures and posterior single crowns. The alumina core used in In-Ceram system is manufactured using slip-casting technique. The slip-casting technique is difficult and technique sensitive. To improve this problem, tape-casting method was introduced into dentistry. There were no studies to examine the effect of margin design on the margin fitness of all-ceramic crowns fabricated from alumina tape. Purpose. The purpose of this study was to compare the marginal fitness of glass infiltrated alumina core fabricated from aqueous-based alumina tape according to different margin types ($90^{\circ},\;110^{\circ},\;135^{\circ}$ shoulder margin). Material and method. Three upper central resin incisors were prepared with $90^{\circ},\;110^{\circ}$, and $135^{\circ}$ shoulder margins for all-ceramic crowns, respectively. The resin teeth were duplicated and master die and special plaster die were made as usual. After alumina cores were fabricated from aqueous-based alumina tape, cores were cemented to each 15 epoxy dies replicated from three resin teeth with resin cement. These cemented cores were embedded in epoxy resin. Specimens were cut mesiodistally and buccolingually. Marginal gap and discrepancy were measured under microscope. Results. The marginal gap and discrepancy of $90^{\circ}$ marginal angle was $75.1{\mu}m,\;86.6{\mu}m,\;110^{\circ}$ marginal angle was $41.5{\mu}m,\;50.7{\mu}m$ and $135^{\circ}$ marginal angle was $51.7{\mu}m,\;54.2{\mu}m$, respectively. The smallest value was seen in 110 (angle, which was statistically significant compared to that of $90^{\circ}$ angle (p<0.05). Conclusion. Marginal fitness of alumina cores made of alumina tape with $110^{\circ}$ shoulder margin was best and others were clinically acceptable.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.145-152
• /
• 1998

This paper presents an optimum design of a rotor-bearing spindle system for a ultra centrifuge (80,000 RPM) supported by ball bearings with nonlinear stiffness characteristics. To obtain the nonlinear bearing stiffnesses, a ball bearing is modeled in five degrees of freedom and is analyzed quasi-statically. The dynamic behaviors of the nonlinear rotor-bearing system are analyzed by using a transfer-matrix method iteratively. For optimization. we use the cost function that simultaneously minimizes the weight of a rotor and maximizes the separation margins to yield the critical speeds as far from the operating speed as possible. Augmented Lagrange Multiplier (ALM) method is employed for the nonlinear optimization problem. The result shows that the rotor-bearing spindle system is optimized to obtain 9.5％ weight reduction and 21％ separation margin.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.11a
• /
• pp.15-18
• /
• 2001

In this paper, we investigate the rotordynamic characteristics of turbopump system for 9.5ton thrust liquid rocket engine. A finite element method is used to analyze the vibratior characteristics of a rotor-bearing system. The turbopump rotating system is modeled by shaft with sixty elements, nine rigid disks, four ball bearings and four floating ring seals. The calculation results show that the margin of 1st critical speed is increased from 12% to 68% by use of elastic damping ring. In addition, the margin of the 2nd critical speed near the operating speed is increased from 30% to 63% by the stiffness and damping of floating ring seals.

• Journal of Technologic Dentistry
• /
• v.42 no.1
• /
• pp.45-53
• /
• 2020

Purpose: The purpose of this study was to investigate the current status and satisfaction of dental CAD/CAM system. Methods: A survey of dental technicians was conducted and a total of 353 responses were used for analysis. The satisfaction difference according to career was analyzed by ANOVA and tukey HSD (α = .05). Results: Satisfaction with the design program was 3.64 ± .86, the highest among all items. On the other hand, the satisfaction with price was 2.75 ± 1.02, which was the lowest. The difference according to career was statistically significant in the following items. Frequent breakdown, single crown margin, bridge crown margin, retentivity, price, A/S, equipment training (p<.05). Conclusion: As the materials applied to dental CAD/CAM are expanding and the types of prostheses are diversified, the use rate of CAD/CAM is continuously increasing. The dental CAD/CAM system will need to be improved in a way that will satisfy all patients, dentists and dental technicians.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2001

For a parametric uncertain system, there are many results on stability analysis, but only a few synthesis methods. In this paper, we proposed a new target polynomial decision method for the parametric uncertain system to stabilize the closed loop system with maximal parametric $l_2$ stability margin. To this, we used both Lipatov Theorem and coefficient diagram method(CDM). To show the effectiveness of the proposed method, we designed a robust controller for the inverted pendulum system with parametric uncertainties using fixed order pole assignment(FOPA) method and its performance was compared with that of the ${\mu}$ synthesis methods.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.651-656
• /
• 1991

A mixed $H_2/H{\infty}$ design methodology is proposed for a single-input-single-output system. The reciprocal stability margin(RSM) function is defined for the perturbed plant with additive uncertainties. A suboptimal $H_2$ controller is sought to minimize the RSM function.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.167-169
• /
• 2005

This paper proposes an optimum tuning which improves the tuning effect of IMC-PID and guarantees the performance and robustness of controller system by considering gain margin, phase margin, sensitivity functions and integral square error(ISE) for IMC-PID controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.362-366
• /
• 1986

Using simple linear prediction algorithm a design procedure of robust PI and PID controllers for SISO system, usually called 'PID predictor controllers, is developed. The design procedure is able to properly adjust gain margin and phase margin and control coefficients are selected in frequency domain. The performance of the PID predictor controller is superior to that of the normal PID controller in terms of robustness in design and disturbance rejection.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.213-215
• /
• 1999

This paper presents a transmission cost allocation through application of a new reliability index in transmission pricing in competitive electric industry. The proposed method allocates a fair use of transmission system charge given separately to individual generator by capacity usage, based on the contribution of individual generator considering N-1 contingency in reliability margin of transmission capacity, and offers more alternatives of pricing in using transmission capacity and transmission margin.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.344-347
• /
• 2006

This paper proposes an optimum tuning which improves the tuning effect of IMC-PID and guarantees the performance and robustness of controller system by considering gain margin, phase margin, sensitivity functions and integral square error(ISE) for IMC-PID controller.