• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 추계학술발표논문집(상)
• /
• pp.279-282
• /
• 2004

In this paper, we present the methodology of performance testing for web based university resource planning systems. The methodology contains an adequate procedure and workload assessment method. We execute real performance testing to the university resource system during system test stage. To verify the adequacy of the methodology, We compare the result between testing system's hardware utilization and operating system's. The result is nearly the same. Empirical experiments are also shown.

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1263-1270
• /
• 2000

The operation frequency of High-speed Communication System becomes very fast with the advanced technology of VLSI chips and system implementation. There may exist various types of noise sources degrading the signal integrity in this system. The present main system is made of backplane, so faults can be brought whenever a board is removed, replaced or added. This backplane boards testing is a very important process to verify the operation of system. firstly, we model the effects of the internal noises in the High-speed Communication System to the signal line and propose a new design method to minimize these effects. For the design methodology, we derive the characterization value for each mode land them construct the optimal simulation model. We compare the result of own proposing method with that fo the existing methods, through simulation and show that the quality of High-speed Communication System is significantly enhanced. Secondary our proposing BIST for the Backplane Boards Testing is designed to guarantee that there is no fault in the high-speed communication system.

• 항공우주시스템공학회지
• /
• 제9권3호
• /
• pp.8-11
• /
• 2015

Since the late 1990's, FAA, NASA and the aerospace industry have worked together to develop the sharing system of the composite material qualification databases which were obtained through the standardized fabrication and testing procedures. The result was what is now known as the AGATE(Advanced General Aviation Transport Experiments) or NCAMP(National Center for Advanced Materials Performance) methodology, a more cost-effective concept that shifts the major responsibility for qualification and testing from the aircraft manufacturer to the material supplier. The properties of composite materials are largely dependent on the testing as well as the raw material properties and the manufacturing process including the process control parameters. Thus it is important in the composite material qualification to comply with the standardized testing procedures. In this paper, I will describe the standardized witness methodologies of certification engineers to reduce the effect of testing variability within the qualification data.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.138-142
• /
• 2015

Most of the existing studies on functional safety testing for the railway signaling system software have focused on verifying the functional safety through the monitoring of internal memory embedded railway signaling system. However, the railway signaling system is one of the typical embedded control system in the railway sector, and the embedded software has a characteristic of generating an appropriate outputs through the combination of internal processing in consideration of the current internal status and external input. Therefore, the test approach of using the interface communication channel can be effective way for the functional testing for railway signaling system software in consideration of these characteristic. Since a communication interface specification of the railway signal system has a the properties of the sequence input and output signals, test-case for software testing is the most effective methodology by MSC (Message Sequence Chart) language, one of the graphic language. The MSC-based test-case generating methodology for signaling system software was proposed in this paper.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권4호
• /
• pp.394-402
• /
• 2004

둘 혹은 그 이상의 개체가 협력하거나 통신할 때와 같이 상호 작용할 때 그 상호작용의 올바른 정도를 상호운영성이라고 한다. 소프트웨어에서 상호운영성시험의 필요성은 복수의 소프트웨어 개체를 사용하여 주어진 기능 혹은 임무를 수행하는 시스템을 구축할 때 발생한다. 오늘날 소프트웨어가 더욱더 복잡한 문제를 해결하기 위하여 이용되고 소프트웨어시스템이 네트워크를 통하여 그 기능이 분산되어 더 풍부한 서비스를 제공하게 됨에 따라 상호운영성시험의 중요성은 더욱 더 커지고 있다. 이 논문은 상호운영과 상호운영성시험에 대한 근본적인 개념과 원리를 논의하고, 실제 상호운영성시험을 수행하기 위한 접근방법을 논의함으로써 상호운영성시험을 위한 체계와 방법론을 제공한다.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.5802-5809
• /
• 2015

철도신호시스템은 열차의 운행을 책임지는 바이탈한 제어장치로서, 실제 사용 전에 충분한 시험을 통해 그 기능 안전성이 검증되어야 한다. 지금까지는 대부분 실험실에서 시뮬레이터에 의한 개발한 철도신호시스템의 검증을 수행 후 철도현장에 설치하여 다른 장치와 운용성 테스팅 단계를 거치게 된다. 이러한 접근방법은 일부 제한된 범위에서 상호운용성이 검증되고 있어, 보다 체계적인 상호 운용성 검증이 요구되고 있다. 본 논문에서는 철도신호시스템의 상호운용성 검증을 위한 단계를 3단계로 제시하고, 각 단계별 검증 방법을 설명한다. 또한 최종단계인 3단계에 적용을 위한 시험방법 및 테스팅 도구를 제안하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.103.2-103
• /
• 2001

• Earthquakes and Structures
• /
• 제10권4호
• /
• pp.735-755
• /
• 2016

This article presents a proposed analytical methodology to determine seismic force-resisting system R-values for steel diagrid framed systems. As current model building codes do not explicitly address the seismic design performance factors for this new and emerging structural system, the purpose of this study is to provide a sound and reliable basis for defining such seismic design parameters. An approach and methodology for the reliable determination of seismic performance factors for use in the design of steel diagrid framed structural systems is proposed. The recommended methodology is based on current state-of-the-art and state-of-the practice methods including structural nonlinear dynamic analysis techniques, testing data requirements, building code design procedures and earthquake ground motion characterization. In determining appropriate seismic performance factors (R, ${\Omega}_O$, $C_d$) for new archetypical building structural systems, the methodology defines acceptably low values of probability against collapse under maximum considered earthquake ground shaking.

• 한국항행학회논문지
• /
• 제22권6호
• /
• pp.530-536
• /
• 2018

최근 무인항공기 드론의 활용범위와 수요가 지속적으로 증가함에 따라 무인항공기와 유인항공기 간 공역을 통합하여 운용하는 연구가 전 세계적으로 활발하게 진행되고 있다. 공역 통합을 위해서는 유인항공기에 준한 기술기준 및 인증 제도 수립이 필수적이며, 이에 따른 시험평가 방안이 제시되어야 한다. 본 논문에서는 향후 무인항공기 항법 시스템에 대한 기술기준이 수립되었을 경우, 기술기준 적합성 검증을 위한 시험방법을 제시하였다. 연구를 위해 무인항공기 임무 프로파일 및 운용환경 분석, 시험항목 도출, 시험방법 수립, 시뮬레이션 및 무인항공기를 통한 실증을 수행하였다. 시험방법으로 정적시험, 트랙이동시험, 경로비행시험이 도출되었으며, 각 시험수행 결과 시험대상 무인항공기의 항법시스템 오차는 전체 비행단계에서 95% 신뢰수준에서 약 1.4m의 위치정확도를 보임을 확인하였다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2005년도 GIS/RS 공동 춘계학술대회
• /
• pp.125-139
• /
• 2005

It is assumed that GIS conformance certification can be important for improving geospatial interoperability. This study aims to establish the framework, methodology and model for GIS conformance testing and certification Also, as an implementation example, a pilot conformance testing for GIS metadata standard are examined.