DOI QR코드

DOI QR Code

Interoperability Test and Testing Tool for Railway Signaling System

철도신호시스템 상호운용성 검증 방법 및 지원도구의 개발

  • Hwang, Jong-Gyu (Railroad Safety Certification Center, Korea Railroad Research Institute) ;
  • Jo, Hyun-Jeong (Railroad Safety Certification Center, Korea Railroad Research Institute) ;
  • Baek, Jong-Hyun (Metropolitan Transportation Research Center, Korea Railroad Research Institute)
  • 황종규 (한국철도기술연구원 철도안전인증센터) ;
  • 조현정 (한국철도기술연구원 철도안전인증센터) ;
  • 백종현 (한국철도기술연구원 광역도시철도연구센터)
  • Received : 2015.05.26
  • Accepted : 2015.09.11
  • Published : 2015.09.30

Abstract

Railway signaling system is the vital control system in charge of the core for safely train operation, its functional safety must be checked through sufficient verification. Until now, to verify the interoperability of developed railway signaling system, the on-site testing approaches have been applied after testing in laboratory with simulator. This approaches are some limited range of interoperable verification, so more systematic verification interoperability is required. In this paper, the three phases of interoperability verification for railway signaling system was proposed, and methodology for each phases are represented. And also The interoperability validation methodology and supported testing tool for railway signaling system is represented in this paper

철도신호시스템은 열차의 운행을 책임지는 바이탈한 제어장치로서, 실제 사용 전에 충분한 시험을 통해 그 기능 안전성이 검증되어야 한다. 지금까지는 대부분 실험실에서 시뮬레이터에 의한 개발한 철도신호시스템의 검증을 수행 후 철도현장에 설치하여 다른 장치와 운용성 테스팅 단계를 거치게 된다. 이러한 접근방법은 일부 제한된 범위에서 상호운용성이 검증되고 있어, 보다 체계적인 상호 운용성 검증이 요구되고 있다. 본 논문에서는 철도신호시스템의 상호운용성 검증을 위한 단계를 3단계로 제시하고, 각 단계별 검증 방법을 설명한다. 또한 최종단계인 3단계에 적용을 위한 시험방법 및 테스팅 도구를 제안하였다.

Keywords

References

  1. Korea Railroad Research Institute, "Development of safety assessment technology for railway signaling system", MOCT R&D research report, June 2011.
  2. Korea Railroad Research Institute, "Development of technology for safety and efficiency improvement of train operation", KRRI research report, Dec. 2014.
  3. J.D. Lawrence, "Software qualification in safety applications", Reliability Engineering & System Safety, Vol. 70, No. 2., pp. 167-184, 2000. DOI: http://dx.doi.org/10.1016/S0951-8320(00)00055-7
  4. Kyu-Don Shin and Jong-Woo Lee, "Software Quality Assurance Activities of Automatic Train Control System to meet Requirements of the IEC 62279 Standard", Journal of Korean Society for Railway, Vol. 13, No. 4, pp. 412-418, 2010.
  5. Eui-Jin Jeong and Kyeong-Ho Shin, "Suggestion of Development and Assessment Procedure for Railway Software", The Proceedings of KSR Spring Conference, pp.376-381, 2008.
  6. J. Bang, R. Ha, "Validation test codes development of static analysis tool for secure software", Journal of KICS, Vol. 38C, No. 05, pp.420-427, May. 2013. https://doi.org/10.7840/kics.2013.38C.5.420
  7. H. J. Jo, et al, "Analysis of S/W Test Coverage Automated Tool &Standard in Railway System", Journal of KAIS, Vol. 11, No. 11, pp.4460-4467, 2011. DOI: http://dx.doi.org/10.5762/KAIS.2010.11.11.4460
  8. M. Khan, "Different approaches to white box testing technique for finding errors", Int'l Journal of Software Engineering and Its Applications", Vol.5, No.3, July, 2011.
  9. K. M. Choi, Y. H. Kim and K. I. Woo, "Improvement Method of software reliability assurance for military systems", National Defense and Technology, Vol. 404, pp.81-89, 2012.10.
  10. Debra S. Herrmann, " Software Safety and Reliability : Techniques, Approached, and Standards of Key Industrial Sectors", Wiley-IEEE Computer Society Press, pp.21-25. Jan. 2000.
  11. K. I. Woo and S. J. Woo, "The state of the art of international standard for reliability software", Journal of Korea information science society, Vol.30, No.2, pp.72-81, 2012.2
  12. Seong-Won Kang, Jae-whui Shin, Jong-Jin Seong, Gyeong-Pyo Hong, "Software interoperability test system and methodology", Journal of the Korea Information Science Society, Vol. 31, No. 4, 2004.
  13. J.G. Hwang, J.H.Baek, and H.J.Jo, "Interoperability test methodology for train control system using interface channels", CMEM 2015 international conference proceeding, May. 2015. DOI: http://dx.doi.org/10.2495/cmem150471
  14. KRS SG 0062-06, Railway Signaling System(Pointto-point based Protocol)", 2006.6
  15. KRS SG 0063-06, "Railway Signaling System(Network based Protocol)", 2006.6
  16. J.G. Hwang, H.I.Jo and J.H. Lee, "Development of communication protocol verification tool for vital railway signaling systems". Journal of Electrical Engineering & Technology, Vol. 1, No.4, pp.513-519, 2006. DOI: http://dx.doi.org/10.5370/JEET.2006.1.4.513
  17. J.G. Hwang, et al, "Black-box testing tool of railway signaling system software with focus on user convenience", Int'l conference proceeding of Urban Transit 2014, July 2014.
  18. J.G. Hwang, et al, "Architecture of software testing tool for railway signaling through actual use interface channel", The Journal of Korea Information and Communication Society, Vol.39A, No.9, pp.880-886, 2014. DOI: http://dx.doi.org/10.7840/kics.2014.39C.9.880
  19. International Standard, "IEC 62279 : Railway Applications - Software for Railway Control and Protection Systems", 2002.
  20. International Standard, "IEC 61508 : Functional Safety of Electrical / Electronic / Programmable Electronic Safety-Related Systems", 1999.
  21. Ministry of Land, Infrastructure and Transport, "Technical guideline for railway infrastructure and facilities", MLIT2013-839, 2014.3.
  22. ITU-T Recommendations X.29 Series, "Conformance testing methodology and frame work", 1997.
  23. J. G. Hwang, J. W. Lee and Y. J. Park, "Integrated Railway Signaling Systems for Laboratory Testing of Next-generation High-speed Train", Journal of Korean Institute od Electrical and Electrical Engineering, Vol 53P, No. 1, pp. 32-39, 2004.
  24. Colin Willcock, "An introduction to TTCN-3, 2nd Edition", Wiley, 2011. DOI: http://dx.doi.org/10.1002/9780470977903
  25. http://www.ttcn-3.org/index.php/downloads/standards