• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.344-347
• /
• 2006

China Coastal Water (CCW) usually appears in the seas surrounding Jeju Island annually (June?October) and is very pronounced in August. The power spectrum density (PSD), sea level anomalies (SLAs), and sea surface temperatures (SSTs) were found to peak annually and semiannually. The peaks at intervals of 80-, 60-, and 43-days are considered to be influenced by CCW and the Kuroshio Current. Generally, low-salinity water appears to the west of Jeju Island from June through October and gradually propagates to the east, where CCW meets the Tsushima Current. Empirical orthogonal function (EOF) analysis of SLAs and SSTs indicated that the variance in SLAs and SSTs was 55.70 and 98.09% in the first mode, respectively. The PSD for the first mode of EOF analysis of SLAs was stronger in the western than in the eastern waters because of the influence of CCW. The PSD for the EOF analysis of SSTs was similar in all areas (the Yangtze Estuary and the waters to the west and east of Jeju Island), with a period of approximately 260 days.

• The korean journal of orthodontics
• /
• v.11 no.2
• /
• pp.135-142
• /
• 1981

This study was performed to observe the gross reactions of surrounding maxillary sutures to the widening of midpalatal suture in the dog. Three healthy dog were chosen for the experiment. One animal was used as control, and two were used as experimental animals. Midpalatal suture was expanded total 7mm with screw for 10 days. The following results were obtained : 1. Midpalatal suture was expanded with the most width, in which anterior was be more expanded than the posterior, and shape was wedge form. 2. Interincisive suture was definitely expanded. 3. Internasal suture and interfrontal suture were slightly expanded. 4. Expansion of frontomaxillary suture, frontoparietal suture, frontonasal suture, zygomatico temporal suture, zygomatico frontal suture, zygomatico maxillary suture, occipito mastoid suture, occipito parietal suture, naso incisive suture, naso maxillary suture, and incisive maxillary suture were not observed.

• Corrosion Science and Technology
• /
• v.16 no.5
• /
• pp.227-234
• /
• 2017

Reference electrodes are generally implemented for the purpose of monitoring the cathodic protection potentials of buried or immersed metallic structures. In the market, many types of reference electrodes are available for this purpose, such as saturated calomel, silver/silver chloride and copper/copper sulfate. These electrodes contain a porous ceramic junction plate situated in the cylindrical body bottom to permit ionic flux between the internal electrolyte (of the reference electrode) and the external electrolyte. In this work, the copper/copper sulfate reference electrode was modified by replacing the porous ceramic junction plate for a metallic platinum wire. The main purpose of this modification was to avoid the ion copper transport from coming from the inner reference electrode solution into the surrounding electrolyte, and to mitigate the copper plating on the coupon surfaces. Lab tests were performed in order to compare the performance of the two mentioned reference electrodes. We verified that the experimental errors associated with the measurements conducted with developed reference electrode would be negligible, as the platinum surface area exposed to the surrounding electrolyte and/or to the reference electrolyte are maintained as small as possible.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.167-172
• /
• 2009

The purpose of this study is examine the characteristics of public open space in the office buildings located in urban commercial strip, in terms of its relationships to street, to building, and to order surrounding facilities. Theoretical basis of this research is that public outdoor spaces are to be the intermediate territory set between streets and a buildings. 5 commercial buildings in Seoul are selected as sample cases and they were closely analyzed in a comparative manner. Based on this comparison, several planning guidelines are suggested for the activation of the space, mainly in terms of the location of public open space in relation to street, the design techniques and devises reflecting the purpose of the space, and territorial arrangement and furniture layout, and the patterns of relationship to surrounding space and facilities.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.3
• /
• pp.194-200
• /
• 2009

Suspension of a single solid particle in a channel flow with a constant pressure gradient is studied numerically. The interaction of a circular particle with a surrounding Newtonian fluid is formulated using a combined formulation. Numerical results are presented using two dimensionless variables: the sedimentation Reynolds number and the generalized Froude number. From the present results, it has been shown that a solid particle is suspended at a smaller generalized Froude number as the viscosity of the surrounding fluid increases. The time taken for equilibrium position is found to be smaller as fluid viscosity increases when both : the sedimentation Reynolds number and the generalized Froude number are the same while, at the same situation, the dimensionless time taken for equilibrium position is to be nearly the same regardless of fluid viscosity when a dimensionless time variable is introduced

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.2
• /
• pp.45-52
• /
• 2002

Recently there have been growing disputes between neighboring local governments over jurisdictional rights or property rights of ocean resources in Korean coastal waters. The reasons for the disputes come mainly from the increasing interests by local governments that begin to see the oceans as the source of resources and wealth. The maritime dispute is more complicated and sticky than the inland ones, and requires not only socio-economical but political approach, therefore sometimes demanding a plenty of time and endeavor. Also coastal states that have suffered from maritime boundary problems have different issues under the different environment and historical background. For Korea, as the maritime boundary issue has very recently soared to the surface, though it was latent for the period as long as 20 years, we have just taken steps toward an institutional approach on it, seemingly more to go to reach an agreeable resolutions to the disputes. This paper highlighted the issues surrounding the maritime boundary on the sea surrounding Korean peninsular after addressing the current situation of the boundary disputes. It will help explore and assess the possible solutions to the boundary conflicts over the lateral boundary between local governments.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.1
• /
• pp.38-44
• /
• 2018

This paper presents an analysis on driving safety in lane change situation based on road driving data. Autonomous driving is a global trend in vehicle industry. LKAS technologies are already applied in commercial vehicle and researches about lane change maneuver have been actively studied. In autonomous vehicle, not only safety control issue but also imitating human driving maneuver is important. Driving data analysis in lane change situation has been usually dealt with ego vehicle information such as longitudinal acceleration, yaw rate, and steering angle. For this reason, developing safety index according to surrounding vehicle information based on human driving data is needed. In this research, driving data is collected from perception module using LIDAR, radar and RT-GPS sensors. By analyzing human driving pattern in lane change maneuver, safety index that considers both ego vehicle and surrounding vehicle state by using relative velocity and longitudinal clearance has been designed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.4
• /
• pp.361-366
• /
• 2013

A full-range analytic drain current model for depletion-mode long-channel surrounding-gate nanowire field-effect transistor (SGNWFET) is proposed. The model is derived from the solution of the 1-D cylindrical Poisson equation which includes dopant and mobile charges, by using the Pao-Sah gradual channel approximation and the full-depletion approximation. The proposed model captures the phenomenon of the bulk conduction mechanism in all regions of device operation (subthreshold, linear, and saturation regions). It has been shown that the continuous model is in complete agreement with the numerical simulations.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.10a
• /
• pp.32-37
• /
• 1993

A method of tunnel analysis for a new type of tunnel construction method (ACLCM, Automatic Concrete Lining Construction Method) is presented here. ACLCM is an unique tunnel construction method which provides concrete lining at the end of shield machine by extruding concrete into the space between the excavated ground surface and the inner form (Automatic Concrete Lining Machine). Since behaviors of tunnel and the surrounding soils are greatly influenced by the construction method, existing tunnel design methods may not be applicable to the design of ACLCM tunnel. In this study, a method of ACLCM tunnel analysis is suggested to provide the prediction of behavior of ACLCM tunnel and surrounding soils as well as to check up the safety during the construction and after the completion of ACLCM tunnel

• Tunnel and Underground Space
• /
• v.1 no.2
• /
• pp.168-180
• /
• 1991

Through field measurements, it was shown that the shear stresses along a fully grouted rock blot were proportional to the differences between the displacement of a bolt rod and that of surrounding rock. Accordingly the theoretical equation for the displacement along a rock bolt, R(x), can be proposed as differential form; $ \frac{d^2R(x)}{dx^2}-aR(x)=-a^2U(x)$ where U(x) is the displacement of surrounding rock and α is a constant. In this study above equation was applied to the boundary element analysis which can simulate the supporting behavior of each rock bolt around a tunnel and the results of the implementation of boundary element technique were shown.