• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.112-120
• /
• 2019

Benzene is a class 4 hazardous material according to the Act on the Safety Control of Hazardous Substances. This study qualitatively evaluated the damage size of a "toxic" accident and "pool fire" accidents based on benzene in a virtual scenario of a fire and leakage accident during unloading at a port facility. The KORA program was used as an evaluation method, which is supported as a universal program by the National Institute of Chemical Safety. The range of damage effects of a benzene-induced fire and leakage accident was predicted. In the case of toxic damage range, the accident's damage effect range for the "worst case scenario" was reduced by up to 5.11% with a decrease in the size of the leakage hole. In the case of the leakage time, the damage effect range increased to 145.12% with a 10 min leakage time compared to that of a 5 min leakage time and went up to 20 min (212.29%) with a 20 min leakage time. In the case of pool-fire-induced damage, the damage effect range by radiant heat in the "worst case scenario" was 228.8 m in radius from the center of the handling facility. In the "alternative scenario," the damage effect range by radiant heat was reduced by up to 8.26% compared to that in the "worst case scenario" since the size of the leakage hole was decreased by reducing the cross-sectional area of the pipe.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.2
• /
• pp.252-281
• /
• 2010

In this paper, we analyze the result of the Technology Level Evaluation of 'Biochip and biosensor (BB) Technology' consisted of 3 sub-categorized technologies; biochip sensing (BS), lab on a chip and high-efficient customized health care technology. As an analysis tool, authors used a delphi (a repeated survey) and dynamic methodology with technology growth model to overcome limits of previous evaluations. As a result, levels of BB were evaluated 51.5% (Korea) and 75.1% (US), and the technology gap between two countries was 6.1 yrs. In 2013, these levels were expected to change to 60.1% (Korea), 78.4% (US) and 4.3 yrs, respectively. In comparison with other biotechnology, the gap of BB was smaller and expected to catch up with US faster. In the case of sub-categorized technologies, they showed the smallest gap and would have faster catch-up speed than other sub-categorized technologies in the Biotechnology field. Based on the result of the survey, relative superiority of BB in Korea was originated from competent researchers and research fund, but weak basic science would be weak points. We think that BB's characteristic as an emerging technology and concentrated research activities on BB are additional strong points. This research proposes the supporting and supplemented points to promote the BB in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.39-45
• /
• 1981

Distal-extension removable partial dentures have long been implicated in the increase in mobility and the destruction of the supporting structures of the primary abutment teeth. Various clasping systems have traditionally been used to retain distal extension removable partial dentures, and other designs have been proposed to minimize torquing forces on the abutment teeth. Most recent studies investigating the effects of removable partial dentures on abutment teeth have been performed in it laboratory setting. Results obtained from in vitro research have given dentists insight into removable partial denture design, but laboratory test model cannot be constructed that simulates actual functional or parafunctiona1 movements and forces. The purpose of this study was to clinically evaluate the degree of tooth mobility produced by two clasping systems (suprabulge type and infrabulge type) used for distal extension removable partial dentures. Akers clasp and R.P.I. system were selected for the evaluation, and four patients required a distal extension removable partial denture on the mandibular arch were selected for participation in the study. Two partial dentures were constructed in the same condition expect the design of clasp. All abutments in the study were mandibular first or second premolars. Measurements of mobility were made with a research tool designed by $M\"{u}hlemann$. This instrument, periodontometer, measures tooth mobility in the mouth by means of a dial gauge accurated to 0.01mm when the tooth is stressed with a force meter. Lingual and buccal deflection of abutment tooth was measured using buccal and lingual pressure. The amount of force applied was 500gm. Tooth mobility tests were made at four key stages; 1. Before insertion of the first removable partial denture, baseline mobility was establsihed. 2. After wearing of the first prosthesis, measurement was made at weekly intervals for 4 weeks. 3. The removable partial denture was then taken from the patient, and tooth mobility was measured again at weekly intervals until the patient's established baseline mobility had returned. 4. The second prosthesis of different clasp design was worn for a month and evaluated in the same manner as the first. The sequence of placement of clasping system was alternated between patients. The following results were obtained from this study; 1. The mobility of abutment tooth increased during the initial stage of wear and returned to baseline mobility after removal of removable partial dentures. 2. The mobility of abutment tooth showed no difference between Akers clasp and I-bar clasp during the 4-week test period. 3. All teeth tested showed greater mobility toward the buccal than the lingual direction.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.4
• /
• pp.1-22
• /
• 1997

This paper was focused on the efficient management of landscape woody plants, and concerned itself with their important role in the urban environment. Based on the philosophy that there is nothing that can be done without an inventory, the purpose of this study was to develop an inventory system and iris proper application to a site for establishing a management plan Two different approaches were used, The first was to make a newly structured inventory system through collecting, analyzing, and evaluating various types of inventories used in Korea, the U. S. A., and Japan. The second approach was to apply a newly designed inventory system to the case study area. using GIS 'as a tool of spacial analysis and statistics for making decisions. The results could be summarized as follows; 1. In Korea, most of the Landscape Woozy Plants Inventories had datas which represented possession of trees, and only the work which they had done according to their traditional ways, There was no data related to the conditions, management needs, and site conditions of individual trees, This is essential information for organizing an inventory system . 2. There needs to be data which is balanced, containing tree characteristics and site characteristics. Through such information the management needs could be adjusted properly. The inventory list described in this paper was determined by botanical identity, placement condition, condition of tree, and types of work for maintaining as well as improving the condition of each tree One of the most important things was to determine the location data of each tree so as to compare data with other trees. The data gained from the field survey still had some problems because of lack of scientific method for supporting objective views, and because of actual situations, especially in the field of evaluating site conditions and management needs. All data should be revised to fit a computer data management system , if possible 3. The GIS(Geographic Information System) application showed good performance in handling inventory data for decision making. All the data used for the GIS application was divided into location and non-spatial data. Using the location data, it was easy to find the exact location of each tree on the monitor and on the maps generated by the computer even in the actual managed trite, along with various attribute data. Therefore it could be said that the entire management plan should start from data of individual trees with their exact locations, for making concrete management goals through actual budget planning.

• Journal of KIISE:Software and Applications
• /
• v.33 no.7
• /
• pp.589-604
• /
• 2006

Software product lines (SPL) are recently an emerging software reuse paradigm, which helps organizations develop their products from reusable core assets rather than from scratch. For developing these assets, understanding commonality and variability (C&V) is essential. A feature-oriented approach has been used extensively for C&V analysis in the SPL. However, this contains no proposal to systematically identify features and provide the rationale for the features. Further, the approach does not directly show how the results of C&V analysis will satisfy an organization's high-level business goals and provide the rationale for the C&V. Therefore, this paper presents a domain analysis method for the SPL based on goals, scenarios, and features in order to overcome some of the deficiencies and limitations of the feature-oriented approach. In particular, the paper proposes a domain requirements model (DRM) and a domain requirements modeling method based on the DRM. This method has been applied to the home integration system (HIS) domain to demonstrate its feasibility with a supporting tool, namely IDEAS. Our approach makes it possible to systematically identify the features and provide the rationale for both the features and the C&V.

• Journal of Science Education
• /
• v.33 no.1
• /
• pp.87-99
• /
• 2009

The purpose of this study was to evaluate the quality of biology contents of cyber home learning systems which provided by 16 metropolitan and provincial offices of education. The contents were evaluated by the 9 categories: needs assessment, instruction design, learning contents, teaching & learning strategy, interaction, supporting system, evaluation, ethicality and copy right. The result showed that the contents have advantage in detailed learning goal, useful learning environment, learning activities by level, and various learning parts material, but lack in evaluation method tool for personal learning by level and the latest learning material. Based on this results, it is expected that the barrier of the efficient learning contents should be searched for the complement, as well as the development high-quality educational contents and the management of cyber home learning system.

• Journal of KIISE:Software and Applications
• /
• v.34 no.7
• /
• pp.635-645
• /
• 2007

Component technology has been widely accepted as an effective way for building software systems with reusable components, and Microsoft (MS) .NET is one of the recent representative component technologies. Model Driven Architecture (MDA) is a new development paradigm which generates software by transforming design models automatically and incrementally. Transformation of structural models in MDA has been successfully applied. However, transformation of dynamic models and pervasive services, such as transaction service, security service, synchronization service and object pooling are largely remains as an area for further research. The recent enterprise system has multi tier distributed architecture, and the functionality of early mentioned pervasive services is essential for this architecture. .NET platform can implement Component Object Model+ (COM+) component for supporting pervasive services by specify Attribute code. In this paper, we specify the functionalities of the COM+ component offering pervasive services, and then those functionalities are defined by UML profile. By using the profile, the Platform Specific Model (PSM) for .NET/C# is specified, and .NET components are automatically generated through our tool. The development productivity, extensibility, portability, and maintenance of software can be dramatically improved by using of the proposed methods.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.390-395
• /
• 2004

The iSTMS is a web-based integrated information system supporting Pre-Service and In-Service Inspection(PSI/ISI) processes for the nuclear power plants of KHNP(Korea Hydro & Nuclear Power Co. Ltd.). The system provides a full spectrum coverage of the inspection processes from the planning stage to the final report of examination in accordance with applicable codes, standards, and regulatory requirements. The major functions of the system includes the inspection planning, examination, reporting, project control and status reporting, resource management as well as objects search and navigation. The system also provides two dimensional or three dimensional visualization interface to identify the location and geometry of components and weld areas subject to examination in collaboration with database applications. The iSIMS is implemented with commercial software packages such as database management system, 2-D and 3-D visualization tool, etc., which provide open, updated and verified foundations. This paper describes the key functions and the technologies for the implementation of the iSIMS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5227-5237
• /
• 2011

Technology roadmap is a powerful tool that considers relationships of technology, product and market and referred as a supporting technology strategy and planning. There are numerous studies that have attempted to develop technology roadmap and case studies on specific technology areas. However, a number of studies have been dependant on brainstorming and discussion of expert group, delphi technique as qualitative analysis rather than systemic and quantitative analysis. To overcome the limitation, patent analysis considered as quite quantitative analysis is employed in this paper. Therefore, this paper proposes new technology roadmapping based on patent citation network considering technology life cycle and suggests planning for undeveloped technology but considered as promising. At first, patent data and citation information are collected and patent citation network is developed on the basis of collected patent information. Secondly, we investigate a stage of technology in the life cycle by considering patent application year and the technology life cycle, and duration of technology development is estimated. In addition, subsequent technologies are grouped as nodes of a super-level technology to show the evolution of the technology for the period. Finally, a technology roadmap is drawn by linking these technology nodes in a technology layer and estimating the duration of development time. Based on technology roadmap, technology planning is conducted to identify undeveloped technology through text mining and this paper suggests characteristics of technology that needs to be developed in the future. In order to illustrate the process of the proposed approach, technology for hydrogen storage is selected in this paper.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.4
• /
• pp.165-172
• /
• 2020

In this paper we propose an uses on-device-based edge computing technology and big data analysis methods through the use of on-device-based edge computing technology and analysis of big data, which are distributed computing paradigms that introduce computations and storage devices where necessary to solve problems such as transmission delays that occur when data is transmitted to central centers and processed in current general smart factories. However, even if edge computing-based technology is applied in practice, the increase in devices on the network edge will result in large amounts of data being transferred to the data center, resulting in the network band reaching its limits, which, despite the improvement of network technology, does not guarantee acceptable transfer speeds and response times, which are critical requirements for many applications. It provides the basis for developing into an AI-based facility prediction conservation analysis tool that can apply deep learning suitable for big data in the future by supporting intelligent facility management that can support productivity growth through research that can be applied to the field of facility preservation and smart factory industry with integrated hardware technology that can accommodate these requirements and factory management and control technology.