• Journal of Industrial Convergence
• /
• v.18 no.4
• /
• pp.111-123
• /
• 2020

This study analyzed current use of 2-block haircut styles and preferences for accurate understanding of the haircut and enhancement of its efficiency. For this, a questionnaire survey was performed against 441 men in their 20~40s living in Jeollanam-do from June 27 to July 6, 2019. A total of 430 copies were used for final analysis. The collected data were analyzed by frequency analysis and cross-tabulation analysis, using SPSS 21.0, and the results found the followings: When asked about the factors affecting their choice of the haircut, 58.4% (20~40s in age) responded, 'my own decision'. Second, 61.2% said that they were interested in a 2-block haircut, and 54.7% responded that they had the haircut before. Among them, 92.3% said that they were satisfied with the trendy undercut. The above results confirm that men's appearance management is now essential, considering changes in social environments. People envision their hairstyle and visit a hair salon based on their own will, not after recommendation from their acquaintances. Many customers prefer a 2-block haircut because they believe it looks good on them. In addition, they choose the easy-to-care undercut to have a clean and neat image. It is anticipated that the study results would make a contribution to suggesting basic academic data and enhancing sales in a 2-lock haircut which is expected to remain popular. Therefore, it proposes in-depth studies on new 2-block haircut styles for women.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.66-74
• /
• 2018

In order to evaluate the precision degree of the blocks on the dock, the shipyards recently started to use the point cloud approaches using the 3D scanners. However, they hesitate to use it due to the limited time, cost, and elaborative effects for the post-works. Although it is somewhat traditional instead, they have still used the electro-optical wave devices which have a characteristic of having less dense point set (usually 1 point per meter) around the contact section of two blocks. This paper tried to expand the usage of point sets. Our approach can estimate the rework time to weld between the Pre-Erected(PE) Block and Erected(ER) block as well as the precision of block construction. In detail, two algorithms were applied to increase the efficiency of estimation process. The first one is K-mean clustering algorithm which is used to separate only the related contact point set from others not related with welding sections. The second one is the Concave hull algorithm which also separates the inner point of the contact section used for the delayed outfitting and stiffeners section, and constructs the concave outline of contact section as the primary objects to estimate the rework time of welding. The main purpose of this paper is that the rework cost for welding is able to be obtained easily and precisely with the defective point set. The point set on the blocks' outline are challenging to get the approximated mathematical curves, owing to the lots of orthogonal parts and lack of number of point. To solve this problems we compared the Radial based function-Multi-Layer(RBF-ML) and Akima interpolation method. Collecting the proposed methods, the paper suggested the noble point matching method for minimizing the rework time of block-welding on the dock, differently the previous approach which had paid the attention of only the degree of accuracy.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.145-150
• /
• 1996

The purpose of this study was to evaluate and compare the effectiveness of ilioinguinal-hypogastric nerve blocks(IHNB) and caudal block in producing post-orchiopexy and post-heniorrhaphy analgesia in children. Forty consenting healthy children, ages 3~10yr, were randomly assigned to receive caudal bupitvacaine (0.125%, 0.5ml/kg), or IHNB bupivacaine (0.25%, 0.3 ml/kg). Blocks were performed following the induction of general anesthesia, be fore the operation. Pre-anesthetic medication in form of atropine 0.01 mg/kg, droperidol 0.05 mg/kg were given intramuscularly one hour before induction to 40 children. Children were induced with thiopental sodium 5 mg/kg and succinylcholine 1 mg/kg intravenously. Anesthesia was maintained with oxygen-nitrous oxide ($FiO_2$ 0.3) and ethrane. When the patients stabilized after induction. IHNB was done in the supine position and caudal block was done in the lateral position. The local anaesthetic was injected after negative aspiration. Postoperative pain was assessed with face pain rating scale (RPRS) at rest on discharge of recovery room, and 5 hours after discharge of recovery room, and the "red and white" visual analogue scale (VAS) at rest and mobilization from supine to sitting position on discharge of recovery room, and 5 hours after discharge of recovery room. Post-operative recovery was quiet and comfortable, without side effect. Relief of ain was complete in both IHNB group and caudal group. Surgeons, parents and recovery room personnel were satisfied. There were no surgical or anesthetic complications. In our study, the postpoerative pain scores were similar in both IHNB group and caudal group. IN conclusion, we found that both IHNB and caudal blocks before the start of surgery for orchiopexy & herniorrhaphy are safe and effective in controlling the postoperative pain of children.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.259-261
• /
• 2009

최근에 기업들이 지역별 특성을 고려한 마케팅전략을 수립하기 위해 GIS를 활용하려는 시도가 이어지고 있다. 그러나 GIS 데이터의 특성상 일반 고객들이 손쉽게 접근하기 어려운 상황이다. 따라서 GIS 데이터의 한계를 극복하고 기업의 효율적인 타겟마케팅 업무지원을 위해 본 연구에서는 공간단위를 블록으로 구성하고 그 활용방안을 모색해보는 것을 목적으로 하였다. 블록의 영역을 구분한 후, 특성을 표현하기에 유의미한 인문사회적 요인으로 분류하였다. 이렇게 구성된 블록은 판매 상승 혹은 판매 하락 지역의 특성을 파악할 수 있음을 물론, 이와 유사한 블록을 추출함으로써 잠재적인 상승판매 지역을 설정하여 유형별 특성에 따른 차별화된 마케팅 전략을 수립하는데 활용 될 수 있을 것으로 판단된다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2392-2394
• /
• 2000

In this research a real time control system was developed without program codings during control system designing procedures. On the Simulink window control system is designed in the form of block diagrams, program codes are produced automatically with the real time workshop package(RTW), then c compiler compiles the program codes. With this automatic real time program producing mechanism rapid prototyping is realized. To show effectiveness of the proposed designing scheme a DSP-based induction motor vector control system was constructed and implemented

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2019

Purpose: The purpose is to clarify the effect of additional scattering ratio on the edge of the block according to the increasing block thickness with low melting point lead alloy and pure lead in electron beam therapy. Methods and materials: $10{\times}10cm^2$ Shielding blocks made of low melting point lead alloy and pure lead were fabricated to shield mold frame half of applicator. Block thickness was 3, 5, 10, 15, 20 (mm) for each material. The common irradiation conditions were set at 6 MeV energy, 300 MU / Min dose rate, gantry angle of $0^{\circ}$, and dose of 100 MU. The relative scattering ratio with increasing block thickness was measured with a parallel plate type ion chamber(Exradin P11) and phantom(RW3) by varying the position of the shielding block(cone and on the phantom), the position of the measuring point(surface ans depth of $D_{max}$), and the block material(lead alloy and pure lead). Results : When (depth of measurement / block position / block material) was (surface / applicator / pure lead), the relative value(scattering ratio) was 15.33 nC(+0.33 %), 15.28 nC(0 %), 15.08 nC(-1.31 %), 15.05 nC(-1.51 %), 15.07 nC(-1.37 %) as the block thickness increased in order of 3, 5, 10, 15, 20 (mm) respectively. When it was (surface / applicator / alloy lead), the relative value(scattering ratio) was 15.19 nC(-0.59 %), 15.25 nC(-0.20 %), 15.15 nC(-0.85 %), 14.96 nC(-2.09 %), 15.15 nC(-0.85 %) respectively. When it was (surface / phantom / pure lead), the relative value(scattering ratio) was 15.62 nC(+2.23 %), 15.59 nC(+2.03 %), 15.53 nC(+1.67 %), 15.48 nC(+1.31 %), 15.34 nC(+0.39 %) respectively. When it was (surface / phantom / alloy lead), the relative value(scattering ratio) was 15.56 nC(+1.83 %), 15.55 nC(+1.77 %), 15.51 nC(+1.51 %), 15.42 nC(+0.92 %), 15.39 nC(+0.72 %) respectively. When it was (depth of $D_{max}$ / applicator / pure lead), the relative value(scattering ratio) was 16.70 nC(-10.87 %), 16.84 nC(-10.12 %), 16.72 nC(-10.78 %), 16.88 nC(-9.93 %), 16.90 nC(-9.82 %) respectively. When it was (depth of $D_{max}$ / applicator / alloy lead), the relative value(scattering ratio) was 16.83 nC(-10.19 %), 17.12 nC(-8.64 %), 16.89 nC(-9.87 %), 16.77 nC(-10.51 %), 16.52 nC(-11.85 %) respectively. When it was (depth of $D_{max}$ / phantom / pure lead), the relative value(scattering ratio) was 17.41 nC(-7.10 %), 17.45 nC(-6.88 %), 17.34 nC(-7.47 %), 17.42 nC(-7.04 %), 17.25 nC(-7.95 %) respectively. When it was (depth of $D_{max}$ / phantom / alloy lead), the relative value(scattering ratio) was 17.45 nC(-6.88 %), 17.44 nC(-6.94 %), 17.47 nC(-6.78 %), 17.43 nC(-6.99 %), 17.35 nC(-7.42 %) respectively. Conclusions: When performing electron therapy using a shielding block, the block position should be inserted applicator rather than the patient's body surface. The block thickness should be made to the minimum appropriate shielding thickness of each corresponding using energy. Also it is useful that the treatment should be performed considering the influence of scattering dose varying with distance from the edge of block.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.114-120
• /
• 2008

XLPE cable is using insulator for Cross Linked Polyethylene(XLPE), because insulation Performance is superior and easy comparatively. Need systematization of accident transaction for electrical equipment accident, It is no disposal standard for defect of manufacture and second to accidents. in this paper deals with the change of XLPE cable insulation. To understand the electrical properties of XLPE insulation. Made of XLPE block sample, Penetration fracture Sample and flashover sample. Ogura needles having tip radius of $10[{\mu}m]$ were inserted into each sample. AC voltage of 1[kV/sec] increased at 60[Hz] were apple to breakdown sample and flashover sample. AC voltages of 12[kV], 17[kV] at 60[Hz] were a lied to XLPE block sample. The electrical properties of specimens were measured were measured from initiation of tree and breakdown to their characteristics were analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2317-2328
• /
• 1997

The objective of this paper is to develop an algorithm for a real-time automatic fingerprint recognition system. The algorithm employs the wavelet transform(WT) and the dominat local orientation that derived from the gradient Gaussian(GoG) and coherence in determining the directions of ridges in fingerprint images. By using the WT, the algorithm does not require conventional preprocessing procedures such as smothing, binarization, thining and restoration. For recognition, two fingerprint images are compared in three different ST domains;one that represents the original image compressed to quarter(LL), another that shows vertical directional characteristic(LH), and third as the block that contains horizontal direction(HL) in WT domain. Each block has dominat local orientation that derived from the GoG and coherence. The proposed algorithm is imprlemented on a SunSparc-2 workstation under X-window environment. Our simulation results, in real-time have shown that while the rate of Type II error-Incorrect recognition of two identical fingerprints as the identical fingerprints-is held at 0%, the rate of Type I error-Incorrect recognitionof two identical fingerprints as the different ones-is 2.5%.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.251-253
• /
• 2009

본 연구에서는 팔의 굽힘(flexion)과 폄(extension)운동 시 물체의 무게에 따른 저크의 변화를 통해 부드러움을 정량화하고, 물체무게와 움직임의 형태(type)에 따른 동작의 부드러움을 비교하고자 한다. 10 명의 오른손잡이 남자 대학생(평균 $24.8{\pm}1.1$ 세)을 실험 참여자로 선정하였다. 물체무게(0g, 1000g)와 움직임의 형태(손등 위/아래)를 달리하여 팔의 굽힘과 폄 운동을 실시하였다. 또한 3 축 가속도 센서를 이용하여 x 와 z 축의 가속도를 측정하였고, 측정된 신호로 부터 저크값을 추출 하였다. 실험은 총 8 분으로 4 개의 block 으로 구성되며 각 block 은 resting 구간 1 분과 lifting 구간 1 분으로 구성된다. 실험 결과 물체무게 0g 에 비해 1000g 에서 가속도와 정규저크 값이 유의미하게 감소하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.1
• /
• pp.112-125
• /
• 2012

This study researches the preferred ease of torso sloper according to body sizes and drop. For this, the eases of main body parts such as chest circumference, waist circumference, hip circumference, biacromion length, and waist back length were analysed; in addition, the drop differences of body and pattern were explored to find out characteristics of silhouette changes. The subjects were 55 women in their early 20s (aged from 20 to 24) and individual torso block made with muslin was corrected 1-3 times by a personal fitting. There were 3 meaningful results. First, the preferred ease were individually various; however, the eases of all torso blocks should be same at the pattern making step. Second, the eases were also significantly different among body size groups and the bigger group preferred less ease at the biacromion length, waist back length, armhole-depth, chest circumference, and waist circumference. Third, the eases of chest circumference and hip circumference were significantly changed among drop groups. To change their body drop, H-shape drop adopted less ease at chest circumference and more ease at hip circumference; however, A-shape drop adopted more ease at chest circumference and less ease at hip circumference.