• 한국지리정보학회지
• /
• 제15권3호
• /
• pp.103-118
• /
• 2012

분포형 모형은 유역내에서 공간 분포된 임의 지점의 유출해석 결과를 손쉽게 얻을 수 있다. 이때 다양한 특성을 가지는 소유역으로 구성된 유역의 경우, 소유역에 대해 신뢰성 있는 유출량을 얻기 위해서는 소유역별로 보정된 모형을 적용해야 한다. 본 연구에서는 관측 유량자료가 있는 소유역별로 모형을 보정할 수 있는 다지점 보정 기술을 개발하였다. 이를 위해서 다지점 보정 대상매개변수의 선정 및 적용 방법과 소유역 네트워크 정보를 설정하는 방법을 제시하였다. 또한 다지점 보정 모듈을 구현하기 위한 클래스를 설계하고 GUI를 개발하였으며, 소유역별로 설정된 매개 변수를 이용한 유출해석 절차를 정립하였다. 다지점 보정 모듈을 낙동강 수계 선산 유역($977km^2$)에 적용하였다. 적용결과 다지점 보정 모듈은 유역내 소유역에 대한 모형의 보정에 효과적으로 적용할 수 있었으며, 다지점 보정에 의해서 소유역의 유출해석 결과를 향상시킬 수 있었다.

• 한국관개배수논문집
• /
• 제13권2호
• /
• pp.262-273
• /
• 2006

The Soil and Water Assessment Tool (SWAT) model has been widely used in hydrology and sediment simulation worldwide. In most cases, the SWAT model is first calibrated with adjustments in model parameters, and then the validation is performed. However, very little study regarding the effects on SWAT estimation of subwatershed delineation was performed. Thus, the SWAT model was applied to the Doam-dam watershed with various threshold values in subwatershed delineation in this study to examine the effects on the number of subwatershed delineated on SWAT estimation. It was found the flow effect of subwatershed delineation is negligible. However there were huge variations in SWAT estimated sediment, T-N, and T-P values with the use of various threshold value in watershed delineation. Sometimes these variations due to watershed delineation are beyond the effects of parameter adjustment in model calibration and validation. The SWAT is a semi-distributed modeling system, thus, the subwatershed characteristics are assumed to be the same for all Hydrologic Response Unit (HRU) within that subwatershed. This assumption leads to variations in the SWAT estimated sediment and nutrient output values. Therefore, it is strongly recommended the SWAT users need to use the HUR specific slope length and slope value in model runs, instead of using the slope and the corresponding slope length of the subawatershed to exclude the effects of the number of subwatershed delineated on the SWAT estimation.

• 한국농공학회논문집
• /
• 제61권1호
• /
• pp.9-20
• /
• 2019

The primary objective of this study was to analyze the delivery ratio using Hydrological Simulation Program - Fortran (HSPF) in Okdong-cheon watershed. Model parameters related to hydrology and water quality were calibrated and validated by comparing model predictions with the 8-day interval filed data collected for ten years from the Korea Ministry of Environment. The results indicated that hydrology and water quality parameters appeared to be reasonably comparable to the field data. The pollutant delivery loads of the watershed in 2015 were simulated using the HSPF model. The delivery ratios of each subwatershed were also estimated by the simple ratio calculation of pollutant discharge load and pollutant delivery load. Coefficients of the regression equation between the delivery ratio and specific discharge were also computed using the delivery ratio. Based on the results, multiple regression analysis was performed using the discharge and the physical characteristics of the subwatershed such as the area. The equation of delivery ratio derived in this study is only for the Okdong-cheon watershed, so the larger studies are needed to apply the findings to other watersheds.

• 물과 미래
• /
• 제12권1호
• /
• pp.56-59
• /
• 1979

직접유출 수문곡선의 감수부를 유발하는 지표하류출 과정이 사대종확산모형기법에 의하여 모의되었다. 유출과정은 필시곡선도에 의한 소유역을 대표하는 개급적 선형 수로를 통하여 상류선형수로의 유출과 핵심 소유역의 유효강우량을 추적하여 수행된다. 유출 속도, 확산인자, 침투와 지표하흐름 영역에 관한 매개변수의 산출과정이 기록된다.

• 한국농공학회논문집
• /
• 제51권1호
• /
• pp.1-9
• /
• 2009

The objective of this paper was to evaluate the auto-calibration with multi-objective optimization method to calibrate the parameters of the Soil and Water Assessment Tool (SWAT) model. The model was calibrated and validated by using nine years (1996-2004) of measured data for the 384-ha Baran reservoir subwatershed located in central Korea. Multi-objective optimization was performed for sixteen parameters related to runoff. The parameters were modified by the replacement or addition of an absolute change. The root mean square error (RMSE), relative mean absolute error (RMAE), Nash-Sutcliffe efficiency index (EI), determination coefficient ($R^2$) were used to evaluate the results of calibration and validation. The statistics of RMSE, RMAE, EI, and $R^2$ were 4.66 mm/day, 0.53 mm/day 0.86, and 0.89 for the calibration period and 3.98 mm/day, 0.51 mm/day, 0.83, and 0.84 for the validation period respectively. The statistical parameters indicated that the model provided a reasonable estimation of the runoff at the study watershed. This result was illustrated with a multi-objective optimization for the flow at an observation site within the Baran reservoir watershed.

• 한국습지학회지
• /
• 제13권3호
• /
• pp.385-394
• /
• 2011

본 연구에서는 유역의 배수구조를 지표면과 하천으로 구분하여 확산-유추 지형학적 순간단위도의 최적 매개변수를 산정하였다. 모형의 매개변수는 지표면과 하천 각각의 유속($u_c$, $u_h$) 및 확산계수($D_c$, $D_h$)로 구성하였다. 대상유역은 보청천 유역의 탄부 소유역을 선정하였으며, 대상유역의 하천망은 Strahler 차수법칙에 의해 4차 하천으로 분류되었다. 최적화 기법은 SCE-UA을 적용하였으며, 추정된 최적 매개변수는 다음과 같다; $u_c$ : 0.589 m/s, $u_h$ : 0.021 m/s, $D_c$ : $34.469m^2/s$, $D_h$ : $0.1333m^2/s$. 추정된 매개변수의 검증결과 평균 첨두유량 오차는 약 11 %, 첨두시간 오차는 0.3 hr로 양호하게 나타났다. 또한 매개변수들의 변동성을 살펴본 결과 하천확산계수($D_c$)는 수문응답함수에 큰 영향을 미치지 못함을 알 수 있었으며, 향후에는 이러한 결과들을 고려함으로서 모형을 좀 더 간편화할 수 있을 것으로 기대된다.

• 대한공간정보학회지
• /
• 제11권3호
• /
• pp.47-53
• /
• 2003

격자크기에 따른 경사도 분석과 소유역에 대하여 축척별 격자크기(cell size)가 수문인자 결정에 어떠한 영향을 미치는지 연구하고자, 본 연구에서는 수영강 유역의 토지이용도 및 토양도를 분류 선정한 후 GIS를 이용하여 CN을 계산하고, 이 값을 이용하여 수영강 유역의 유출모형을 분석하는데 요구되는 수문학적 지형인자의 결정에 기초자료로 활용하고자 한다. 각 격자크기에 따라 CN을 산정한 결과, 본 연구에서는 격자크기가 $100m{\times}100m$인 경우 가장 최적인 것으로 나타났다.

• 한국수자원학회논문집
• /
• 제32권5호
• /
• pp.515-524
• /
• 1999

본 연구는 토양수분의 공간적 분포를 고려하는 과정에서 TOPMODEL이 가지고 있는 구조상의 문제를 해결하는 방안을 제시한다. 포화초과유출을 모의하는 기존 TOPMODEL은 유출모의시 유역내 포화부분의 공간적인 정보를 반영하는 과정에 있어 포화면적의 연결성을 고려한 유출 알고리즘의 개발로 발전되었다. 개발된 알고리즘은 TOPMODEL의 매개변수를 증기시키지 않고 개선된 유출경로 추적의 근거를 제시함으로써 모형의 합리성과 적용성을 제고시켰다. 본 연구에서 개발된 포화면적 연결모형과 기본적인 통계적 입력모형형태의 TOPMODEL을 국제수문개발계획 대상유역인 위천유역내의 동곡소유역에 적용한 결과 본 연구에서 개발된 포화면적 연결모형이 다른 두 모형에서 발생하는 모의시 과도첨두유량계산의 문제를 해결할 수 있었다.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.75-83
• /
• 2013

PURPOSES: In this study, flood mitigation effect of drainage asphalt concrete pavement were analyzed by a SWMM 5.0 program in order to evaluate the low impact development (LID) based on the drainage asphalt concrete pavements. METHODS: In order to determine the porosity parameters of drainage asphalt concretes, the specimen mixtures were manufactured using the conditions presented in the previous study. The numerical simulation was conducted using the SWMM 5.0 program considering the flood mitigation effect of drainage asphalt concrete pavements. The effect of flood reduction can be observed when drainage asphalt concrete pavements were applied to Mokgamcheon watershed. The flood mitigation effect analysis of Mokgamcheon watershed as well as continuous simulation of subwatershed runoff were performed through this study. RESULTS : The analysis of drainage asphalt concrete pavements was carried out for evaluating the effect on runoff, resulting in: the peak flow decreases up to 1.26~9.53% after drainage asphalt concrete pavements applied in the SWMM 5.0 program furthermore, the discharge decreases up to 0.55~4.11%. CONCLUSIONS: As a result, the reduced peak flow and discharge were found through the SWMM 5.0 program. It can be concluded that the flood is effectively reduced when the drainage asphalt concrete pavements are used.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.454-458
• /
• 2007

Nonpoint source (NPS) pollution is a serious problem causing the degradation of soil and water quality. Concentrated overland flow is the primary transport mechanism for a large amount of NPS pollutants from hillslope areas to downslope areas in a watershed. In this study, a soil erosion model, nLS model, to identify transitional overland flow regions (i.e., ephemeral gully head areas) was developed using the kinematic wave overland flow theory. Spatial data, including digital elevation models (DEMs), soil, and landcover, were used in the GIS-based model algorithm. The model was calibrated and validated using gully head locations in a large agricultural watershed, which were identified using 1-m aerial photography. The model performance was better than two previous approaches; the overall accuracy of the nLS model was 72 % to 87 % in one calibration subwatershed and the mean overall accuracy was 75 to 89 % in four validation subwatersheds, showing that the model well predicted potential transitional erosion areas at different watersheds. However, the user accuracy in calibration and validation was still low. To improve the user accuracy and study the effects of DEM resolution, finer resolution DEMs may be preferred because DEM grid is strongly sensitive to estimating model parameters. Information gained from this study can improve assessing soil erosion process due to concentrated overland flow as well as analyze the effect of microtopographic landscapes, such as riparian buffer areas, in NPS control.