• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.304-308
• /
• 2006

The focus of this study is modeling technique for a bellows in vehicle exhaust system. Bellows was developed using tile finite element model by replacing with the equivalent beam. The equivalent beam model were studied in detail. Non-structural node in the cross section of original model is given to expressing their motion. Equivalent mass matrix and stiffness matrix calculated using Guyan reduction method. Material Properties of beam was obtained from the direct comparison between equivalent model and that of Timoshenko beam model. The calculated natural frequencies and mode shape are compared with the reference results and coincided well. The results were compared with the confirmed results, which were in good agreement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.353-358
• /
• 1998

In general, we have used the finite element method(FEM) to find natural frequencies of plates. In this method, however, it is necessary to use a large amount of computer memory and computation time because the FEM requires many degrees of freedom for finding natural frequencies of plates correctly. Therefore it was very difficult to analyze the free vibration of plates correctly on personal computer. For overcoming this disadvantage of the FEM, the authors have developed the finite element-transfer stiffness coefficient method(FE-TSCM) which is based on the concept of modeling techniques in the FEM and the transfer of the stiffness coefficient in the transfer stiffness coefficient method. In this paper, we formulate free vibration analysis algorithm of rectangular plates using the FE-TSCM. Some numerical examples of rectangular plates are proposed, and their results and computation times obtained by the FE-TSCM are compared with those by the FEM and the finite element-transfer matrix method in order to demonstrate the accuracy and efficiency of the FE-TSCM.

• Structural Engineering and Mechanics
• /
• 제13권4호
• /
• pp.437-453
• /
• 2002

In this paper, dynamic stiffness and flexibility for circular membranes are analytically derived using an efficient mixed-part dual boundary element method (BEM). We employ three approaches, the complex-valued BEM, the real-part and imaginary-part BEM, to determine the dynamic stiffness and flexibility. In the analytical formulation, the continuous system for a circular membrane is transformed into a discrete system with a circulant matrix. Based on the properties of the circulant, the analytical solutions for the dynamic stiffness and flexibility are derived. In deriving the stiffness and flexibility, the spurious resonance is cancelled out. Numerical aspects are discussed and emphasized. The problem of numerical instability due to division by zero is avoided by choosing additional constraints from the information of real and imaginary parts in the dual formulation. For the overdetermined system, the least squares method is considered to determine the dynamic stiffness and flexibility. A general purpose program has been developed to test several examples including circular and square cases.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.72-77
• /
• 2008

Stability is a very important part which we must consider in structural design. In this paper, we take advantage of finite element method, and study about parametrical instability of star-dome structures, which is subjected to harmonically pulsating load. When calculating stiffness matrix, we consider elastic stiffness and geometrical stiffness simultaneously. In equation of motion, we represent displacements and accelerations by trigonometric series expansions, and then obtain Hill's infinite determinants. After first order approximation, we can get first and second order dynamic instability region finally.

• 전산구조공학
• /
• 제4권1호
• /
• pp.83-94
• /
• 1991

본 연구에서는 이상화구조요소법을 적용하여 골조구조물의 비선형해석을 높은정도로서 짧은 계산시간에 수행할 수 있는 해석이론과 컴퓨터프로그램을 개발하였다. 이를 위해 골조구조물을 구성하는 보-기둥(Beam-Column)부재에 대한 이상화구조요소를 부재에 존재하는 초기결함의 영향도 고려하여 정식화한다. 요소의 접선탄성강성행렬은 에너지원리를 적용하여 명시적인 형태로 도출하며, 최종강도조건은 요소에 소성붕괴메카니즘이 형성될때를 기준으로 정식화한다. 또한, 요소의 최종강도후 강성행렬도 근사적인 방법을 이용하여 명시적인 형태로 도출한다. 본해석법의 정도와 유용성은 단위부재 및 골조구조모형에 대한 기존의 실험 및 수치해석결과등과 비교하여 확인한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.623-625
• /
• 2000

For the finite element analysis of highly saturated rotating machines involving rotation of a rotor such as dynamic analysis. cogging torque analysis and etc, so much time is needed because a new system matrix equation should be solved for each iteration and time step. It is proved in this paper that. in linear systems. the computational time can be greatly reduced by using the domain decomposition method (DDM). In nonlinear systems. however. this advantage vanishes because the stiffness matrix changes at each iteration especially when using the Newton-Raphson (NR) method. The transmission line modeling (TLM) method resolves this problem because in TLM method the stiffness matrix does not change throughout the entire analysis. In this paper, a new technique for FEA of rotating machines including rotation of rotor and non-linearity is proposed. This method is applied to a test problem. and compared with the conventional method.

• 소음진동
• /
• 제7권4호
• /
• pp.571-578
• /
• 1997

Recently, many general-purpose packages for fluid-structure interaction problems have been announced. However, they have a lot of limitations to model structures in the fluid-structure interaction problems reasonably. Utilizing general-purpose packages such as MSC/NASTRAN and SYSNOISE, in this paper, a method to slove the radiation scattering problems with some accuracy in the fluid-structure interaction problems was developed. Using a simple model, the results from the presented method here are compared with those from SYSNOISE. The result shows quite a good agreement between the two methods. The problems, which could not be solved by SYSNOISE, were tried to solve with the presented method and results were presented. It was proved that this method could be safely used to solve fluid-structure interaction problems.

• Wind and Structures
• /
• 제25권5호
• /
• pp.459-474
• /
• 2017

In this study an analytical expression is derived for the natural frequency of the wind turbine towers supported on flexible foundation. The derivation is based on a Euler-Bernoulli beam model where the foundation is represented by a stiffness matrix. Previously the natural frequency of such a model is obtained from numerical or empirical method. The new expression is based on pure physical parameters and thus can be used for a quick assessment of the natural frequencies of both the real turbines and the small-scale models. Furthermore, a relationship between the diagonal and non-diagonal element in the stiffness matrix is introduced, so that the foundation stiffness can be obtained from either the p-y analysis or the loading test. The results of the proposed expression are compared with the measured frequencies of six real or model turbines reported in the literature. The comparison shows that the proposed analytical expression predicts the natural frequency with reasonable accuracy. For two of the model turbines, some errors were observed which might be attributed to the difference between the dynamic and static modulus of saturated soils. The proposed analytical solution is quite simple to use, and it is shown to be more reasonable than the analytical and the empirical formulas available in the literature.

• Structural Engineering and Mechanics
• /
• 제19권5호
• /
• pp.551-566
• /
• 2005

Using two different, but related approaches, an exact dynamic stiffness matrix for a two-part beam-mass system is developed from the free vibration theory of a Bernoulli-Euler beam. The first approach is based on matrix transformation while the second one is a direct approach in which the kinematical conditions at the interfaces of the two-part beam-mass system are satisfied. Both procedures allow an exact free vibration analysis of structures such as a plane or a space frame, consisting of one or more two-part beam-mass systems. The two-part beam-mass system described in this paper is essentially a structural member consisting of two different beam segments between which there is a rigid mass element that may have rotatory inertia. Numerical checks to show that the two methods generate identical dynamic stiffness matrices were performed for a wide range of frequency values. Once the dynamic stiffness matrix is obtained using any of the two methods, the Wittrick-Williams algorithm is applied to compute the natural frequencies of some frameworks consisting of two-part beam-mass systems. Numerical results are discussed and the paper concludes with some remarks.

• 전산구조공학
• /
• 제6권2호
• /
• pp.95-102
• /
• 1993

노후 구조물의 안전진단을 위하여 동적재하시험을 수행하고 그 결과를 유한요소모델과 같은 해석적 모델과 결합하여 기존구조물의 강성평가 및 파손부위 색출에 적용하고 있는데 측정점의 제한성과 유한요소모델의 많은 자유도가 측정데이타를 유한요소모델과 연계하는데 커다란 문제점으로 대두된다. 본 연구에서는 유한요소모델과 같이 많은 자유도를 갖는 구조계의 해석적 모델을 측정데이타와 결합하기 위하여 축약된 좌표계에서 구조계의 동강성행렬(dynamic stiffness matrix)표현방법을 제시하였다. 유한요소모델로부터 좌표계를 축약시 필연적으로 발생되는 주파수의존성(frequency dependency)을 고려하기 위하여 주파수영역에서 Chebyshev다항식으로 축약된 동강성행렬을 표시하였고 특이점에서 발생되는 악조건(ill-condition)을 극복하기 위하여 특이해분리(singular value decomposition)기법을 사용하였다. 제시된 방법의 검증을 위하여 간단한 구조계에 대하여 시뮬레이션을 수행하였으며 본 방법으로 수립된 구조계의 동적모델은 축약이전의 전체계에 대한 동적특성을 비교적 정확히 유지하고 있고 일반적으로 사용되는 정적축약 형태의 수학적 모델보다 우수함을 알 수 있었다.