• Corrosion Science and Technology
• /
• 제7권6호
• /
• pp.328-331
• /
• 2008

Corrosion behaviour of water intake gate steel structures with different protective measures was investigated. Five material alternatives were taken for investigation, including: imported and recycled stainless steel, carbon steel with hot zinc spraying, painting and composite coatings. Results of corrosion rate for carbon steel, SUS 304, hot zinc spray coats in three water systems of Mekong river basin (saline, blackish and fresh) were also presented. Corrosion rate of carbon steel decreased with decreasing salinity in the investigated water environments. Meanwhile, these values for zinc coated steel, behaved by another way. Environmental data for these systems were filed and discussed in relation with corrosion characteristics. Method of Life Cycle Assessment (LCA) was applied in materials selection for water intake gate construction. From point of Life Cycle Cost (LCA) the following ranking was obtained: Zinc sprayed steel < Recycled stainless steel < Composite coated steel < Painting steel < SUS 304 From investigated results, hot zinc spray coating has been applied as protective measure for steel structures of water intake systems in Mekong river basin.

• Journal of Pharmaceutical Investigation
• /
• 제28권1호
• /
• pp.7-13
• /
• 1998

The captopril microcapsules were prepared and were investigated by measuring their size distribution using Scanning Electron Microscopy(SEM) and dissolution of captopril. Cetyl alcohol microcapsules prepared by emulsion melted-cooled method with various ratios of drug to cetyl alcohol were spherical and uniform. The release rate of cetyl alcohol microcapsules was decreased proportionally as the content of cetyl alcohol increased but, the particle size of microcapsules was increased. The surface of cetyl alcohol microcapsules was comparatively rough as drug content increased. Pellet type microcapsules were prepared using fluidized-bed coating system by spraying captopril solution on nonpareil-seeds followed by applying $Eudragit^{\circledR}$ RS solution containing propylene glycol as a plasticizer. The release rate of drug from pellet type microcapsules decreased as the content of $Eudragit^{\circledR}$ RS increased.

• 한국분무공학회지
• /
• 제24권3호
• /
• pp.137-144
• /
• 2019

The Y-jet nozzle has benefits such as simple design and wide operating conditions. Because of these benefits, it is used in various combustion devices including industrial boilers. The most important variables in the design of the Y-jet nozzle are the mixing chamber length, the supply diameter of the liquid fuel and gas, and the exit orifice diameter. In addition, because of the use of a twin-fluid, optimized data is required depending on the spray condition. In this study, spray experiment was carried out under the pressure condition of 7 bar or more, which is the spraying condition used in industry. There was no change in flow rate with the length of the Y-jet nozzle mixing chamber, but the difference in SMD was confirmed. Adjusting the exit orifice diameter is most important to achieve the desired flow rate. Changes in the liquid and gas inlet port diameters ratio were found to be help improve the operating range and significant difference in SMD was observed.

• 한국분무공학회지
• /
• 제11권2호
• /
• pp.59-68
• /
• 2006

Experimental results of the metal powder production with internal mixing, internal impinging and the atomizer coupled with substrate design are presented in this paper. In a test with internal mixing atomizer, mean powder size was decreased from $37{\mu}m\;to\;23{\mu}m$ for Pb65Sn35 alloy as the gas-to-melt mass ratio was increased from 0.04 to 0.17. The particle size further reduces to $16.01{\mu}m$ as the orifice area is increased to $24mm^2$. The micrograph of the metal powder indicates that very fine and spherical metal powder has been produced by this process. In a test program using the internal impinging atomizers, the mean particle size of the metal powder was decreased from $22{\mu}m\;to\;12{\mu}m$ as the gas-to-melt-mass ratio increased from 0.05 to 0.22. The test results of an atomizer coupled with a substrate indicates that the deposition rate of the molten spray on the substrate is controlled by the diameter of the substrate, the height of the substrate ring and the distance of the substrate from the outlet of the atomizer. This in rum determines the powder production rate of the spraying processes. Experimental results indicate that the deposition rate of the spray forming material decreases as the distance between the substrate and the atomizer increases. For example, the deposition rate decreases from 48% to 19% as the substrate is placed at a distance from 20cm to 40cm. On the other hand, the metal powder production rate and its particle size increases as the subsrate is placed far away from the atomizer. The production of metal powder with mean particle size as low as $3.13{\mu}m$ has been achieved, a level which is not achievable by the conventional gas atomization processes.

• 식물조직배양학회지
• /
• 제28권5호
• /
• pp.273-276
• /
• 2001

두릅나무의 체세포배 유래 소식물체의 효과적인 순화 방법을 개발하고자 플라스틱 용기를 사용 4가지 인공배양토 및 MS 액체배지 등 7가지 수용액 처리를 통해 활착률 및 생장을 조사하였다. 상토는 perlite가 vermiculite보다 활착 및 생장에 양호하였고, 입자가 클수록 활착률 및 생장이 좋았다. 액체배지는 2차 증류수 처리가 가장 양호하여 96%의 활착률을 나타냈으며, 염류농도를 1/4 및 1/8로 낮춘 MS배지는 각각 92%의 활착률을 보인 반면 기본배지 및 1/2 MS배지는 활착률이 저조하였다. 한편 0.1% hyponex와 2% sucrose 처리는 84% 및 76%의 활착률을 각각 나타냈다. 결론적으로 두릅나무의 체세포배 유래 소식물체의 순화는 입자가 큰 perlite를 사용하고 증류수 처리 혹은 염류 농도를 낮춘 MS배지 처리로 효과적인 순화가 가능함을 보여주었다.

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.469-474
• /
• 2001

Milling the rice with low moisture requires more energy, produces more cracked rice, and results in reducing taste of cooked rice. Accordingly, it is necessary to add moisture to the rice with low moisture to obtain optimum moisture level for milling and taste of rice. This study was performed to evaluate the influence of initial moisture content and absorption rate on rice crack, milling energy and whiteness of milled rice and to obtain the information for design of rewetting system mounted on stirring device in grain bin. The tests were conducted for the four levels of initial moisture content in the range of 11.4 to 14.5%(w.b.) and six levels of absorption rate in the range of 0.04 to 1.0%, w.b./hr. In the case of lower moisture content below 12%(w.b.), crack ratios of brown rice were remarkably high regardless of initial moisture contents. Therefore, it was found that rough rice below 12%(w.b.) in initial moisture content could not rewetted by spraying water without crack generation of low level. Absorption rate must be below 0.3%, w.b./hr to maintain crack ratio increase of less than 1% regardless of initial moisture contents. In the case of allowable crack ratio increase of 2% and 5%, it was found that the maximum absorprion rate was respectively 0.6%, w.b./hr and 1.0%, w.b./hr in the initial moisture content of above 13.5%(w.b.). Rewetting the rough rice in moisture content of 11.4 to 14.5%(w.b.) to 14.3 to 16.9%(w.b.) decreased milling energy consumption by 15.9 to 22.3%. The effect of energy saving was higher in the samples of higher initial moisture content. Whiteness of milled rice was decreased by 0.5 to 1.5.

• 한국산림과학회지
• /
• 제87권2호
• /
• pp.308-315
• /
• 1998

암절취(岩切取) 훼손(毁損)비탈면에 적용할 수 있는 종비토(種肥土)뿜어붙이기공법(工法)용 녹화토양자재(綠化土壤資材)로서 산림표층토(山林表層土)의 이용(利用) 가능성(可能性)을 파악하기 위하여, 1996년 3월부터 현지조사 및 파종실험을 실시하였다. 산림토양(山林土壤)의 유형(類型) 및 토양의 피복(被覆)두께에 따른 식생생육특성을 파악하기 위하여 분할구배치법(分割區配置法)(주구(主區) : 산림토양의 유형과 토양피복두께, 세구(細區) : 파종량)에 의한 요인실험(要因實驗)을 실시한 결과를 요약하면 다음과 같다. 산림토양(山林土壤)에 함유된 잠재종자원(潛在種子源)의 발아 생육으로 외래초종(外來草種)을 파종하지 않는 시험구에서는 5~9종/$0.07m^2$이 자연적으로 발생하였다. 외래초종의 파종량을 증가시킬수록 초기에 우점된 외래초종의 영향으로 공시초종 3종외에 자연적으로 출현한 종은 2~6종/$0.07m^2$으로 감소하였다. 식생의 총 출현개체 수는 침엽수토양을 이용한 실험구에서 가장 높았으며, 자연적으로 발생한 종의 비율은 활엽수토양을 이용한 실험구에서 약 30%로서 가장 높게 나타났다. 잠재종자원(潛在種子源)을 함유한 산림토양을 생육기반으로 사용할 경우, 초기에 파종된 외래종(外來種)과 자연적으로 발생한 종의 공생으로 기존의 종자 사용량을 1,000본/$m^2$(발생기대본수) 수준으로 감소시켜도 조기에 다양한 식생을 조성할 수 있었다. 종비토뿜어붙이기공법에 적용시 파종한 종과 자연출현종과의 경쟁, 표층부의 건조, 하부에 매몰되는 종자원을 고려할 때 토양의 피복두께는 5cm 이상으로 하는 것이 다양한 식생의 생육에 적합한 것으로 나타났다..

• 농약과학회지
• /
• 제11권4호
• /
• pp.299-304
• /
• 2007

IGR계 농약은 곤충에는 독성이 강할 뿐만 아니라 내분비계에도 영향을 미치는 것으로 알려져 우리나라에서는 최근 관찰된 누에 미화용 현상의 원인으로 추정되기도 하여 본 연구는 가장 많이 사용된다고 알려진 IGR계 농약 diflubenzuron의 누에에 대한 독성을 평가하였다. 누에에 대한 급성독성시험과 뽕잎잔류 독성시험 결과에 의하면 diflubenzuron은 표준살포액을 10,000배 희석한 액에 노출된 누에에도 치명적 피해를 입히는 것으로 나타났고, 6주전에 야외에서 표준살포농도로 살포한 뽕잎을 급여하여도 누에가 치사되는 등 독성이 매우 강하였으나 최근 농가에서 나타난 미화용 현상은 관찰되지 않았다. 또 과수원으로부터의 비산을 가정하여 과수원에 diflubenzuron WP (25%)를 살포하고 거리별로 뽕잎을 채취하여 누에에 섭식시킨 결과, 바람이 부는 방향으로 50 m 까지만 화용비율에 영향을 미친 것으로 나타나 과수원에서 비산된 diflubenzuron의 피해를 막기 위해서는 100 m 정도의 안전거리를 둘 것을 추천한다.

• 한국작물학회지
• /
• 제29권3호
• /
• pp.285-290
• /
• 1984

대두에 왜화제인 B 995와 CCC를 살포시기별(본엽 4, 5, 6 매), 농도별 (500, 1000, 2000, 3000 ppm)로 엽면살포하여 생육 및 수량에 미치는 영향을 구명하고자 본 실험을 수행하여 얻어진 주요결과는 다음과 같다. 1. 약제별로는 경장에서만, 살포시기별로는 결협율에만, 그리고 농도별로는 경장, 분지수, 결협율, 주당협수와 수량에서만 유의성이 인정되었다. 2. 견장의 단축은 CCC보다는 B 995가 더 효과적이었으며 결협율은 본엽4 매시의 살포에서 가장 높았다. 3.농도별효과를 보면 저농도보다는 고농도인 3,000ppm에서 경장의 단축, 분지수, 결협율 그리고 주당협수의 증가와 수량의 증대를 나타냈다. 4. 주경절수, 경건중, 엽록소와 100입중은 약제살포시기 및 농도별로 유의성이 없었다. 5. 수량은 경장과는 부의 상관이었고 분지수, 주당협수, 결협율과는 정의 상관이었다. 6. 왜화제의 엽면살포는 주요수량구성 요소증대에 상당히 효과적이었다.

• 한국환경복원기술학회지
• /
• 제19권2호
• /
• pp.121-135
• /
• 2016

The present study is an analysis of the monitoring results of the four areas that underwent the experimental construction of Straw-net+seedspray, Vegetation media spray method(t=2cm), and Vegetation media spray method(t=3cm), with the purpose of selecting the adequate revegetation of cutting slopes in weathered granite soil. Cutting slopes are mostly designed in the Straw-net+seedspray method, but since weathered granite soil slopes tend to have an infertile soil quality that runs down, it is difficult for seed germination and growth. It is difficult to apply Straw-net+seedspray to weathered granite soil slopes considering the germination rate and coverage rate of the Straw-net+seedspray method, which accompanies erosion and scouring. The final conclusions are summarized as follows. First, Straw-net+seedspray has difficulty recruiting plants to infertile weathered granite soil, which results in a lower coverage rate and fewer species, so it is not adequate construction method. Second, Vegetation spraying methods with wet media are more advantageous in early revegetation. The wet construction methods are faster than the dry construction methods in terms of early germination and its early growth are more excellent. Third, when constructing Vegetation spray methods with dry media, it were more advantageous if the thickness was thicker. When the soil-media is thicker, the soil is resilient to droughts, so the thickness must be flexibly applied according to the soil quality and slant of the weathered granite soil slope. The present study is a monitoring result for some areas of Gangwon-do, so its results may differ from other areas.