• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.5
• /
• pp.59-71
• /
• 2020

Using high-resolution stereoscopic aerial images (in 2008, 2012 and 2016), we conducted to analyze the spatial characteristics affecting evergreen coniferous die-off in the northwestern ridge (major distribution area such as Abies nephrolepis), Seoraksan National Park. The detected number of dead trees at evergreen coniferous forest (5.24㎢) was 1,223 in 2008, was 2,585 in 2012 and was 3,239 in 2016. The number of cumulated dead trees was 7,047 in 2016. In recent years, the number of dead trees increased relatively in the northwest ridge, Seoraksan National Park. Among the analysed spatial factor (altitude, aspect, slope, solar radiation and topographic wetness index), the number of dead trees was increased in the conditions with high altitude, steep slope and dry soil moisture. A spatial distribution of dead tree was divided into 2 groups largely (high altitude with high solar radiation, low altitude with steep slope). In conclusion, the dead trees of evergreen coniferous were concentrated at spatial distribution characteristics causing dryness in the northwestern ridge, Seoraksan National Park.

• Korean Journal of Remote Sensing
• /
• v.29 no.6
• /
• pp.595-600
• /
• 2013

In order to spatially interpolate the near-surface temperature (Ta) values, satellite and reanalysis methods were used from previous studies. Accuracy of reanalysis Ta was generally better than that of satellite-based Ta, but spatial resolution of reanalysis Ta was large to use at local scale studies. Our purpose is to evaluate accuracy of reanalysis Ta and satellite-based Ta according to elevation from April 2011 to March 2012 in Northeast Asia that includes various topographic features. In this study, we used reanalysis data that is ERA-Interim produced by European Centre for Medium-Range Weather Forecasts (ECMWF), and estimated satellite-based Ta using Digital Elevation Meter (DEM), Normalized Difference Vegetation Index (NDVI), difference between brightness temperature of $11{\mu}m$ and $12{\mu}m$, and Land Surface Temperature (LST) data. The DEM data was used as auxiliary data, and observed Ta at 470 meteorological stations was used in order to evaluate accuracy. We confirmed that the accuracy of satellite-based Ta was less accurate than that of ERA-Interim Ta for total data. Results of analyzing according to elevation that was divided nine cases, ERA-Interim Ta showed higher accurate than satellite-based Ta at the low elevation (less than 500 m). However, satellite-based Ta was more accurate than ERA-Interim Ta at the higher elevation from 500 to 3500 m. Also, the width of the upper and lower quartile appeared largely from 2500 to 3500 m. It is clear from these results that ERA-Interim Ta do not consider elevation because of large spatial resolution. Therefore, satellite-based Ta was more effective than ERA-Interim Ta in the regions that is range from 500 m to 3500 m, and satellite-based Ta was recommended at a region of above 2500 m.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.4
• /
• pp.1-12
• /
• 2021

Recently, the use of unmanned aerial vehicles (UAVs) is increasing in the field of land information acquisition and terrain exploration through high-altitude aerial photography. High-altitude aerial photography is suitable for large-scale geographic information collection, but has the disadvantage that it is difficult to accurately collect small-scale geographic information. Therefore, this study used low-altitude UAV to monitor changes in small rural spaces around rural resources, and the results are as follows. First, the low-altitude aerial imagery had a very high spatial resolution, so it was effective in reading and analyzing topographic features. Second, an area with a large number of aerial images and a complex topography had a large amount of point clouds to be extracted, and the number of point clouds affects the three-dimensional quality of rural space. Third, 3D mapping technology using point cloud is effective for monitoring rural space and rural resources because it enables observation and comparison of parts that cannot be read from general aerial images. In this study, the possibility of rural space analysis of low-altitude UAV was verified through aerial photography and analysis, and the effect of 3D mapping on rural space monitoring was visually analyzed. If data acquired by low-altitude UAV are used in various forms such as GIS analysis and topographic map production it is expected to be used as basic data for rural planning to maintain and preserve the rural environment.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.485-487
• /
• 2009

The Spatial Image contents of Geomorphology 3-D environment is focused by the requirement and importance in the fields such as, national land development plan, telecommunication facility management, railway construction, general construction engineering, Ubiquitous city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. This As the results, We confirmed the solutions of varieties application for railway facilities management using 3-D spatial image contents and database design. Also, I suggested that U-city using topographical modeling about matching methods of high density elevation value using 3-D aerial photo with laser data are best approach for detail stereo modeling and simulation.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.55-62
• /
• 2010

Human visual attention system has a remarkable ability to interpret complex scenes with the ease and simplicity by selecting or focusing on a small region of visual field without scanning the whole images. In this paper, a novel feature map generation and integration method for attention based visual information processing system is proposed. The depth information obtained from a stereo pair of images is exploited as one of spatial visual features to form a set of topographic feature maps in our approach. Comparative experiments show that correct detection rate of visual attention regions improves by utilizing depth feature compared to the case of not using depth feature.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.2
• /
• pp.75-88
• /
• 2017

This study analyzed wind flows based on spatial and geomorphological characteristics of Daegu Metropolitan City. A three-stage analysis was performed, starting with a comparison of meteorological relationships between local wind direction (synoptic wind) and local wind flow. In the second stage the study area was subdivided into districts and suburban districts to analyze the relative change of local wind flow. In stage three, the formation of wind corridor for local wind flow, wind flow for the entire urban space, and spatial relationships between flows were verified comparatively using KLAM_21. Three results are notable, the first of which is a low correlation between synoptic wind of a region, and local wind, flow in terms of meteorology. Secondly, observations of local wind flow at five downtown districts and two suburban districts showed that there were diverse wind directions at each measurement point. This indicates that the spatial and geomorphological characteristics of areas neighboring the measurement points could affect the local wind flow. Thirdly, verifying the results analyzed using KLAM_21, compared to Atomatic Weather System(AWS) measurement data, confirmed the reliability of the numerical modelling analysis. It was determined that local wind flow in a city performs a spatial function and role in ameliorating the urban heat island phenomena. This indicates that, when an urban planning project is designed, the urban heat island phenomena could be ameliorated effectively and sustainably if local wind flow caused by immediate spatial and geomorphological characteristics is confirmed systematically and techniques are intentionally applied to connect the flows spatially within areas where urban heat islands occur.

• Korean Journal of Remote Sensing
• /
• v.22 no.4
• /
• pp.243-253
• /
• 2006

As the ocean and beaches have suffered from the losses of sand, it is necessary to monitor the zones that are prone to erosion continuously with the object of the long-term management. However, each ward offices are busy trying to supply sand without analyzing the marine and beach topographic changes. Therefore a long term effect of erosion has not been shown. In this study, we proposed methods to collect accurate spatial data of the oceans and beaches through sounding and GPS surveys, and detected and analyzed topographic changes quantitatively and qualitatively, by using an integrated RS and GIS techniques. The result of this study revealed that the marine topography has been eroded for 25 years, because of the straight construction of the river and the vast development of urban features, in addition with change of the mean depth 0.40 m, the water surface area 11,028 $m^2$, and submarine volume 2,207,884 $m^3$. The beach topography has accreted for 5 years and the change of the mean elevation is 0.27m, the area 6,501 $m^2$, and volume 25,667 $m^3$, because of the installation of geogrids and the seasonal effect. We conducted monitoring works on the topographic survey of the ocean and beaches and analyzed the present condition of the coastal erosions. Therefore, it is estimated that necessary information on the supply of sand, the safe marine leisure and the management of bating place could be provided.

• Journal of Korean Society of Rural Planning
• /
• v.10 no.2 s.23
• /
• pp.35-42
• /
• 2004

This study aimed at establishing the multi-ranged approach on data acquisition technique for rural landscape planning, which tried categorization, grading and transferring of landscape elements in the more detailed level. For the systematic management of database for the topographic informations in the village level, a kind of the aerial photographing techniques with UAV(Unmanned Aerial Vehicle) was used and its resultant data for the landscape simulation of the rural village, which in turn helped the convenient approach to understanding of its comprehensive spatial structure. The image data from aerial photography was systematically processed through; First, after revision of the distorted one, the image map was adjusted with the topographical and cadastral maps. Second, the farm houses and buildings, and other facilities difficult to find out in the topographical map was digitally read from the adjusted image. The topographical landscape view of rural village was simulated on the base of DEM(Digital Elevation Model) and the 3-dimensional shapes of farm houses and buildings were automatically modelled using the input system developed by the author. In conclusion, the aerial image information adjusted with the edited maps could give more intuitive and detailed villagescape than the ordinary one and through landscape simulation of the rural village, its topography, features of houses/buildings and spatial distribution of land uses were effectively reproduced. And, by the linkage between field survey and photographed/simulated results of the typical landscape elements using hyper-link method, it would be expected to develop as an effective visualization technique of rural landscape.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.99-105
• /
• 2010

Photovoltaic system is the core one among the new and renewable energy of the low Carbon and green growth. Recently, the necessity developing PV is emerging since its of less green hose gas emissions. However, a survey or research on the PV system has been hardly performed. It's not easy to find a appropriate location in consideration of environment. These circumstances encourages a systematic approach for the PV system development. The purpose of this study is to propose a methodology of the location analysis for developing PV system. With this, constraint and location criteria with weights of Analytic Hierarchy Process are established and quantification method of each factor is presented. The location analysis of PV system using the GIS were generalized and the results of analysis for redundant topographic features were presented as 3 criteria of the suitability rank.

• Journal of the Korean association of regional geographers
• /
• v.5 no.1
• /
• pp.1-24
• /
• 1999

This is a study on village names in a plain region of Changnyeong-Gun, a mountain region of Bonghwa-Gun and an island region of Namhae-Gun. The three regions differ in geographical features. The data are based on 455 village names in Changnyeong-Gun, 552 village names in Bonghwa-Gun and 275 village names in Namhae-Gun found in the 1 : 50,000 topographic map. The method of this study is to analyze the word structures of village names in the five basic concepts in geography : Man-Land(Natural Environment and Human Activities). Spatial Relation, Distribution, Region and Transition. The main results of this study are as follows: 1. Naming of villages are related to Natural Environment(41%), Human Activities(23%), Region(17%), Spatial Relation(13%), Distribution(5%), and Transition(3%). Of these six factors, Changnyeong-Gun is relatively dominant in village names related to Spatial Relations, Region and Transition ; Bonghwa-Gun Natural Environment and Namhae-Gun Human Activities and Spatial Relations. But the three Guns are absolutely dominant in village names related to Natural Environment and Human Activities. 2. A village name is divided into the specific name part(given name) and the generic name part(classified name). Names related to Human Activities, Spatial Relations, Distribution and Transition are more frequently found in the specific name part. Therefore, they are used as the given name of a village name. Whereas names related to Natural Environment and Region are more frequently found in generic name part, which means that they are used as the classified name of a village. 3. The word structure of a village name usually has two parts a frontal part(given name) and a rear part(classified name). The two parts have a particular pattern in the geographic concept when they are combined. 1) In the village names related to in their frontal part of the word structure, is more frequently combined as their rear part in Bonghwa-Gun, in Namhae-Gun and in Changnyeong-Gun. 2) In the village names related to in their frontal part of the word structure, is more frequently combined as their rear part in Changnyeong-Gun, in Namhae-Gun and in Bonghwa-Gun. Accordingly, Man(Human Activities) - Land (Natural Environment) can be considered the most important concept in the naming of villages, because the concept is most frequently used in the word structures of village names.