• 제목/요약/키워드: Source Mismatch

검색결과 71건 처리시간 0.025초

이상 신호왜곡과 소스 불일치에 강인한 벡터 양자화 방법 (A Robust Vector Quantization Method against Distortion Outlier and Source Mismatch)

  • 노명훈;김무영
    • 대한전자공학회논문지SP
    • /
    • 제49권3호
    • /
    • pp.74-80
    • /
    • 2012
  • 고정 비트율을 사용하는 resolution-constrained quantization 방식은 입력 데이터 분포에 따라 보로노이 셀의 크기가 달라지므로 이상 신호왜곡 (distortion outliers)을 발생시킨다. 본 논문에서는 generalized Lloyd algorithm (GLA)과 cell-size constrained vector quantization (CCVQ) 방식을 결합하여 이상 신호왜곡을 줄이는 벡터 양자화 방식을 제안한다. 즉, 왜곡에 대한 문턱 값에 따라서 데이터 분포를 내부와 외부영역으로 나누고, 각각 CCVQ와 GLA 방식을 사용하여 학습하도록 한다. 데이터 분포가 높은 내부영역에 CCVQ 방식을 사용하게 됨에 따라 GLA를 사용하는 외부영역에서 사용이 가능한 셀의 개수가 늘어나게 되며, 이로 인해 이상 신호왜곡을 줄일 수 있었다. 또한, 실제 코딩 환경에서는 일반적으로 training과 test 데이터의 분포가 다르게 나타나는 소스 불일치 (source mismatch) 문제가 발생하게 된다. 제안하는 방식은 source mismatch 문제로 인해 일어나는 신호왜곡과 이상 신호왜곡에 대해서도 성능 개선을 가능하게 하였다.

Near-Infrared Light Propagation in an Adult Head Model with Refractive Index Mismatch

  • Kim, Seung-Hwan;Lee, Jae-Hoon
    • ETRI Journal
    • /
    • 제27권4호
    • /
    • pp.377-384
    • /
    • 2005
  • We investigate near-infrared light (NIR) propagation in a model of an adult head using an extensive Monte Carlo (MC) simulation. The adult head model is a four-layered slab which consists of a surface layer, a cerebrospinal fluid layer, a gray-matter layer, and a white-matter layer. We study the effects of a refractive index mismatch on the model, calculating the intensity of detected light, mean flight time, and partial mean flight time of each layer for various refractive indices of the cerebrospinal fluid layer as functions of source-detector spacing. The Monte Carlo simulation shows that the refractive index mismatch presents very rich results including rapidly decaying intensity of detected light and a peak and cross-over in the partial mean flight time with source-detector spacing. We also investigate spatial sensitivity profiles at various source-detector spacings, discussing the index mismatch effect on the model.

  • PDF

해양 정합장처리에서 매개변수 오정합과 바이어스 (Parameter Mismatches and its Biases in Ocean Matched Field Processing)

  • 박재은;김재수;신기철
    • 한국음향학회지
    • /
    • 제24권2호
    • /
    • pp.87-96
    • /
    • 2005
  • 해양환경에서 정합장처리를 통해 음원위치를 추정할 경우 실측신호의 음장과 복제음장 사이에 각종 매개변수의 오정합이 발생하여 상관값의 저하와 함께 음원 위치추정 결과에 바이어스를 발생시킨다. 본 논문에서는 정합장처리를 이용한 음원 위치추정에서 해양환경 및 시스템 오정합 매개변수로 인한 바이어스와 상관값의 변화 그리고 민감도에 대해서 고찰하였다. 이를 위해 Pekeris 해양 도파관에서 수치실험을 수행하였으며, 그 결과 매개변수 오정합이 음원 위치에서의 바이어스와 상관값의 감소를 발생시켰다. 또한 매개변수 민감도 평가를 통해 배열의 경사와 수심, 해저면 수심과 해저층의 음속이 민감도가 높음을 확인 할 수 있었다.

신호원 거리 부정합에 대한 로버스트 빔형성기 (Robust Beamformer to Source Range Mismatch)

  • 윤원식
    • 한국음향학회지
    • /
    • 제14권4호
    • /
    • pp.96-99
    • /
    • 1995
  • 신호원 거리 부정합시 linearly constrained minimum variance (LCMV) 빔형성기는 원하는 신호를 제거해 버리는 성능 저하를 나타내게 된다. 어레이 공분산 행렬의 eigenstructure 성질을 이용하여 이 문제에 대한 원인 조사를 행한다. 이 원인 규명으로부터 신호원 거리 부정합에 로버스트한 빔형성기를 제안한다. 제안한 빔형성기는 최대 출력 신호 대 답음비를 나타낸다. 신호원이 far field에 있을 시 빔형성기의 weight vector는 bias되지 않는다.

  • PDF

조직의 정보 니즈와 ERP 기능과의 불일치 및 그 대응책에 대한 이해: 조직 메모리 이론을 바탕으로 (Understanding the Mismatch between ERP and Organizational Information Needs and Its Responses: A Study based on Organizational Memory Theory)

  • 정승렬;배억호
    • Asia pacific journal of information systems
    • /
    • 제22권2호
    • /
    • pp.21-38
    • /
    • 2012
  • Until recently, successful implementation of ERP systems has been a popular topic among ERP researchers, who have attempted to identify its various contributing factors. None of these efforts, however, explicitly recognize the need to identify disparities that can exist between organizational information requirements and ERP systems. Since ERP systems are in fact "packages" -that is, software programs developed by independent software vendors for sale to organizations that use them-they are designed to meet the general needs of numerous organizations, rather than the unique needs of a particular organization, as is the case with custom-developed software. By adopting standard packages, organizations can substantially reduce many of the potential implementation risks commonly associated with custom-developed software. However, it is also true that the nature of the package itself could be a risk factor as the features and functions of the ERP systems may not completely comply with a particular organization's informational requirements. In this study, based on the organizational memory mismatch perspective that was derived from organizational memory theory and cognitive dissonance theory, we define the nature of disparities, which we call "mismatches," and propose that the mismatch between organizational information requirements and ERP systems is one of the primary determinants in the successful implementation of ERP systems. Furthermore, we suggest that customization efforts as a coping strategy for mismatches can play a significant role in increasing the possibilities of success. In order to examine the contention we propose in this study, we employed a survey-based field study of ERP project team members, resulting in a total of 77 responses. The results of this study show that, as anticipated from the organizational memory mismatch perspective, the mismatch between organizational information requirements and ERP systems makes a significantly negative impact on the implementation success of ERP systems. This finding confirms our hypothesis that the more mismatch there is, the more difficult successful ERP implementation is, and thus requires more attention to be drawn to mismatch as a major failure source in ERP implementation. This study also found that as a coping strategy on mismatch, the effects of customization are significant. In other words, utilizing the appropriate customization method could lead to the implementation success of ERP systems. This is somewhat interesting because it runs counter to the argument of some literature and ERP vendors that minimized customization (or even the lack thereof) is required for successful ERP implementation. In many ERP projects, there is a tendency among ERP developers to adopt default ERP functions without any customization, adhering to the slogan of "the introduction of best practices." However, this study asserts that we cannot expect successful implementation if we don't attempt to customize ERP systems when mismatches exist. For a more detailed analysis, we identified three types of mismatches-Non-ERP, Non-Procedure, and Hybrid. Among these, only Non-ERP mismatches (a situation in which ERP systems cannot support the existing information needs that are currently fulfilled) were found to have a direct influence on the implementation of ERP systems. Neither Non-Procedure nor Hybrid mismatches were found to have significant impact in the ERP context. These findings provide meaningful insights since they could serve as the basis for discussing how the ERP implementation process should be defined and what activities should be included in the implementation process. They show that ERP developers may not want to include organizational (or business processes) changes in the implementation process, suggesting that doing so could lead to failed implementation. And in fact, this suggestion eventually turned out to be true when we found that the application of process customization led to higher possibilities of failure. From these discussions, we are convinced that Non-ERP is the only type of mismatch we need to focus on during the implementation process, implying that organizational changes must be made before, rather than during, the implementation process. Finally, this study found that among the various customization approaches, bolt-on development methods in particular seemed to have significantly positive effects. Interestingly again, this finding is not in the same line of thought as that of the vendors in the ERP industry. The vendors' recommendations are to apply as many best practices as possible, thereby resulting in the minimization of customization and utilization of bolt-on development methods. They particularly advise against changing the source code and rather recommend employing, when necessary, the method of programming additional software code using the computer language of the vendor. As previously stated, however, our study found active customization, especially bolt-on development methods, to have positive effects on ERP, and found source code changes in particular to have the most significant effects. Moreover, our study found programming additional software to be ineffective, suggesting there is much difference between ERP developers and vendors in viewpoints and strategies toward ERP customization. In summary, mismatches are inherent in the ERP implementation context and play an important role in determining its success. Considering the significance of mismatches, this study proposes a new model for successful ERP implementation, developed from the organizational memory mismatch perspective, and provides many insights by empirically confirming the model's usefulness.

  • PDF

CMOS X-Ray 검출기를 위한 위상 고정 루프의 전하 펌프 회로 (A Charge Pump Circuit in a Phase Locked Loop for a CMOS X-Ray Detector)

  • 황준섭;이용만;천지민
    • 한국정보전자통신기술학회논문지
    • /
    • 제13권5호
    • /
    • pp.359-369
    • /
    • 2020
  • 본 논문에서는 CMOS X-Ray 검출기의 메인 클럭을 발생시키는 위상 고정 루프(phase locked loop, PLL)을 위한 전류 불일치를 줄이면서도 넓은 동작 범위를 가지는 전하 펌프(charge pump, CP) 회로를 제안하였다. CP 회로의 동작 범위와 전류 불일치는 CP 회로를 구성하는 전류원 회로의 동작 범위와 출력 저항에 의해서 결정된다. 제안된 CP 회로는 넓은 동작 범위를 확보하기 위한 wide operating 전류 복사 바이어스 회로와 전류 불일치를 줄이기 위한 출력 저항이 큰 캐스코드 구조의 전류원으로 구현하였다. 제안된 wide operating range 캐스코드 CP 회로는 350nm CMOS 공정을 이용하여 칩으로 제작되었으며 소스 측정 장치(source measurement unit)을 활용하여 전류 일치 특성을 측정하였다. 이때 전원 전압은 3.3V이고 CP 회로의 전류 ICP=100㎂이었다. 제안된 CP 회로의 동작 범위 △VO_Swing=2.7V이고 이때 최대 전류 불일치는 5.15%이고 최대 전류 편차는 2.64%로 측정되었다. 제안된 CP 회로는 낮은 전류 불일치 특성을 가지면서 광대역 주파수 범위에 대응할 수 있으므로 다양한 클럭 속도가 필요한 시스템에 적용할 수 있다.

다극자 송신원들 사이의 불일치가 LWD 자료에 미치는 영향 (Effects on Logging-While-Drilling (LWD) data of mismatch between multipole sources)

  • 변중무;주용환
    • 지구물리와물리탐사
    • /
    • 제12권1호
    • /
    • pp.143-153
    • /
    • 2009
  • LWD 다극자 송신원을 구성하는 각 단극자 송신원들 사이에 진폭 또는 신호발생 시간에서 불일치가 발생할 경우 LWD 검층자료에 미치는 영향에 대해 이산파수법을 사용하여 조사하였다. 진폭-불일치 LWD 쌍극자/사극자 송신원은 굽힘 모드(flexural mode)/스크류 모드(screw mode) 이외에도 다른 모드들을 생성한다. 이들 중 가장 진폭이 큰 것은 스톤리 모드(Stoneley mode)이며 불일치 정도가 커질수록 진폭이 증가한다. 하지만 A-C 자료처리를 통해 굽힘 모드를 A-B+C-D 자료처리를 통해 스크류 모드를 각각 추출할 수 있다. 이는 LWD 검층기가 시추공의 중심에 위치해 있는 한 시추공축으로부터 같은 거리에서 같은 진폭을 갖는 스톤리 모드가 A-C와 A-B+C-D 자료처리 과정을 통해 제거되기 때문이다. 신호발생시간-불일치 LWD 다극자 송신원으로부터의 반응들은 마치 시추공 중심으로부터 벗어나서 위치한 두 개 또는 네 개의 단극자 송신원들로부터의 반응들의 합처럼 보인다. 그러나 모드들의 도착시간들과는 무관한 주파수영역 셈블란스 플랏(semblance plot)의 분산곡선들을 참조하면 매질의 속도에 대한 잘못된 해석을 피할 수 있다.

구형 음향 홀로그래피에서 측정위치 부정확성에 의한 음압 추정 오차의 정량화 (Quantification of Acoustic Pressure Estimation Error due to Sensor Position Mismatch in Spherical Acoustic Holography)

  • 이승하;김양한
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 추계학술대회논문집
    • /
    • pp.1325-1328
    • /
    • 2007
  • When we visualize the sound field radiated from a spherical sound source, spherical acoustic holography is proper among acoustic holography methods. However, there are measurement errors due to sensor position mismatch, sensor mismatch, directivity of sensor, and background noise. These errors are amplified if one predicts the pressures close to the sources: backward prediction. The goal of this paper is to quantitatively examine the effects of the error due to sensor position mismatch on acoustic pressure estimation. This paper deals with the cases of which the measurement deviations are distributed irregularly on the hologram plane. In such cases, one can assume that the measurement is a sample of many measurement events, and the cause of the measurement error is white noise on the hologram plane. Then the bias and random error are derived mathematically. In the results, it is found that the random error is important in the backward prediction. The relationship between the random error amplification ratio and the measurement parameters is derived quantitatively in terms of their energies.

  • PDF

동해 환경에서 차주파수 곱 및 수평선배열을 이용한 음원 위치추정 특성 (Characteristics of source localization with horizontal line array using frequency-difference autoproduct in the East Sea environment)

  • 박정수;박중용;손수욱;배호석;이근화
    • 한국음향학회지
    • /
    • 제43권1호
    • /
    • pp.29-38
    • /
    • 2024
  • 정합장처리(Matched Field Processing, MFP)는 음파전달 예측을 기반으로 음원의 거리와 심도를 추정하는 기법이다. 그러나 주파수가 높아지면 음파전달 예측의 부정확성이 증가하여 음원위치 추정이 어렵다. 최근에 제안된 차주파수 정합장처리(Frequency-difference Matched Field Processing, FD-MFP)는 고주파 신호의 자기상관으로부터 추출한 차주파수 곱을 적용함으로써 음속의 오정합 등이 있어도 강인하다고 알려졌다. 본 논문에서는 수평선배열센서에서 차주파수 정합장처리의 성능을 알아보기 위하여, 동해의 환경에서 시뮬레이션을 수행하였다. 장거리 탐지가 가능한 해저면반사(Bottom Bounce, BB)와 수렴구역(Convergence Zone, CZ)이 발생하는 영역에서 위치추정 결과를 분석하였다. 수평선배열센서의 차주파수 정합장처리의 위치추정 정확도는 회절음장과 음속의 오정합에 의해 기존의 정합장처리에 비해 유사하거나 낮아졌다. 시뮬레이션으로부터 차주파수 정합장처리가 기존의 정합장처리보다 오정합에 강인하다는 명확한 결과는 볼 수 없었다.

실 해상 실험 데이터를 이용한 정합장 처리에서의 특성치 추출 기법 분석 (Matched Field Processing: Ocean Experimental Data Analysis Using Feature Extraction Method)

  • Kim Kyung Seop;Seong Woo Jae;Song Hee Chun
    • The Journal of the Acoustical Society of Korea
    • /
    • 제24권1E호
    • /
    • pp.21-27
    • /
    • 2005
  • Environmental mismatch has been one of important issues discussed in matched field processing for underwater source detection problem. To overcome this mismatch many algorithms professing robustness have been suggested. Feature extraction method (FEM) [Seong and Byun, IEEE Journal of Oceanic Engineering, 27(3), 642-652 (2002)] is one of robust matched field processing algorithms, which is based on the eigenvector estimation. Excluding eigenvectors of replica covariance matrix corresponding to large eigenvalues and forming an incoherent subspace of the replica field, the processor is formulated similarly to MUSIC algorithm. In this paper, by using the ocean experimental data, processing results of FEM and MVDR with white noise constraint (WNC) are presented for two levels of multi-tone source. Analysis of eigen-space of CSDM and FEM performance are also presented.