• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.4
• /
• pp.239-246
• /
• 2000

This paper investigates optimal locations of piezoelectric actuators and sensors on a thin plate. To locate actuators and sensors properly is important in controlling modal vibrations well. A piezoelectric sensitivity index is introduced to select optimal locations for vibration control of each mode. The sensitivity expresses the efficiency of actuating and sensing modal forces according to locations of a piezoelectric material on a plate. The piezoelectric sensitivities for two types of plate, an all-clamped plate, and a free-free plate, are derived theoretically and are verified experimentally. Also, its usefulness Is experimentally shown to control vibration of the all-clamped plate with piezoelectric materials.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.7
• /
• pp.659-666
• /
• 2012

A nonlinear dynamic model for the shaft-disk-blade unit is developed in this study. In this regard, the rotating flexible blade, with a pre-twist angle, attached to a rigid disk driven by a shaft which is flexible in torsion is developed. The rotor-blade coupled model is derived using Lagrange equation in conjunction with the assumed mode method to discretize the blade deformation. The equations of motion are analyzed based on the small deformation theory for the blade and shaft torsional deformation to obtain the system natural frequencies for various system parameters.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.6
• /
• pp.671-677
• /
• 2015

A novel phase interpolator (PI) based linear model of multipath ring oscillator (MPRO) is described in this paper. By modeling each delay cell as an ideal summer followed by a single pole RC filter, the oscillation frequency is derived for a 4-stage differential MPRO. It is analytically proved that the oscillation frequency increases with the growth of the forwarding factor ${\alpha}$, which is also confirmed quantitatively through simulation. Based on the proposed model, it is shown that the power to frequency ratio keeps constant as the speed increases. Running at the same speed, a 4-stage MPRO can outperform the corresponding single-stage ring oscillator (SPRO) with 27% power saving, making MPRO with a large forwarding factor ${\alpha}$ an attractive option for lower power applications.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.366-373
• /
• 2016

This paper proposes a pre-processing algorithm to improve the coding efficiency of perceptual video coding. First, an input image is decomposed into multiple sub-bands through linear sub-band decomposition. Then, the sub-bands that have low visual sensitivity are suppressed by assigning small gains to them. Experimental results show that if the proposed algorithm is adopted for pre-processing in a High Efficiency Video Coding (HEVC) encoder, it can provide significant bit-saving effects of approximately 12% in low delay mode and 9.4% in random access mode.

• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.163-171
• /
• 2006

To evaluate inelastic seismic responses of multi-span-bridge, the equivalent single-degree-of-freedom (ESDOF) methods and the lateral load distributions are applied to the capacity spectrum method(CSM). From the pushover analysis results using the four ESDOF methods and the six types lateral load distributions, the ESDOF method more than lateral load distribution is found to have an important influence upon the pushover analysis. The effects of the higher mode on the bridge seismic behaviors are also increased as the number of pier increase. Therefore, it can be concluded that lateral load distributions and ESDOF methods for reflection of higher mode effects should be considered in the seismic analysis of the bridge structural.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.86-90
• /
• 2002

In this paper, traction system for urban transit maglev system is proposed. Using vector control strategy to control magnitude and frequency of output voltage transiently is general. But in case of traction system for railway vehicle, it is impossible that adapt vector control because there is one-pulse mode in a high speed region. So this paper proposes the control strategy using vector control in a low speed region and slip frequency control in a high speed region. And also proposes overmodulation method that makesto change in one-pulse mode softly. The performance of traction system will be verified by simulation results using ACSL.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.367-371
• /
• 1990

The photovoltaic inverter is a system which transforms the solar energy to the electrical energy. Because the output of photovoltaic inverter depends on solar radiation, it is necessary to save generated power or to interface with utility line. This paper describes a 2KVA photovoltaic inverter utilizing IGBT, designed to have a very high efficiency in stand alone mode and to have the function synchronizing the phase between inverter and utility voltage as a fundamental study for utility interactive mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.968-974
• /
• 2009

In this paper, we present a skipping method of transformation and quantization process using skip blocks estimation in fast H.264 video encoder. In order to reduce the complexity, we estimate skip mode blocks using integer discrete cosine transform and quantization and a skipping condition is derived by the analysis of those processes. The experimental result show that the proposed algorithm has effective estimations.

• Journal of Powder Materials
• /
• v.11 no.5
• /
• pp.369-375
• /
• 2004

A new concept of tungsten heavy alloy composite was suggested and manufactured in this study for the kinetic energy penetrator. The composite heavy alloy was composed of two parts, the center was molybdenum added heavy alloy compositions which were designed to promote the self-sharpening effect and outside was conventional heavy alloy in order to sustain the severe stress condition in the muzzle during the firing. The center part showed an intergranular and brittle mode at tungsten/tungsten interfaces by which self-sharpening effect could be activated. On the other hand, that of outside showed conventional ductile fracture mode under high strain rate condition. From the sub-scale penetration test, the depth of penetration in heavy alloy composites showed greater values than those of conventional tungsten heavy alloys. It is suggested that the heavy alloy composite could be considered as one of the future penetrator materials.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.340-342
• /
• 2005

A sliding mode controller for the grid-connected photovoltaic system has been presented. This controller is constructed from the time-varying sliding surface In order to control the sinusoidal inductor current and solar array power simultaneously. The proposed controller can achieve the tight regulation of current and power under the parameter variation environment.