• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.1-12
• /
• 2005

Policies regarding to soil quality of the United States, the United Kingdom, the Netherlands, Germany, and Demark were analyzed to suggest Korean policy for improving soil quality concept and it's implementation. All countries met four criteria: I) Soil quality levels of contaminants are indebt to concept of contaminant risk to recipients (human and ecosystem); ii) Any soil quality value can't be a magic number to determine whether a site is contaminated or not. To determine risk of sites, risk assessment of the sites should be followed; iii) Concentrations of contaminants of sites are not always significantly certain to risk of human and ecosystem of the sites; and iv) Soil quality levels are adopted based on land uses and plans. Considering our rooms to improve policies and analysis of the other country reports on their legislations about soil quality levels, our policy implementation could be approached from these directions: i) Our concept for soil quality levels needs to develop in scientific and rational. ii) Soil quality levels and risk assessment should be implemented as determining tools of site contamination in parallel, and iii) Soil quality levels depending on land uses and plans should be developed in debt with rational and scientific concept of risk. Increasing efficacy of Korea policy regarding the soil quality levels would be in dept to applying concepts of SCL (Soil Contamination Level) and SRL (Soil Regulatory Level) developed, implementing soil quality levels and risk assessment of contaminated sites in conjunction, and classifying three distinctions of land uses based on sensitiveness of recipients (human and ecosystem) to contaminants in soil in this research.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.119-128
• /
• 2008

Laboratory analytical results of 22 sets of hydrophobic adsorbent coils containing surface soil-vapor and two soil samples collected by conventional intrusive method from each boring location at two active dry cleaning facilities in the State of Illinois, U.S.A, were presented to evaluate the performance of soil-vapor survey. The most critical factor to determine the effectiveness of soil-vapor survey is the distance from the soil-vapor sampling device to the actual contamination, which is a function of soil porosity, permeability, primary lithology, and other geological and hydrogeological site-specific parameters. Also this factor can be affected by the history of contaminant-generating operations. The laboratory analytical results in this study showed longer dry cleaning operation history (i.e., 50 years) and presence of fine sand at the beneath Site B allow the contaminants to migrate farther and deeper over a fixed time compared to Site A(i.e., 35 years and silty clay) so that the soil-vapor survey is not likely the most effective environmental site investigation method alone for Site B. However, for Site A, the soil-vapor survey successfully screened the site to identify the location reporting the highest soil concentration of chlorinated solvents.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.183-185
• /
• 2004

In this study, the combined electrokinetic and ultrasonic remediation technique, ultrasonically enhanced electrokinetic technique, was studied for the removal of heavy metal and organic substance in contaminated soils. The electrokinetic technique has been applied to remove mainly the heavy metal and the ultrasonic technique has been to remove mainly organic substance in contaminated soil. The laboratory soil flushing tests combined electrokinetic and ultrasonic technique were conducted using specially designed and fabricated devices to determine the effect of these both techniques. A series of laboratory experiments involving the simple, electrokinetic, ultrasonic, and electrokinetic & ultrasonic flushing test were carried out. A soil admixed with sand and kaolin was used as a test specimen, and Pb and ethylene glycol were used as contaminants of heavy metal and organic substance. An increase in out flow, permeability and contaminant removal rate was observed in electrokinetic and ultrasonic flushing tests. Some practical implications of these results are discussed in terms of technical feasibility of in situ implementation of electrokinetic ultrasonic remediation technique.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.111-114
• /
• 2001

Thermal desorption process is valuable for the remediation of oil contaminated site. The system is physical separation process by volatizing oil contaminants from soil matrixes and is not designed to provide high levels of oil destruction. The process is not incineration, because the decomposition of oil materials is not the desired result, although some decomposition may occur. The physical and chemical properties that influence the design and operation of the system include boiling points, soil sorption characteristics, aqueous phase solubility, thermal stability, contaminating oil concentration, moisture contents, particle size distribution and etc.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.61-64
• /
• 2001

In the remediation of contaminated soil by electrokinetic process, transport characteristics of contaminants are major factors. Pb is highly fixed to entire soil and not moved readily. High concentration of Cd was analyzed in the cathodic section but anodic section's concentration was lower than initial concentration. Although the Cd had high treatment effect, 50% of total mass was concentrated in cathodic section and was not flowed out readily. Most of transported Cd may be adsorbed in the cathodic side soil due to increased pH at adjacent to catholyte.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.16-19
• /
• 2006

Humin is the insoluble fraction of humic materials and play an important roles in the irreversible sorption of hydrophobic organic contaminants onto soil particles. However, there have been limited knowledge about the sorption and chemical properties of humin due to the difficulties in its separation from the inorganic matrix(mainly clays and oxides). In this study, do-ashed humin was isolated from a soil sample after removing free lipid and alkali-soluble humic fractions followed by dissolution of mineral matrix with 2% HF, and characterized by elemental analysis, C-13 NMR spectroscopic method. Sorption behavior of 1-naphthol with humin was also investigated from aqueous solution. C-13 NMR spectra indicate that humin molecules are mainly made up of aliphatic carbon including carbohydrate, methylene chain etc.. Sorption intensity for 1-naphthol was increased as organic carbon content of humin increased and log Koc values for the 1-naphthol sorption were determined to be ${\sim}3.12$

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.115-119
• /
• 2003

Pollutants from industry, mining, agriculture, and other sources have contaminated sediments in many surface water bodies. Sediment contamination poses a severe threat to human health and environment because many toxic contaminants that are barely detectable in the water body can accumulate in sediment at much higher levels, the purpose of this study was to make convenient sampling method and optimal treatment of sediment for water quality improvement in reservoir or stream based on an evaluation of degree of contamination. Results for analysis of S-reservoir sediments were observed that copper concentration of almost areas were higher than the regulation of soil pollution (50 mg/1) for the riverbed. S-stream sediments were observed that copper, arsenic and TPH concentration of almost areas were exceeded soil pollution concerning levels for factorial areas. We used Remscreen(version. 1.0) program which is contaminated soil recovery program to select optimal treatment method of contaminant sediments. The result was shown in the order of Thermal Calcination > Excavation, Retrieval and Off-site Disposal(comparative less then contaminant) > Low Temperature Thermal Desorption + Solidification/Stabilization.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2002.11a
• /
• pp.119-122
• /
• 2002

Soil contaminants are common in industrialized sites, They can affect directly soil and indirectly ground water and food. Soil mutagens and carcinogens are of great interest due to their potentially hazardous effects on human health. The aim of this study was to monitor the genotoxicity of contaminated soils, Soil leachates were collected from two polluted sites and one control site in Cheongju. Tradescantia BNL 4430 clone was used as experimental matierials. Chromosomal damages induced by soil leachates were detected by the Tradescantia-micronucleus assay. It is known from the result that Tradescantia-micronucleus assay is an excellent botanical tool for detection of biological risk due to environmental toxicants.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2015

The objectives of this study were to calculate the radius of influence (ROI) of well for an air-sparging (AS)/soil vapor extraction (SVE) system and to evaluate the applicability of the system applied for the remediation of the petroleum contaminated rail site. For air permeability test, three monitoring wells were installed at a location of 1.3 m, 2.3 m, 3.0 m from the extraction well. And the pressure of each monitoring well was measured by extracting air from the extraction well with the pressure and flow of $(-)2,600mmH_2O$ and $1.58m^3/min$. The ROI for an extraction well was calculated as 4.31 m. Air was injected into the injection well with the pressure and flow of $3,500mmH_2O$ and $0.6m^3/min$ to estimate the radius of influence for oxygen transfer. Oxygen concentrations of air from three monitoring wells were measured. The ROI of an injection well for oxygen transfer was calculated as 3.46 m. The 28 extraction wells and 19 injection wells were installed according to the ROI calculated. The AS/SVE system was operated eight hours a day for five months. The rail site was contaminated with the petroleum and concentrations of benzene, toluene, and xylene were over the 'Worrisome Standard' of the 'Soil Environment Conservation Act'. The contaminated area was estimated as $732m^2$ and contaminants were dispersed up to (-)3 m from the ground. During the operation period, soil samples were collected from 5 points and analyzed periodically. With the AS/SVE system operation, concentrations of benzene, toluene, and xylene were decreased from 7.5 mg/kg to 2.0 mg/kg, from 32.0 mg/kg to 23.0 mg/kg, from 35.5 mg/kg to 23.0 mg/kg, respectively. The combined AS/SVE system applied to the rail site contaminated with volatile organic compounds (VOCs) exhibited a high applicability. But the concentration of contaminants in soil were fluctuated due to the heterogeneous of soil condition. Also the effect of the remediation mechanisms was not clearly identified.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.29-37
• /
• 2006

In remediation of the contaminated soil, it requires to select at least more than two remediation technologies depending on the fate and transport phenomena through complicated reactions in soil matrix. Therefore, methodologies related to develop the integrated remediation technology were reviewed for agricultural soils contaminated with heavy metals. Pneumatic fracturing is necessary to implement deficiency because soil washing is not effective to remove heavy metals in the subsurface soil. But it needs to evaluate the characteristics such as essential data and factors of designated technology in order to effectively apply them in the site. In the remediation site, the important soil physical and chemical factors to be considered are hydrology, porosity, soil texture and structure, types and concentrations of the contaminants, and fate and its transport properties. However, the integrated technology can be restrictive by advective flux in the area which remediation is highly effective although both soil washing and pneumatic fracturing were applied simultaneously in the site. Therefore, we need to understand flow pathways of the target contaminants in the subsurface soils, that includes kinetic desorption and flux, predictive simulation modeling, and complicated reaction in heterogenous soil.