• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.111-118
• /
• 2013

This paper presents implementation of Air protocol analyzer and physical layer design algorithm. The analyzer is a measurement system providing real-time analysis of wireless signals between User Equipment (UE) and Node-B. The implemented system proposed in this paper consists of Digital Signal Processors (DSPs) and Field Programmable Gate Arrays (FPGAs). The waveform of Wideband Code Division Multiple Access (WCDMA) has been selected for verification of the proposed system. We designed the analyzer using equalizer algorithm and rake-receiver algorithm. Among various algorithms of designing the equalizer, we have chosen Linear Minimum Mean Square Error (LMMSE) equalizer that uses the inverse of channel matrix. Since the LMMSE equalizer uses the inverse channel matrix, it suffers from a large amount of computational load, while it outperforms most conventional equalizers. In this paper, we introduce an efficient procedure of reducing the computational load required by LMMSE equalizer-based receiver.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.131-139
• /
• 2000

A design of CPS attitude determination system is described in this paper. The designed system is a low cost high precision 24 channel single frequency GPS(Global Positioning System) receiver which provides a precise absolute heading and pitch (or roll) as well as a position. It uses commercial chip-set and consists of two RF parts, two signal-tracking parts, a processor, memory parts and I/Os. In order to determine precise attitude, accurate carrier phase measurements and an efficient integer ambiguity resolution method are required. To meet these requirements, a PLL (Phase Locked Loops) is designed, and an algorithm called ARCE (Ambiguity Resolution with Constraint Equation) is adopted. The hardware and software structure of the system will be described, and the performance evaluated under various conditions will be presented. The test results will promise that more reliable navigation system be possible because the system provides all navigational information such as position, velocity, time and attitude.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.84-89
• /
• 2007

MIL-STD-461E, EMI military standard for the equipment and subsystems, requires reception characteristic tests to verify the susceptibility of a receiver against the jntermodulation and spurious signals. Because the CS103 and CS104 of MIL-STD-461E show the test configuration of the equipment unit like a traditional receiver, it is possible to verify the susceptibility only for the reception signal through analog filters. However, at present when software programming techniques make a progress, the CS103 and CS104 tests need to evaluate the reception signal of the subsystem which includes both the digital filtering effects and analog filter characteristics. These test and evaluation techniques applied to a surveillance radar subsystem. This paper researched the EMI test methods in order to confirm feasibility of these test and evaluation techniques. Also the test results are compared and analyzed.

• 한국항해학회지
• /
• 제24권1호
• /
• pp.57-64
• /
• 2000

In this paper, we developed the Realtime Ship Position Information System and the software in relation to the system, which consists of the on-board system and the shore-based system. The on-board system is composed a GPS receiver, a computer, and a modem. The shore-based system is composed of a telephone, a modem and a computer. Both systems are operated by the data communication program The system displays automatically the ship's movement on the digital chart by using the ship's position acquired by a GPS receiver via INMARSAT-A communication system. The results presented in many experiments indicate that the system in processing the position data well during the transmission and reception.

• Journal of Information Processing Systems
• /
• 제6권4호
• /
• pp.435-452
• /
• 2010

This paper proposes a novel reversible data hiding scheme based on a Vector Quantization (VQ) codebook. The proposed scheme uses the principle component analysis (PCA) algorithm to sort the codebook and to find two similar codewords of an image block. According to the secret to be embedded and the difference between those two similar codewords, the original image block is transformed into a difference number table. Finally, this table is compressed by entropy coding and sent to the receiver. The experimental results demonstrate that the proposed scheme can achieve greater hiding capacity, about five bits per index, with an acceptable bit rate. At the receiver end, after the compressed code has been decoded, the image can be recovered to a VQ compressed image.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.257-261
• /
• 2008

The Digital Radio Mondiale (DRM) system is a digital broadcasting standard designed for use in the LF, MF and HF bands of the broadcasting bands below 30 MHz. The system provides both superior audio quality and improved user services / operability compared with existing AM transmissions. In this paper, we propose a variable point Prime Factor FFT design method for Digital Radio Mondiale (DRM) system. Proposed method processes a various size IFFT/FFT of Robustness Mode on DRM standard efficiently by composing Radix-Prime Factor FFT Processing Unit of form similar to Radix-4 by insertion of a variable Prime Factor Twiddle Factor and Garbage data. So, we improved limitation that cannot process 112/176/256/288 FFT of each mode of DRM system with a existent Radix Processor and increase memory size and memory access time for IFFT/FFT processing by software processing in case of implementation with a existent high speed DSP.

• 한국군사과학기술학회지
• /
• 제6권1호
• /
• pp.49-58
• /
• 2003

Compared with generic GPS receiver, post-processing software GPS receiver has many advantages for high dynamic vehicle tracking. It has the advantage of the application of various tracking algorithms and aiding schemes. The post-processing system observes the carrier phase measurement data from the recorded GPS signals, detects and isolates the cycle slip. The observed carrier phase data and the raw data of the reference station are processed by carrier phase DGPS scheme. And the integer ambiguity resolution algorithm is used for resolving single frequency carrier phase ambiguity. The results of static and real flight test are presented and show that the proposed GPS translator processing system satisfies submeter accuracy.

• Journal of Information Technology Applications and Management
• /
• 제9권3호
• /
• pp.113-127
• /
• 2002

The effort for software process improvement is lately surging its interest though it does not satisfy both developer and receiver In terms of low productivity, quality, delay and increasing cost. According to current research, software process improvement contributes to improvement of productivity, its Duality, reduction of development time and cost, and the prediction of the time limit for delivery, which means software process improvement affects competitive advantage among developers. The latest research is whether the investment for information technology substantially had effect on improvement of productivity. That is, software process improvement and maturity of software industries has influence upon economic efficiency and as a result, it plays an important role in whole industries. This research is that how does software process improvement using CMM (Capability Maturity Model) and SPICE (Software Process Improvement and Capability dEtermination) have a effect on factors of software engineering, and how does it have influence upon competitive advantage among SI firms. For this research, reusability, customizability, participation, and review & inspection are set to independent variable and process flexibility and process predictability are set to mediate Variable. Finally, competitive advantage among SI firms Is set to dependent variable. The targets for survey are laborers who work for SI firms. The result of this research is as follows: 1 ) Reusability, Customizability and participation is not rejected but review and Inspection is rejected in process flexibility which has significant level 0.05. 2) Reusability, Customizability and participation is not rejected but review and inspection Is rejected in process predictability which has significant level 0.05. 3) Process flexibility is not rejected and process predictability Is rejected in the competitive advantage of 51 industries which has significant level 0.05

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.778-804
• /
• 2017

Software today has become an inseparable part of our life. In order to achieve the ever demanding needs of customers, it has to rapidly evolve and include a number of changes. In this paper, our aim is to study the relationship of object oriented metrics with change proneness attribute of a class. Prediction models based on this study can help us in identifying change prone classes of a software. We can then focus our efforts on these change prone classes during testing to yield a better quality software. Previously, researchers have used statistical methods for predicting change prone classes. But machine learning methods are rarely used for identification of change prone classes. In our study, we evaluate and compare the performances of ten machine learning methods with the statistical method. This evaluation is based on two open source software systems developed in Java language. We also validated the developed prediction models using other software data set in the same domain (3D modelling). The performance of the predicted models was evaluated using receiver operating characteristic analysis. The results indicate that the machine learning methods are at par with the statistical method for prediction of change prone classes. Another analysis showed that the models constructed for a software can also be used to predict change prone nature of classes of another software in the same domain. This study would help developers in performing effective regression testing at low cost and effort. It will also help the developers to design an effective model that results in less change prone classes, hence better maintenance.

• 한국항행학회논문지
• /
• 제13권3호
• /
• pp.311-318
• /
• 2009

본 논문에서는 GPS L1 신호와 Galileo E1/E5a 신호를 통합 처리하는 소프트웨어 수신 플랫폼 개발에 관한 연구를 설명한다. 급변하고 다양화 되는 GNSS시스템의 현 상황에서 소프트웨어 수신 플랫폼은 새로운 신호 처리에 대한 연구를 그 특성에 맞는 프로그램 수정만으로 가능하게 한다. 논문에서는 샘플링된 중간 주파수데이터로부터 MATLAB 툴을 이용하여 GPS L1 및 Galileo E1/E5a 신호를 통합적으로 처리하는 GPS/Galileo L1/E1/E5a 통합 수신 소프트웨어 플랫폼의 구조를 설명하고 구현된 플랫폼을 이용하여 데이터를 처리한 결과를 살펴본다. 구현된 프로그램은 기능과 역할에 따라서 모듈화 되었으며 각 모듈은 위성신호에 따라서 필요한 기능을 선택적으로 활용할 수 있도록 구성된다. 구현된 플랫폼은 GPS 신호의 경우 L1 C/A 코드를 이용한 항법해를 계산하고, Galileo E1/E5a 신호에 대해서는 항법 데이터를 추출하도록 구현되었다. GPS/Galileo 실제 위성의 신호 데이터를 이용하여 테스트 하였다.