• Journal of the Korean GEO-environmental Society
• /
• 제17권9호
• /
• pp.21-28
• /
• 2016

The purpose of this study is to compare the three areas that each estimated by using three different river topographic maps. For construction of river topographic maps, the data used in this study are ASTER, SRTM and a 1:5,000 scale digital map data sets in 14 streams of the Cheongdo-gun and Uiseong-gun. HEC-GeoRAS, RAS Mapper, and RiverCAD model are applied for the flooding area analysis using observed data and design rainfalls. The result of analysis is to compare observed flooding area based on the flood plain maps with estimated inundation area by hydraulic models and constructed river topographic maps. The results of this study are as follows; Flooding area by HEC-GeoRAS model is similar to the inundation area of flood plain map and appears in order of RAS Mapper, and RiverCAD model in all watersheds. Flood inundation area by SRTM DEM is similar to the result of 1:5,000 scale digital map in all watersheds and all analysis models. The SRTM DEM shows the most similarity to the digital map than ASTER DEM in all of the watershed scale and analysis models. HEC-GeoRAS and RiverCAD model are efficient models for flood inundation analysis in small watershed and HEC-GeoRAS and Ras Mapper model are efficient in medium to large watershed.

• Journal of the Korean GEO-environmental Society
• /
• 제8권5호
• /
• pp.31-38
• /
• 2007

The practical design method on sandmat uses a drain length, rate of consolidation settlement and permeability of sand as a major design factors. And, on the basis of this design process, it has been installed beneath the embankment with same thickness. However, the possibility the underestimation on the thickness of sandmat and the delayed drain have been pointed out by several authors caused by a differential settlement at the center and the end of embankment. In this study, therefore, the effect of the differential settlement on the thickness of sandmat and delayed drain through the numerical analysis of embankment was analyzed. As a result, a substantial sandmat thickness becomes small and the possibility of the delayed drain can be certified because of the development of differential settlement at the center and ends of embankment. As a countermeasure to overcome this problem, the applicability of the mound type sandmat was also investigated by the numerical method. It can be concluded that it maintains the designated substantial sandmat thickness throughout consolidation process, and is useful method to maintain the drain capacity. Especially, the mound type sandmat is effective method for a construction site where can cause a differential settlement such as embankment. Furthermore, it has to be designed on the basis of the accurate prediction of consolidation settlement as well as rate of consolidation settlement, drain length and permeability of sand.

• Journal of the Korean School Mathematics Society
• /
• 제5권2호
• /
• pp.1-15
• /
• 2002

The purpose of this study came to start to be helpful in that the teachers in field produced evaluation subject about the mathematics and applied by analyzing the performance capacity for the students about the subject developed through the application of subject about the teaching-learning model that can utilize the learners' learning experience and the development of items that can evaluate it by utilizing various and concrete operational materials as an object of the first year at the middle schools. The concrete purpose of realizing it is as follows. 1. This study is to develop the teaching-learning model centered on activities adequate to utilize various and concrete operational materials. 2. This study is to develop evaluation data for utilizing the concrete operational materials by making construction through the application of developed teaching-learning model as possible. 3. This study is to present standards initiative for reliable and fair marking about the evaluation data and to analyze the students' practice capacity by using it effectively. For accomplishing the purpose of this research, this study is the work-oriented teaching and learning model using learning data that can be easily found around the surroundings and 8 evaluation programs in order that the experience-oriented learning based on circumstances learning among the learning models of constructivism. Also, it is to examine the result after applying that on a basis of 25 students, consisted of only on class in a year, in the first year at the small size of agricultural middle schools. The result of this study from this research is as follows. First, as a result of frequency survey, of response about the developed evaluation data it showed positive response more than 80% of all the items. The atmosphere of self-directed learning was produced because the developed evaluation data could induce activity-based learning naturally by stimulating the students' curiosity and promoting interest. Second, this study executed t-test for the result of questionnaire about the mathematics propensity, and there were significant differences in 19 items among 25 items. It presented that the application of data about the teaching-learning and evaluation directly using concrete operational materials to the constructional learning by level might have desirable affect on the students' mathematical propensity. It came to be a motive that could increase value recognition and interest on the subject of mathematics by investigating a mathematical principle rule and confirming it through activity learning using the concrete operational materials.

• Journal of Korean Society of Forest Science
• /
• 제89권1호
• /
• pp.126-134
• /
• 2000

The purpose of this study is to examine the status of supply-demand and procurement of the timber used for wooden cultural properties. Because people require the high quality pine timber with cultural assurance and public function for cultural properties, it is priced far higher than ordinary construction timber. The timber consumption was estimated at 18 thousand cubic meter in 1998, of which the large sized log(LSL) with the small end diameter over 30cm consisted of 35.5%, equivalent to 6,300 cubic meter. Majority of the timber was supplied from private forest located in Kangwon-do and national forest, accounting for 65.7% and 16.7%, respectively. Recently the supply more and more relied on timber logged in Kangwon-do. Owing to lack of domestic supply of LSL class timber, part of the volume has been substituted by import log. Most of carpenters working on cultural properties thought that supply of LSL timber would hardly meet the increasing demand for uses of wooden cultural properties. Finally, in order to uphold the tradition of wooden cultural properties, it is necessary to establish a forest management plan which aim at producing large size high quality pine timber.

• Journal of Korea Water Resources Association
• /
• 제53권10호
• /
• pp.871-876
• /
• 2020

Understanding the wave characteristics near the outlet of coastal power plants for cooling water in the vicinity of the dredged areas is critically important for the construction and operation of the plants. By Employing the eigenfunction expansion method, in this study, we analyzed the reflection of monochromatic water waves over (1) shear currents near the outlet and (2) multi-arrayed trenches representing dredged areas. We firstly optimized the number of grids expressing shear currents and the number of evanescent modes based on a convergence test. We then analyzed the sensitivity of the reflection coefficients depending on (1) magnitude of shear currents, (2) width of shear currents, (3) a distance between adjacent trenches, and (4) a number of trenches. The results showed that the reflection coefficient was more sensitive to the number of trenches and the distance between trenches than the velocity of shear currents and the width of shear currents. We also found that even the effect of shear currents is relatively small, the effect is not negligible in a relative water depth from shallow to near shallow water waves (0.01 < kh ≦ 0.70).

• Journal of Wetlands Research
• /
• 제9권2호
• /
• pp.21-31
• /
• 2007

Estuarine wetland, where freshwater meets saltwater, is a transitional ecosystem that is valuable ecologically for a variety of reasons, such as feeding and breeding sites for birds, fish, and wildlife. However, research on the spatial distribution and temporal dynamics of estuarine wetlands in Korea is rare. As a fundamental basis for wetland conservation, this study quantified the wetlands in three major estuaries, and evaluated the temporal dynamics of the wetlands since the 1910s. In particular, this study classified the wetland types into mud flat, sand, and emergent-plant types, and estimated the change of each wetland type, using topographic maps produced in the 1910s, 1970s, and 2000s. The wetlands in both the Han and Youngsan River estuaries have declined since the 1910s, but the rate of wetland decline was relatively low before the 1970s, compared to that since the 1970s. The impact of human activities, such as the Youngsan Watershed Comprehensive Development Project and the construction of estuary barrages, has disrupted the estuary cycles and destroyed huge amounts of wetland in the Youngsan estuary. By contrast, estuarine wetlands have been preserved in the small Gahwa estuary, and provide a variety of habitats for plants and wildlife. A special management strategy for wetlands should be established as soon as possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권6호
• /
• pp.2604-2611
• /
• 2013

The Personal Rapid Transit(PRT) system has been highly interested in future transportation developments due to its on-demand and optimized door-to-door transport capability. However, the major impediments to the commercialization of PRT are the high cost for construction of infrastructures as opposed to the small transport capacity and difficulty in defining the role of PRT in building a balanced transportation system. In this study, the vertical transfer device for the PRT vehicle is developed to provide more flexible and better compatible urban mobility services between means of transportation, which is expected to meet particular demands in a particular environment. This apparatus was initially designed based on the basis of vertical circulating conveyors with steel chains, which is frequently used in logistics. Its advantages are capable of the non-stop loading and reduced head-way time. Most importantly, it was intensified by the additional idea to ensure the stable and reliable transfer of the PRT vehicle fully loaded with passengers. The 1/10-scale prototype was successfully tested to demonstrate a fundamental mechanism of vertical transfer and identify unexpected user requirements prior to a real manufacturing process.

• Journal of Conservation Science
• /
• 제27권3호
• /
• pp.313-322
• /
• 2011

The floral wall of Lee Sang-beom's House and Atelier, which is No. 171 of the Registrated Cultural Heritage was conserved. In addition, materials characteristics and manufacturing technique have revealed through the scientific analysis. As a result of the analysis, samples were divided into three sections; the support layer that is made from block bricks, the paint layer and the cement mortar layer on the paint layer for the reinforcement of the construction. The higher layer lies, the finer grains it has. Furthermore, a little it was generated a small quantity of pores and calcium carbonates ($CaCO_3$) generated due to aeration of cement mortar. The patterns of letters, animals and plants pattern were expressed in the paint layer by relief and openwork. The results of qualitative analysis of the pigments of the paint layer were detected components of carbon black (C), Fe oxide ($Fe_2O_3$) and oyster shell white ($CaCO_3$, or quicklime). On the other hands, as the conservation of the floral wall, stainless frames were set up for the structural stability, the cement mortar were removed from the surface and the partly damaged and cracked areas were filled with KSE Filler A, B.

• Journal of Energy Engineering
• /
• 제21권3호
• /
• pp.281-291
• /
• 2012

Recently, global economy has recovered and aspects of the renewable energy industry in the global competition is more fierce, the new growth engines of the major countries, including the United States and China, industry promotion policy as being deployed. Major advanced countries and Korea also invested a lot of money to wind power development as a part of renewable energy development and promoting the construction of wind power generation. The global wind power generation market is expected to further increase the scale to about 70 billion US dollars, thus, Korea as well as the installation of domestic wind power overseas actively considering. This study uses input-output analysis to estimate the role of wind power generation sector exports national economy. More specifically, this study shows what national economy effect of production-inducing effect, value-added inducing effect, and employment-inducing effect are explored with demand-driven moel. After define wind power generation sector what small sized of Input-Output table 168 sectors among 11 sectors, this study pays particular and close attention to wind power generation sector by taking the sector as exogenous specification and then investigating economic impacts of it. The wind power generation exportation case of overseas 100 billion won, production-inducing effect, value-added inducing effect, and employment-inducing effect are 205 billion won, 68 billion won and 1,054 persons, respectively. These quantitative information can be usefully utilized in the policy-making for the industrialization of wind power generation exports.

• Journal of Life Science
• /
• 제19권6호
• /
• pp.809-817
• /
• 2009

The phenotypes associated with a gene function are often the best clue to its role in the plant. Transgenic plants ectopically expressing or suppressing a gene can provide useful information related to the gene function. In this study, we constructed three vectors - pFGL571, pFGL846 and pFGL847 - for the Agrobacterium-mediated ectopic expression of plant genes using pPZP211 and modified CaMV 35S, UBQ3 or UBQ10 promoters. The three vectors have several merits such as small size, high copy in bacteria, enough restriction enzyme sites in multi cloning sites and nucleotide sequence information. Analysis of transgenic plants containing GUS or sGFP reporter genes under the control of modified CaMV 35S, UBQ3 or UBQI0 promoter revealed that all of the three promoters showed high activities during most developmental stages after germination and in floral organs. Furthermore, we generated a RNAi module vector, pFGL727, to suppress plant gene expressions and confirmed that pFGL727 is useful for the suppression of a gene expression using rice transgenic plants. Taken together, our new vectors would be very useful for the ectopic expression or the suppression of plant genes.