• Title/Summary/Keyword: Small Construction

Search Result 2,489, Processing Time 0.035 seconds

Development of a Coping Scale for Emergency Situations with Elementary School Students (학령기 아동의 응급상황에 대한 대처 측정도구 개발)

  • Kim, Shin-Jeong;Lee, Jung-Eun;Kang, Kyung-Ah;Song, Mi-Kyung;Lee, Sook-Kyung;Kim, Sung-Hee
    • Child Health Nursing Research
    • /
    • v.15 no.3
    • /
    • pp.271-281
    • /
    • 2009
  • Purpose: This study was conducted to develop an instrument to measure coping in emergency situations. Methods: The process included construction of a conceptual framework, generation 60 primary items, verification of construct validity and extraction of final items. The.60 preliminary items were reviewed for content validity by seven experts and were tested to evaluate inter-item correlation coefficient by three groups of elementary school students. From November 1 to December 10, 2008, data were collected from 920 elementary school students according to residential characters (major city, small town, rural area). Item analysis, factor analysis with rotation Varimax and Cronbach's alpha were used to analyze the data. Results: 1) There were 45 items in the final instrument categorized into 8 factors. 2) The factors were labeled as "Call for help and check" (8 items), "Care for common symptoms" (6 items), "Appropriate response for the situation" (5 items), "Evacuation" (6 items), "Care for tissue damage" (8 items), "Care for injury by heat, cold or foreign body" (6 items), "Offer help" (4 items) and "Rescue & escape" (2 items). 3) Cumulative percent of variance was 53.10% and eigen values ranged from 1.04 to 13.38. 4) Cronbach's alpha for the total was .943 and ranged from .527 to .869. Conclusion: Validity and reliability of the scale are confirmed in this study showing its utility for measuring coping in emergency situations with elementary school students. Utilization of the scale will also contribute to designing appropriate coping education programs for elementary school students.

  • PDF

A Study on the Environmentally Favorable Arrangement Technique of Water Space Considering Stream Landscape (하천경관을 고려한 환경친화적 수변공간 정비기법 연구)

  • Kim, Sun-Joo;Park, Sung-Sam;Lee, Kwang-Ya;Yoon, Kyung-Sub
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.40 no.6
    • /
    • pp.57-69
    • /
    • 1998
  • The creation of favorable water space, in our living circumferential space, is very important factor to offer rural scenery to neighbor residents. We are to introduce stream landscape arrangement technique considering favorable water environment against conventional methods. In this study, the modeling district is Seungdu small stream of Ansung river system in Pyung-Teak city, Kyonggi province, and we carried out stream landscape simulation. The arranging plans of landscape are classified ti three types. The first one is conservation type of ecological environment that can express natural characteristics of stream inherence, raise variety of living things and construct coexisting environment between human beings and the other living things. The secong one is favorable water approach type. The basic object of this type is space construction for easy approach to waterside and increase of comfortable feelings of spectators. The third one is water utilization/flood control management type. In planning of environmentally favorable landscape arrangement, this type is the most important but is likely to be ignored. This type is an arranging plan of stream landscape considering safety. Also, we developed Streams Landscape Simulation System(SLSS). This program can be used for comparison of original landscape image with simulated one. To apply SLSS on the interested stream, landscape simulation that is based on hydraulic characteristics, runoff, flow direction, detailed conditions of basin and ecosystem of stream have to be executed. In this point, developing a stereographical technique of image processing and exact study of applying plan have to be executed continually.

  • PDF

A Study on the Elasto-Plasticity Behaviour of a Ship's Plate under Thrust According to Boundary Condition (압축력을 받는 선체판의 경계조건에 따른 탄소성거동에 관한 연구)

  • Ko Jae-Yong;Park Joo-Shin;Park Sung-Hyun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.10 no.1 s.20
    • /
    • pp.29-33
    • /
    • 2004
  • Design of general steel structure had applied to achieve elastic designing concept so far. Because elastic design supposes that whole structure complies with elasticity formula so that achieve via allowable stress of material. It is concept that calculate stress distribution of construction about action external load and estimate load when the maximum stress reaches equally with allowable stress that is established by maximum safety load of the structure. But, absence that compose actuality structure by deal with external load increase small success surrender and structure hardness falls and structure in limited state finally on the whole as showing complicated process by interference between collapse and buckling under compression. Applied ANSYS (elasto-plasticity large deformation finite element method) to be mediocrity finite element program for analysis method and analysis control used in Newton-Raphson method & Arc-length method.

  • PDF

A case study for the asphalt damage with the subsidence (도로 침하에 따른 아스팔트 파손에 대한 연구)

  • Kang, In-Won;Cho, Sang-Hoon;Sim, Chul-Woo;Kim, Dong-Chul
    • Journal of the Korea Safety Management & Science
    • /
    • v.14 no.3
    • /
    • pp.175-181
    • /
    • 2012
  • This example was able to focus on the long usage of the pavement that it was merely through the oxidation of the asphalt pavement which it could contact with on the road in the industrial housing complex and correlation regulation of the asphalt subsidence with the load in basic Infra of the configuration. The problem in conjunction with the subsidence (transformation) was interpreted as a problem of the subsidence of each pavement layer to lead the subsidence of the road or the transformation to packaging side asphalt pavement, but the traffic number of times of the heavy vehicle highlights for main problems with the road where is concentrated. In the case of general asphalt paving, it thinks it exposes light, and to study a general phenomenon for the asphalt transformation and a cause for a pavement construction method and the property of material used for pavement and a complement method by the case study at this time of the compound with the heavy vehicle traffic that it can become clear that small success transformation occurs at a point in time when 1-2 years more pass, and a fatigue rift occurs by ultraviolet rays, the oxidation with the contact with the air afterwards, and described beginning to use by the above.

CURRENT STATUS OF NUCLEAR FUSION ENERGY RESEARCH IN KOREA

  • Kwon, My-Eun;Bae, Young-Soon;Cho, Seung-Yon;Choe, Won-Ho;Hong, Bong-Geun;Hwang, Yong-Seok;Kim, Jin-Yong;Kim, Kee-Man;Kim, Yaung-Soo;Kwak, Jong-Gu;Lee, Hyeon-Gon;Lee, San-Gil;Na, Yong-Su;Oh, Byung-Hoon;Oh, Yeong-Kook;Park, Ji-Yeon;Yang, Hyung-Lyeol;Yu, In-Keun
    • Nuclear Engineering and Technology
    • /
    • v.41 no.4
    • /
    • pp.455-476
    • /
    • 2009
  • The history of nuclear fusion research in Korea is rather short compared to that of advanced countries. However, since the mid-1990s, at which time the construction of KSTAR was about to commence, fusion research in Korea has been actively carried out in a wide range of areas, from basic plasma physics to fusion reactor design. The flourishing of fusion research partly owes to the fact that industrial technologies in Korea including those related to the nuclear field have been fully matured, with their quality being highly ranked in the world. Successive pivotal programs such as KSTAR and ITER have provided diverse opportunities to address new scientific and technological problems in fusion as well as to draw young researchers into related fields. The frame of the Korean nuclear fusion program is now changing from a small laboratory scale to a large national agenda. Coordinated strategies from different views and a holistic approach are necessary in order to achieve optimal efficiency and effectiveness. Upon this background, the present paper reflects upon the road taken to arrive at this point and looks ahead at the coming future in nuclear fusion research activities in Korea.

A Demographic Study of Changes in Nuptiality patterns in Korea (한국인의 초혼 연령 Pattern의 변동에 관한 인구학적 연구)

  • Choi, Soon
    • Korea journal of population studies
    • /
    • v.6 no.1
    • /
    • pp.3-42
    • /
    • 1983
  • The purposes of this paper is to introduce a technique for construction of nuptiality tables using proportion single of synthetic cohorts between times at two consecutive censuses, and to observe patterns of change in marriage habit of Korean through the nuptiality tables for single population from 1925 to 1980. In this paper abridged gross and net nuptiality tables for single population of Korea have been constructed for the four quinquinial period: 1925-1930, 1955-1960, 1970-1975, and 1975-1980. Significant time trend has been observed in the nuptiality rates among the single population. The major findings observed in each table are as follows; (1)During 1925-1930, the rates are initially small, but increase rapidly until they reach a maximum at ages 25-29 for bachelors and 20-24 for spinsters, following which they are still in high level. (2)During 1955-1960, the age pattern of nuptiality begins to change; for female population, the rates increase rapidly in the same pattern as in l925-l930 untill they reach the highest level at ages 25-29, after which they gradually decline. During the period, however, there were an unprecedented high level of marriage rates for male population at a relatively later ages. (3)During 1970-1975, Korea had experienced a transition in marriage habits; at this times, nuptiality rates for both sexes showed the same pyramid shaped patterns as in western countries as age increases. The mean ages at marriage for both sexes also reached the highest level of 27.5 years for males and 24.1 years for females. (4)During 1975-1980, the age patterns of nuptiality showed almost the same patterns as in 1970-1975. In the later age group, however, age-specific marriage rates for both sexes greatly declined compared to the level of 1970-1975, while the rate in age group of 20-24 for male population greatly increased.

  • PDF

The Clinical Analysis of 104 Sanhupung Patients that visited at an Oriental Medicine Hospital. (일개 한의대 부속 한방병원에 산후풍으로 내원한 환자 104례에 대한 실태 분석)

  • Jang, Se-Ran;Park, Young-Sun;Kim, Dong-Chul
    • The Journal of Korean Obstetrics and Gynecology
    • /
    • v.23 no.3
    • /
    • pp.192-204
    • /
    • 2010
  • Purpose: Sanhupung's pathological conditions is different from non-postpartum's disease. So it is important to analyze Sanhupung's construction, onset factors and Oriental theraphy. Methods: We studied 104 Sanhupung women visiting $\bigcirc\bigcirc$ hospital form January 2008 to December 2009. We analyzed the general characteristics, kinds of symptoms and Oriental theraphy's present condition. Also We compared patients' age, the number of live births and delivery month to the National Statistical Office's results. Results: 1. Patients over the age of 30, who have one child and who gave birth in September(14.42%) and in Summer(43.26%) occupied the highest percentage. But delivery method was not correlated with Sanhupung. 2. Musculo-skeletal symptoms(42.13%) were the most common symptoms. Wrist, waist, knees(59.59%) were the most common pain areas and the other pain symptoms (40.21%) appeared a significant portion of cases respectively. 3. In the 21~30days after delivery, the most patients visited. The number of patients admitted within 30 days after delivery or within 90 days was small comparing with Sanhupung onset. Patients treated within 10 days(47.12%) and treated only herb medicine(54.90%) were the most common. And the patients responded satisfacion or over were 88.46%. Conclusion: Patients' age, the number of born babies, delivery time were correlated with Sanhupung symptoms, but the method of delivery was not associated. And musculo-skeletal symptoms were the most common symptoms. Sanhupung patient's treatment period and methods were limited.

A Standard Business Process of Resource Planning Systems for Footwear Production (신발생산 자원관리 시스템의 표준 비즈니스 프로세스)

  • 류영근;조남호
    • Proceedings of the Korea Society for Industrial Systems Conference
    • /
    • 2002.06a
    • /
    • pp.56-56
    • /
    • 2002
  • The embodiment of working process fitting in characteristics of business each other in ERP system is indispensable factor. But, general ERP system is not so much profitable for the way of production management of footwear of domestic midge and small company that is dependant on most of the way of OEM production. Therefore, the development of ERP system fitted for present situation of the footwear manufacturing companies is necessary. For this, first, the business process for footwear production, for development of this system, have to be standardize and second, the model of Integrated system process based on standard business process have to be design for programming. In this paper, we proposed a method to build up standard business process and execute BPP in the point of the foundation for introduction and development of the resource planning systems only used by production of footwear and suited to the way of production management of the domestic companies manufacturing footwear. With this, we presented a process model of resource planning systems for footwear production. This study is focused on construction of integrated process model for production resource planning of ERP subsystems and the integrated process model consist of 13 modules.

  • PDF

Update/Revision of Digital Map by Using the Drawing of Work Completion Surveying (준공측량도면을 이용한 수치지도 수정/갱신)

  • Kim, Won-Dae;Lee, Kang-Won;Park, Hong-Gi
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.8 no.1 s.15
    • /
    • pp.85-95
    • /
    • 2000
  • There is a recent emphasis on the need for updating and revision of existing digital maps as more digital maps are used and produced. Various type of data sources, such as photographs, ground surveyed data and satellite images, are used in the revision and the updating process. The process is very time consuming and costly, especially for small regional areas. This study, attempts to present an effective update/revision method using the as-built surveying drawings and the accuracy of the digital map which has been updated and revised using this method was also investigated. This study showed that by using as-built surveying drawings of scale 1/1,200 to update a digital map of scale 1/1,000, the resulting accuracy satisfied the requirements of the national digital map accuracy specification for the corresponding scale. The necessity of the existence of the necessary drawings and maps is a requirement of this process and it is also suggested that densification of local control points especially in the urban areas is necessary for producing accurate as-built surveying drawings. This would require the establishment of rules and regulations which would require constructions to perform as-built surveying, immediately after the construction has been completed.

  • PDF

A study of seasonal variation of the residual flow before and after Saemangeum reclamation (새만금간척전 .후 잔차류의 계절변화에 관한 연구)

  • 신문섭
    • Proceedings of the Korean Society of Agricultural Engineers Conference
    • /
    • 1999.10c
    • /
    • pp.155-161
    • /
    • 1999
  • The land reclamation area of Saemangeum(Kunsan) is located between 126$^{\circ}$10' E~126$^{\circ}$50' E and 35$^{\circ}$35' N~356$^{\circ}$05'N at the western coast of the Korean peninsula. The are many small islands including extensive areas of semi-diurnally flooded and dewatered tidal flats. The reclamation area of Saemangeum has a range of 5.6m spring tide and the maximum tidal current speed is about 1.41m s-1 in ordinary spring tide. Most of the sediments deposited on the tidal flats are transported from the Geum river, the Manjyung river and The Dongjin river. The soil in this area consists of silty sand with the depth of 10m to 30m . The wind in winter is strong from the direction of northwest. In the past twenty years, land reclamation projects for agricutural purpose or industrial cocmplex have been mostly implemented along the western coast of Korea. Saemangeum coastal area is being constructed the33km sea dike and 40, 100ha reclamation area. The purpose of this study is to find the residual circulations in four seasons after the dike construction by a robust diagnostic and prognostic numerical model. Heat flux at the sea surface in January ,May , August , October was asopted on the basis on the daily inflow of solar radiation at the earth surface, assuming an average atomospheric transmission and no clouds , as a function of latitude and time of year(George L.P.J.E William, 1990). The discharge from the Geum , the Mankyung and the Dongjin rivers was adopted on the basis of experience formula of river flow in January , May ,August, October (The M. of C.Korea, 1993) . Water temperature and salinity along the open boundaries are obtained from the results of field observation s.

  • PDF