• The Journal of Korean Association of Computer Education
• /
• v.13 no.5
• /
• pp.103-110
• /
• 2010

If an exterior computer wants to join the Grid/cloud computing platform for a while, all of the related firewalls' filtering rule should be immediately updated. As the platform of Internet application is gradually evolving into the Grid/Cloud environment, the R&D requirement for the dynamic traversing of the multiple firewalls by a single try is also increasing. In this paper, we introduce the new mechanism for the dynamic traversing of the multiple firewalls using the concept of the one-time master key that can dynamically unlock the tiers of firewalls simultaneously instead of the existed filtering rule based method like a lock management at each firewall. The proposed master keys are like one-time password, consisted of IP addresses, port numbers, and TCP's initial sequence numbers, and generated by end users not administrators. They're exchanged mutually in advance and used to make a hole at local-side firewalls for the other's packet incoming. Therefore, the proposed mechanism can function regardless of the number or type of firewalls.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.233-236
• /
• 2009

In this study, the characteristic of the hybrid rocket motor with $LN_2O$(Liquid Nitrous oxide) was investigated experimentally. HDPE(High Density PolyEthlene) was used as fuel with different sized single port. When used $LN_2O$, combustion efficiency is lower than using $GN_2O$(Gas Nitrous oxide), because of completeness of vaporization of droplet and mixing. And regression rate was changed by different oxidizer phase. This behavior was considered that flame temperature and combustion of solid fuel front/end surface.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1251-1258
• /
• 2002

The weather FAX machine is the one of necessary of safety navigation for ship. which is the machine which make the weather image by the receiving radio signal which is modulated using FSK method and transmitted on air by coast station. after Coast station scan the weather image and broadcast the image with black dot to 1500Hz and white dot to 2300Hz using FSK modulation. This paper implement weather fax machine using only general IBM-PC by software. By using IBM-PC we can make some good functions like print, edit, save etc. The modulated signal from SSB go into RS232C port via photo coupler not to give damage to PC. by using Timer Interrupt and RS232C serial interrupt, we can measure signal frequency and remake weather image. This paper use only IBM-PC with general SSB receiver which is widely spread on the ship. so this is very economic and possible to implement mutifunctions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.124-131
• /
• 2014

This paper describes a design of an adaptive baseband modem based on TDMA(time division multiple access) with a relay protocol function for wireless personal area networks. The designed baseband modem is controlled by a master synchronization signal and can be configured a relay network up to 14 hops. For efficient data relay communications, the internal buffer design is optimized by implementing a priority memory bus controller to a single port memory. And the priority memory bus controller is also designed to minimize the number of synthesized logic gates. To implement the synchronization function of the narrowband TDMA relay communication, the number of gates has been reduced by dividing the frame synchronization circuits and the network slot synchronization circuits. By using these methods, the number of gates are used about 37%(34,000 gates) on Xilinx FPGA XC6SLX9 which has 90,000 gates. For the 1024-bit frame size with a 32-bit synchronization word, the communication reception rate is 96.4%. The measured maximum transmission delay of the designed baseband modem is 230.4 msec for the 14-hop relay communication.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.6
• /
• pp.59-70
• /
• 2004

SMT(Simultaneous Multi Threading) architecture uses TLP(Thread Level Parallelism) and increases processor throughput, such that issue slots can be filled with instructions from multiple independent threads. Having multiple ready threads reduces the probability that a functional unit is left idle, which increases processor efficiency. To utilize those advantages for the SMT processors, the issue unit must control the flow of instructions from different threads and not create conflicts among those instructions, which make the SMT issue logic extremely complex. Therefore, our SMT architecture, which is modeled in this paper, uses an in-order-issue and completion scheme, and therefore, can use a simple issue mechanism with a scoreboard already instead of using register renaming or a reorder buffer. However, an SMT scoreboarding mechanism is still more complex and costlier than that of a single threaded conventional processor. This paper proposes an optimal implementation of a scoreboarding mechanism for an ARM-based SMT architecture.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.31-38
• /
• 2005

In this paper, the combustion characteristics of a hybrid propulsion system were studied with various L/D(length vs diameter) ratio of the single po.1 type solid fuel. Experiments were performed for 2 cases with the fixed grain port diameter and fuel length respectively. For the first case, results show that there are no large variations for regression rates as the L/D ratio changes. And as the L/D ratio increases, the O/F ratio decreases and thrust, characteristic velocity tends to increase. For the second case, there is no large change for O/F ratio, thrust and characteristic velocity as L/D ratio changes. On the other hand, as the L/D ratio decreases, only the regression rate tends to increase. Experimentally, exponent n in $\dot{r}=a{G_0}^n$ was found about 0.5 and then the O/F ratio was shown nearly constant. In the experiment, PE and gas oxygen were used as a fuel and an oxidizer.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.19-25
• /
• 2005

The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, bemuse of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now bemuse of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. Now our country is at the blank stage about the establishment of SPM research Most of the situations refer to overseas standards. But these standards lack consistency and clarity. So when moving to the another safe place from SPM, we must Carry through the research and study on the ships using sailing through AIS Data We must put forward a new standard about maneuvering area of ships moving at SPM.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.5
• /
• pp.243-250
• /
• 2002

In the synthesis of the current source distribution function of an array antenna with the arbitrary radiation pattern, the Woodward-Lawson sampling method has been mainly used for the synthesis of an even function lobe pattern. In this paper, the method is extended to the synthesis of the odd function pattern and then the optimum synthesis method for the nonlinear source distribution function is proposed. The proposed method is applied to the design of nonuniform transmission lines with arbitrary reflection responses. The both dispersive impedance profiles of single and coupled nonuniform lines with arbitrary reflection responses are directly synthesized by the sampled values of a reflected spectral pattern which is optimally shaped by a perturbation of its complex null positions, hence removing the conventional step-by-step segmentation process and global optimization routines. The control problem in the case that all of port impedances are identical is also solved. The generality of the proposed method is verified by a filter design with the controlled arbitrary passband

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.434-442
• /
• 2003

Software internationalization, the process of making software easier to localize for specific languages, has deep implications when applied to speech technology, where the goal of the task lies in the very essence of the particular language. A greatdeal of work and fine-tuning has gone into language processing software based on ASCII or a single language, say English, thus making a port to different languages difficult. The inherent identity of a language manifests itself in its lexicon, where its character set, phoneme set, pronunciation rules are revealed. We propose a decomposition of the lexicon building process, into four discrete and sequential steps. For preprocessing to build a lexical model, we translate from specific language code to unicode. (step 1) Transliterating code points from Unicode. (step 2) Phonetically standardizing rules. (step 3) Implementing grapheme to phoneme rules. (step 4) Implementing phonological processes.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.2
• /
• pp.23-75
• /
• 1995

A major change occuring in the workplace is the willingness of union leaders, managers, and workers to experiment with various work schedules and to work toward the improvement in the QWL(quality of work life). In this study, the writer measures the level of QWL, embodies components of QWL, testifies the difference of QWL according to the demographical traits, and develops some scales to measure QWL in merchant ships. To achieve objectives of the paper, 11 hypotheses were established and a questionnaire was used, 894 proper data was obtained from 2, 910 Korean seamen working in merchant ships. Results of analyses are as follows : 1) The components of QWL in merchant ships are job, employee satisfaction, wage, welfare, working condition, supervise, colleague relations, initiative, and organization management. 2) Seamen of merchant ships are satisfied with job, supervise, colleague relations, and organization management. They are dissatisfied employee satisfaction, wage, welfare, and working condition. 3) According to demographical traits, the number of the factors significant difference(P<0.05) among components of QWL are 9 for type of ships, 8 ages of seamen, 7 for married or single, nationality of ships, and education level respectively, 5 for seamen career, for 4 rank on board and trading route of ships respectively, 2 for whether union or not and whether union involvement or not respectively, and 1 for department on board. 4) Results which tested hypotheses are as follows : For the components of QWL, married men are more satisfactory than an unmarried men, officers are more dissatisfactory than ratings, old men are more satisfactory than young men, men in high education level are more dissatisfactory than men in low education level, those who are much careers as a seaman are more satisfactory than those who are little careers as a seaman. There are significant differences in the components of QWL according to nationality and type of ships. There are insignificant differences in the components of QWL according to the shipboard department, whether union is or not, whether union involvement is or not, and trading route of ships.