• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1131-1134
• /
• 2003

A low temperature doping technique has been studied for application in poly-Si TFT's on plastic substrates. Heavily-doped amorphous silicon layers were deposited on poly-Si and the dopant atoms were driven in by subsequent excimer laser annealing. The entire process was carried out under a substrate temperature of $120^{\circ}C$, and a sheet resistance as low as $300 {\Omega}/sq$. was obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.35-36
• /
• 2009

In this work, we demonstrate 800V 4H-SiC power DMOSFETs with several structural alterations to obtain a low threshold voltage ($V_{TH}$) and a high figure of merit ($V_B^2/R_{SP,ON}$). To optimize the device performance, we consider four design parameters; (a) the doping concentration ($N_{CSL}$) of current spreading layer (CSL) beneath the p-base region, (b) the thickness of p-base ($t_{BASE}$), (c) the doping concentration ($N_J$) and width ($W_J$) of a JFET region, (d) the doping concentration ($N_{EPI}$) and thickness ($t_{EPI}$) of epi-layer. These parameters are optimized using 2D numerical simulation and the 4H-SiC DMOSFET structure results in a threshold voltage ($V_{TH}$) below ~3.8V, and high figure of merit ($V_B^2/R_{SP,ON}$>${\sim}200MW/cm^2$) for a power MOSFET in $V_B$-800V range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.132-132
• /
• 2008

Silicon carbide (SiC) is an attractive material for high-power, high-temperature, and high-frequency applications. So far, atomic force microscopy (AFM) has been extensively used to study the surface charges, dielectric constants and electrical potential distribution as well as topography in silicon-based device structures, whereas it has rarely been applied to SiC-based structures. In this work, the surface potential and topography distributions SiC with different doping levels were measured at a nanometer-scale resolution using a scanning kelvin probe force microscopy (SKPM) with a non-contact mode AFM. The measured results were calibrated using a Pt-coated tip and a metal defined electrical contacts of Au onto SiC. It is assumed that the atomically resolved surface potential difference does not originate from the intrinsic work function of the materials but reflects the local electron density on the surface. It was found that the work function of the Au deposited on SiC surface was higher than that of original SiC surface. The dependence of the surface potential on the doping levels in SiC, as well as the variation of surface potential with respect to the schottky barrier height has been investigated. The results confirm the concept of the work function and the barrier heights of metal/SiC structures.

• Journal of the Korean Ceramic Society
• /
• v.29 no.10
• /
• pp.822-826
• /
• 1992

SiO2 doped sapphire single crystals were grown by Verneuil method using feed material which prepared by adding SiO2 in Al2O3. Crystal growing were attempted with varing doping amount of SiO2 from 0.01 to 1.0 wt% and when the doping amount of SiO2 were 0.01~0.04 wt%, single crystals could be attained. Starting materials for feed powder were 99.99% purity alumina and extra pure SiO2 powder. Mixing these two materials by wet milling for 24 hours and drying the mixture and then was calcined at 900~110$0^{\circ}C$ for 2~4 hours. The grown crystals had yellowish color and were somewhat transparent. During growing process the flow range of oxygen was 5~7.5ι/min and of hydrogen was 13~25ι/min, the average growth rate was 7.0~11 mm/hr. The pressure of gases were fixed at 5psi. The color of crystal was appeared and mechanical property of sapphire was developed by doping of SiO2.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.61.1-61.1
• /
• 2011

We report on a detailed study on gap-state distribution in thin amorphous silicon layers(a-Si:H) with film thickness between 5 nm and 20 nm c-Si wafers performed by UV excited photoelectron spectroscopy(UV-PES). We measured how the work function, the gap state density, the position of the Fermi-level and the Urbch-energy depend on the layer thickness and the doping level of the ultra thin a-Si:H(n) layer. It was found, that for phosphorous doping the position of the Fermi level saturates at $E_F-E_V$=1.47 eV. This is achieved at a gas phase concentration of 10000 ppm $PH_3$ in the $SiH_4/H_2$ mixture which was used for the PECVD deposition process. The variation of the doping level from 0 to 20000 ppm $PH_3$ addition results in an increase of the Urbach energy from 65 meV to 101 meV and in an increase of the gap state density at midgap($E_i-E_V$=0.86eV) from $3{\times}10^{18}$ to $2{\times}1019cm^{-3}eV^{-1}$.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.84-89
• /
• 1995

The growth and the film characteristics of heteroepitaxial $Si_{1-x}Ge_x$ films growth by the Rapid Thermal Chemical Vapor Deposition(RTCVD)method are described. For the growth of $Si_{1-x}Ge_x$ heteroepitaxial layers, $SiH_4/GeH_4/H_2$gas mixtures are used. The growth conditions are varied to investigate their effects on the Si/Ge composition ratios, the interface abruptness and crystalline properties. The Si/Ge composition ratios are analyzed with the RBS and the SIMS techniques, and the interface abruptness are deduced from these data. The crystalline properties are analyzed from TEM pictures. The experimental data shows that the crystalline perfection is excellent at the growth temperature of as low as $650^{\circ}C$, and the composition ratios change linearly with $SiH_4/GeT_$$ gas mixing ratios in our experimental ranges. Boron doping experiments are also performed using 200 ppm $B_2H_6$ source gas. The doping profiles are measured with SIMS technique. The SIMS data shows that the doping abruptness can be controlled within about 200$\AA$/decade.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.52-52
• /
• 2011

A novel deposition process for n-type nanocrystalline silicon (n-type nc-Si) thin films at room temperature has been developed by adopting the neutral beam assisted chemical vapor deposition (NBa-CVD). During formation of n-type nc-Si thin film by the NBa-CVD process with silicon reflector electrode at room temperature, the energetic particles could induce enhance doping efficiency and crystalline phase in polymorphous-Si thin films without additional heating on substrate; The dark conductivity and substrate temperature of P-doped polymorphous~nano crystalline silicon thin films increased with increasing the reflector bias. The NB energy heating substrate(but lower than $80^{\circ}C$ and increase doping efficiency. This low temperature processed doped nano-crystalline can address key problem in applications from flexible display backplane thin film transistor to flexible solar cell.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.146-151
• /
• 1995

We have studied the fabrication self aligned atmospheric pressure(AP) CVD a-Si thin film transistor with source-drain ohmic contact by using ion shower doping method. The conductivity is 6*10$^{-2}$S/cm when the acceleration voltage, doping time and doping temperature are 6kV, 90s and 350.deg. C, respectively. We obtained the field effect mobility of 1.3cm$^{2}$/Vs and the threshold voltage of 7V.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.288-288
• /
• 2012

In this study, we investigated that the resistance switching characteristics of W-doped NbOx films with increasing W doping concentration. The W-doped NbOx based ReRAM devices with a TiN/W-doped NbOx/Pt/Ti/SiO2 were fabricated on Si substrates. The 50 nm thick W-doped NbOx films were deposited by reactive dc magnetron co-sputtering at $400^{\circ}C$ and oxygen partial pressure of 35%. Micro-structure of W-doped NbOx films and atomic concentration were investigated by XRD, TEM and XPS, respectively. The W-doped NbOx films showed set/reset resistance switching behavior at various W doping concentrations. The process voltage of set/reset is decreased and whereas the initial current level is increased with increasing W doping concentration in NbOx films. The change of resistance switching behavior depending on doping concentration was discussed in terms of concentration of metallic tungsten of oxygen of W-doped NbOx.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.179-182
• /
• 2007

Polycrystaline (poly) 3C-SiC thin film on n-type and p-type Si were deposited by APCVD using HMDS, $H_2$, and Ar gas at $1180^{\circ}C$ for 3 hour. And then the schottky diode with Au/poly 3C-Sic/Si(n-type) structure was fabricated. Its threshold voltage ($V_d$), breakdown voltage, thickness of depletion layer, and doping concentration ($N_D$) value were measured as 0.84 V, over 140 V, 61nm, and $2.7{\times}10^{19}\;cm^3$, respectively. The p-n junction diode fabricated by poly 3C-SiC was obtained like characteristics of single 3C-SiC p-n junction diode. Therefore, its poly 3C-SiC thin films are suitable MEMS applications in conjuction with Si fabrication technology.