• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.62-67
• /
• 2015

The carbon microspheres of a core-shell type were grown by the method of mixed-source hydride vapor phase epitaxy (HVPE). The surface and the cross section of the carbon microsphere grown by a new method were observed by scanning electron microscope (SEM). The characteristics of the carbon microsphere were investigated by X-ray photoelectron spectroscopy (XPS) and a high resolution-transmission electron microscope (HR-TEM). From these measurements, the diameters of carbon sphere were about few hundred micrometers. Furthermore, we show that the carbon microsphere of the core-shell type by mixed-source HVPE method can be grown successfully with the larger size than those of the existing one. This mixed-source HVPE method is proposed a new method for making of carbon microsphere.

• Journal of Aquaculture
• /
• v.20 no.4
• /
• pp.232-238
• /
• 2007

The distribution of stock density and larvae of Atrina pectinata was examined in Deukryang Bay. Sampling of adult stock was seasonally conducted from 29 stations in the bay in May, August, and November 1995 and February 1996. And the larvae were sampled with interval of 3 to 7 days from 12 stations from July to October 1996. Seasonal abundance of the adult in number and in biomass were the highest in August ($18\;inds./m^2$) and in November ($2,790\;g/m^2$), respectively, at G1 station located in the most inner bay. In frequency distribution of shell height, the mode in May appeared in 10-14 cm group with 62%, and that of the other seasons in $15{\sim}19\;cm$ group. The larvae were also distributed mainly at G1 as the adult were. The larval abundance showed a periodical cycle which seemed to be related to lunar cycle. The highest abundance of the larvae occurred on August 16 with $8\;inds./m^3$, and then decreased continuously. With regard to frequency distribution of larval shell height, the larvae less than $200\;{\mu}m$ occurred from July to October. And the mode in July appeared in small size group ($200{\sim}249\;{\mu}m$) with 38%. These results mean that A. pectinata spawned from July to October, mainly middle July to middle August. The larval distribution showed the same geographical tendency to adult distribution. Both the adult and the larvae mainly distributed in the most inner bay and west area of Deukryang island, where was shallower, warmer, and higher primary productivity than the entrance area of the bay and east area of the island. However, larval abundance of A. pectinata in this study was so low compared to adult biomass. The reason for this unusual phenomenon should be understood with the detail research in future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.831-837
• /
• 2013

An experiment was conducted to investigate the effects of dietary supplementation of Rhodobacter capsulatus KCTC-2583 on egg-yolk and serum cholesterol, egg production and quality parameters during the late laying periods in hens. A total of 160 Hy-Line Brown layers (54 wk-old) were randomly allotted to 4 treatment groups on the basis of laying performance. Each treatment had 4 replicates with 10 birds each (40 birds per treatment). Two hens were confined individually with cage size $35{\times}35{\times}40$ cm and each 10 birds (5 cages) shared a common feed trough between them forming one experimental unit. Dietary treatments were; basal diet supplemented with 0 (control), 0.05, 0.10 and 0.15% R. capsulatus KCTC-2583. Experimental diets were fed in meal form for 56 d. Dietary supplementation of increasing levels of R. capsulatus KCTC-2583 reduced (linear, p<0.05) egg-yolk cholesterol and triglycerides (d 28, 42 and 56) concentrations. Also, serum cholesterol and triglycerides (d 21, 42 and 56) concentrations were linearly reduced (p<0.05) with increasing dietary R. capsulatus KCTC-2583. Laying hens fed a diet supplemented with increasing levels of R. capsulatus KCTC-2583 had increased (linear; p<0.05) overall egg production, egg weight, egg mass and feed efficiency. However, dietary treatments had no effect (linear or quadratic; p>0.05) on feed intake of laying hens. At d 28 and 56, breaking strength and yolk colour of eggs were linearly improved (p<0.05) in laying hens fed dietary increasing levels of R. capsulatus KCTC-2583. Dietary treatment had no effects (linear or quadratic; p>0.05) on albumin height, shell thickness and shell weight at any period of experiment. These results indicate that dietary supplementation of R. capsulatus KCTC-2583 has the potential to improve the laying hen performance and lead to the development of low cholesterol eggs during late laying period in Hy-Line Brown hens.

• The Korean Journal of Malacology
• /
• v.19 no.2
• /
• pp.153-153
• /
• 2003

Reproductive cycle with the ovarian developmental phases, first sexual maturity of the female venus clam, Cyclina sinensis, was investigated by a histological study, and the number of spawned eggs and spawning frequency by artificial spawning induction of the clams were estimated. Samples were collected from the intertidal zone of Simpo, Gimje city, Korea between January and December, 2001. The reproductive cycle of this species can be classified into five successive stages; early active (February to April), late active (March to June), ripe (May to August), spent (July to September), and spent and inactive (September to February). The spawning period was once a year between July and August, a spawning peak was seen in July and August. Percentages of first sexual maturity of female clams of 25.1-30.0 mm in shell length were 64.3%, and 100% for the clams > 40.1 mm. The number of the eggs released from each clam by spawning induction increased as the size of clam in terms of shell length increased. The mean number of the eggs released from the second induction of spawning was 76.87% of the number of the eggs released in the first spawning. Our data indicated that the interval of each spawning was estimated to be approximately 15-17 (average 16.5) days.

• Parasites, Hosts and Diseases
• /
• v.50 no.3
• /
• pp.207-213
• /
• 2012

The egg morphology of minute intestinal flukes (MIF) that can occur as human infections in the Republic of Korea, i.e., Metagonimus yokogawai, M. miyatai, M. takahashii, Heterophyes nocens, Heterophyopsis continua, Stellantchasmus falcatus, Stictodora fuscata, Pygidiopsis summa, and Gymnophalloides seoi, was studied in comparison with Clonorchis sinensis. The adult worms were obtained from residents of endemic areas, and their intrauterine eggs were studied and measured using light microscopy; the length, width, length-width ratio (LWR), and Faust-Meleney index (FMI). Several specimens were processed for scanning electron microscopy (SEM), and before gold-coating, the uterine portion of each fluke was etched with a sharp pin in order to expose the eggs. The MIF eggs were ovoid, pyriform, or elliptical with a size range of $21-35{\times}12-21{\mu}m$. S. fuscata eggs revealed the highest FMI (largest in the area) and lowest LWR, whereas P. summa eggs showed the lowest FMI and medium LWR. SEM revealed that G. seoi and S. fuscata had remarkably clean shell surface lacking the muskmelon-like structure which is prominent in C. sinensis eggs. In Metagonimus spp., H. continua, H. nocens, and S. falcatus eggs, minute surface ridges were recognizable though less prominent compared with C. sinensis. On the surface of P. summa eggs, thread-like curly structures were characteristically seen. The results revealed that important differential keys for MIF eggs include the length, width, area (FMI), shape of the eggs, and the extent of the muskmelon-like structure or ridges on their shell surface and operculum.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.168-176
• /
• 2007

The sub-micron particles of poly ($\gamma-glutamic$ acid) (PGA) containing lysozyme have been prepared using supercritical antisolvent (SAS) precipitation process at various experimental conditions such as pressure, temperature, inner diameter of nozzle, and concentration. As overall results of the application of SAS process to this system, the smaller size powder has been produced as (i) increasing pressure, (ii) decreasing temperature, (iii) decreasing the inner diameter of nozzle, and (iv) decreasing the concentration of PGA and lysozyme. It is found by means of FT-IR analysis that during SAS process, the composition has changed from the original composition of PGA : lysozyme=50 : 50 into PGA : lysozyme=33 : 67 at final product powder. It means that PGA has higher solubility for the mixed solvent of carbon dioxide and dimethyl sulfoxide (DMSO). Due to such difference of solubility, this particle forms the core-shell structure of which the core consists mainly of lysozyme. It is also found that the residual DMSO amount of $7.8\times10^{-3}wt%$ exists inside the powder.

• Journal of Sericultural and Entomological Science
• /
• v.49 no.1
• /
• pp.24-27
• /
• 2007

Silkworm fed on the mulberry leaf mixed with silver nanoparticle to produce silver-nanoparticle embedded cocoon. Comparative analysis of silver content of cocoon shell, percentage of pupation and percentage of cocoon-shell weight showed that the optimum concentration and the feeding period of mulberry leaf mixed with silver nanoparticle were 500 ppm and the period from 3 day 5 instar to mounting of silkworm. The silver content of cocoon was observed variously by silkworm breedings. C212 variety makes pale yellow cocoon with the highest silver content(69%). Using the scanning electron microscope, we showed that the size of silver nanoparticles in silk was observed from 26.98 to 99.81nm. Silver-nanoparticle embedded silk is expected to use as high valuable application owing to the different functional properties including antibiotic characteristics and mechanical and electronic properties. The applicable fields expected is antistatic and/or electronic products with biological degradable natural materials.

• Clean Technology
• /
• v.27 no.2
• /
• pp.115-123
• /
• 2021

This study demonstrates a new method for the synthesis of organic-inorganic hybrid particles composed of an inorganic silica shell and organic core particles. The organic core particles are prepared with a uniform size using droplet-based microfluidic technology. In the process of preparing the organic core particles, uniform droplets are generated by independently controlling the flow rates of the dispersed phase containing photocurable resins and the continuous phase. After the generation of droplets in a microfluidic device, the droplets are photo-polymerized as particles by ultraviolet irradiation at the ends of microfluidic channels. The core particle is coated with a nano complex composed of polyallylamine hydrochloride (PAH) and phosphate ion (Pi) through strong non-covalent interactions such as hydrogen bonding and electrostatic interaction under optimized pH conditions. The polyamine nano complex rapidly induces the condensation reaction of silicic acid through the arranged amine groups of the main chain of PAH. Therefore, this method enabled the preparation of organic-inorganic hybrid particles coated with inorganic silica nanoparticles on the organic core. Finally, we demonstrated the synthesis of organic-inorganic hybrid particles in a short time under ambient and environmentally friendly conditions, and this is applicable to the production of organic-inorganic hybrid particles having various sizes and shapes.

• Composites Research
• /
• v.19 no.1
• /
• pp.29-35
• /
• 2006

The avoidance of enemy's radar detection is very important issue in the modem electronic weapon system. Researchers have studied to minimize reflected signals of radar. In this research, two types of radar absorbing structure (RAS), 'C'-type shell and 'U'-type shell, were fabricated using fiber-reinforced composite materials and their radar cross section (RCS) were evaluated. The absorption layer was composed of glass fiber reinforced epoxy and nano size carbon-black, and the reflection layer was fabricated with carbon fiber reinforced epoxy. During their manufacturing process, undesired thermal deformation (so called spring-back) was observed. In order to reduce spring-back, the bending angle of mold was controlled by a series of experiments. The spring-back of parts fabricated by using compensated mold was predicted by finite element analysis (ANSYS). The RCS of RAS shells were measured by compact range and predicted by physical optics method. The measured RCS data was well matched with the predicted data.

• The Korean Journal of Malacology
• /
• v.31 no.2
• /
• pp.93-101
• /
• 2015

The effects of different stocking densities on the growth and survival rate of the 3-year-old pacific abalone, Haliotis dicus hannai were investigated in marine net cage for a year. Stocking densities in net cage ($2.4{\times}1.2m$) was set 15, 30, 45 and 60 percentage (= per)/sq m (square meter, $m^2$) with share to cross-sectional area per shelter. The water temperature during the testing period was $8.2^{\circ}C-22.1^{\circ}C$, and salinity is $33.5{\pm}0.6psu$, and dissolved oxygen is $7.87{\pm}0.86mg/L$. In the shell length (initial size : $71.50{\pm}2.28mm$) growth and shell breadth (initial size : $46.43{\pm}2.28mm$) of the test abalones, the absolute growth rate (ARG), daily growth rate (DGR) and specific growth rates (SGR) of the 15 per/sq m and 30 per/sq m were higher than those of 45 per/sq m and 60 per/sq m density group (P < 0.05). Also in the weight (initial weight : $35.7{\pm}8.1g$), it showed the same results. In survival rates, it were that 15 per/sq m and 30 per/sq m is significantly higher than 45 per/sq m and 60 per/sq m. Therefore, it was that the 15 per/sq m is optimized stocking density in marine net cages about the 3-year-old pacific abalone over 70 mm size. The result shown that total cross-sectional area under the shelter is based on 15 per/sq m ($2.4{\times}2.4m$, 354 number in a net cage) is suitable for fast growth and survival. But if the economy consider, optimized stocking density would be appropriate to accept 30 per/sq m ($2.4{\times}2.4m$, 710 number in a net cage).