• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.113-122
• /
• 2010

Space frame structures are included in the large spatial structures and can adopt various structure types. But, it is not easy to choose the optimal member size and shape because it depends on the structural engineer's experience and the repeated trial and error. Therefore, in this study, the final goal is to help the designer with the selection of the optimum shape. First, various space frame structures with ellipse dome and vault complex types are chosen and the shape generation method is considered to generate the nodes, coordinates and members. In optimal design process of space frame structure, each node coordinate changes according to height variation or the number of rings. Therefore, the auto generation technique of nodes and members is required in order to consider this phenomenon in optimal design process. Next, the shape generation module is created, base on the shape generation method. This module is connected with the analysis module and the optimization algorithm. Finally, the example model is presented for the evaluation of the efficiency of optimization algorithms.

• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.179-184
• /
• 2007

In order to extract more accurate skin parameters, this study was focused on the improvement of the efficiency of a previous inverse fitting algorithm based on genetic algorithms. The algorithm provides the best fitting result of the diffusion approximation model to a VRS (visual reflectance spectroscopy) curve of skin. Simplex and wavelength selection methods were applied to the previous algorithm. Nine skin parameters were inversely extracted from the modeling studies. The revised inverse fitting algorithm was determined to produce an 83% reduction of computation time and a 0.64% reduction of sum of square error, compared to the previous algorithm. In conclusion, we confirmed that the new algorithm provides faster and more accurate solutions for the diffusion approximation model.

• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.25-32
• /
• 2011

In this study, software products developed in the course of testing, software managers in the process of testing software test and test tools for effective learning effects perspective has been studied using the NHPP software. The Weibull distribution applied to distribution was based on finite failure NHPP. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than automatic error that is generally efficient model could be confirmed. This paper, a numerical example of applying using time between failures and parameter estimation using maximum likelihood estimation method, after the efficiency of the data through trend analysis model selection were efficient using the mean square error and $R_{sq}$.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.19-26
• /
• 2012

In this study, software products developed in the course of testing, software managers in the process of testing software and tools for effective learning effects perspective has been studied using the NHPP software. The log type hazard function applied to distribution was based on finite failure NHPP. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than autonomous errors-detected factor that is generally efficient model could be confirmed. This paper, a failure data analysis of applying using time between failures and parameter estimation using maximum likelihood estimation method, after the efficiency of the data through trend analysis model selection were efficient using the mean square error and $R^2$(coefficient of determination).

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.41-49
• /
• 2018

The purpose of this study is to develop a floor mortar construction technique which has high strength and inherent mechanical properties and does not cause cracks due to shrinkage after construction. It has been demonstrated that compressive strength, bending strength, flow with floor mortar, and crack reduction performance. As a result, it was confirmed that the developed floor mortar had the same or better performance comparing with the existing foreign products. The results of this experiment can be used as a validation material for high performance and high flowable mortar construction technology with excellent material performance, economical efficiency and construction ability by securing the required performance as floor mortar and selecting the optimal formulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.971-982
• /
• 2008

In this paper, we propose a new digital duplexing scheme, called SDD(Synchronous Digital Duplexing), which can increase data efficiency and flexibility of resource by transmitting uplink signal and downlink signal simultaneously. In order to transmit uplink data and downlink data simultaneously, the proposed SDD obtains mutual informations between AP(access point) and each SSs(subscriber station), SS and other SSs by mutual ranging procedure. These informations are used for selection of transmission time, decision of CS insertion, setting of CS length, and FFT duration resetting, etc. It is shown that the proposed SDD is appropriate for duplexing scheme in indoor environments over the conventional TDD(Time Division Duplexing) and FDD(Frequency Division Duplexing).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.831-834
• /
• 2011

LEACH(One of the leading algorithms in the field of WSN) for the life of the system, even by the number of all nodes to ensure that the cluster header. However, each round does not guarantee a certain number of cluster header. So sometimes cluster header is elected of small number or not elected. If cluster header number is to small, takes a heavy load on cluster header. And empty cluster is occur depending on the location of the cluster header. The algorithm proposed in this paper, the area of interest is divided into sectors. And randomly, cluster header be elected one the in each sector. When clustering the sensor nodes will belong to the nearest cluster header. So clustering is independent of the sector. This algorithm is guarantee a certain number of cluster header in each round. And has prevent occurrence of empty cluster.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.406-417
• /
• 2001

With the advances in multimedia databases on the World Wide Web, it becomes more important to provide users with the search capability of distributed multimedia data. While there have been many studies about the database selection and the collection fusion for text databases. The multimedia databases on the Web have autonomous and heterogeneous properties and they use mainly the content based retrieval. The collection fusion problem of multimedia databases is concerned with the merging of results retrieved by content based retrieval from heterogeneous multimedia databases on the Web. This problem is crucial for the search in distributed multimedia databases, however, it has not been studied yet. This paper provides novel algorithms for processing the collection fusion of heterogeneous multimedia databases on the Web. We propose two heuristic algorithms for estimating the number of objects to be retrieved from local databases and an algorithm using the linear regression. Extensive experiments show the effectiveness and efficiency of these algorithms. These algorithms can provide the basis for the distributed content based retrieval algorithms for multimedia databases on the Web.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.6
• /
• pp.458-469
• /
• 1989

A measurement method is proposed which finds 3-D position and attitude of a known polyhedra utilizing shading information. Through the systematic interpretation of relations between polyhedra and its image as well as shadow image and also the determination of candidate position, 3-D information with respect to vertex of polyhedra is extracted. Following preprocessing of this information, the image of polyhedra is represented in terms of the scene with positioned object and the correspondence is searched by means of matching process between a scene description of the object and the correspondence is searched by means of matching process between a scene description of the object and a model description stored in data-base. In the experiments, initially 3-D information is employed to select several model regions, and objects are recognized through matching process with respect to scene regions. The results demonstrate that the recognition system performs with a high efficiency by proper selection of the threshold values.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.4
• /
• pp.185-192
• /
• 2005

This paper proposes a DRMS(Distribution Remote Management System) which can enhance highly the economics of automatic metering system and the power quality supplied to the electric customer improving the efficiency of the meter reading, voltage management and load management work by realizing the remote meter reading, the remote voltage management and the remote load management based on the ADWHM(Advanced Digital Watt Hour Meter). The DRMS is designed so that the voltage management and load management work in remote site can be processed by collecting the voltage pattern and current pattern as well as watt hour data from all ADWHMs one time every month regularly or from special ADWHMS several time irregularly, A new on-line voltage and load management strategy based on the ADWHM is designed by analyzing the existing voltage management and load management process. Also, DRMS is designed so that watt-hour data, voltage pattern data, load pattern data and power factor data can be collected selectively according to the selection of user to assist effectively the methodology. Remote management program and database of the DRMS are implemented based on Visual C++, MFC and database library of MS. Also, DRMS is designed so as to communicate with the ADWHM using RS232C-TCP/IP converter and ADSL. The effectiveness of the remote metering function is proven by collecting and analyzing the data after ADWHMs installed in any site. The developed strategy and program also is verified through the simulation of voltage management and load management.