• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.149-154
• /
• 2007

The engine behavior in a transient condition is important to not only emission regulations but also fuel economy. A fast response gas analyzer can be a useful tool to investigate exhaust gas in a transient operation. It should be designed to analyze gas concentration with a short time constant by a fast sampling module and an appropriate measuring method for each emission element. In this study, a new fast sampling module is introduced and flow analysis is performed by numerical simulation. The analysis has shown the proper operating condition and the sensitivity of the module for practical application. Calculated flow to the sampling module has $0.5{\sim}4%$ error, while backflow toward the expansion tube is expected when pressure in CP (Constant Pressure) chamber is over 0.6 bar. For a stable supply of flow to the optical cell, sample gas pressure should be in the range, $0.35{\sim}1.90$ bar, when the pressure in the CP camber and the optical cell are 0.2 bar and 0.158 bar, respectively.

• Journal of Korean Society for Quality Management
• /
• v.29 no.1
• /
• pp.113-127
• /
• 2001

Skip-lot sampling plans for lot-by-lot inspection are more desirable than the continuous sampling plans for units in modern mass production system under the condition of the submitted product is good. Perry(1973a, 1973b) extended the Dodge(1955)′s skip-lot sampling plans to single and two-level skip-lot sampling plans and Parker & Kessler (1981) modified Perry(1973a)′s plans so that a sample of size one is taken from every lot skipped during the skipping mode. In this paper, Perry(1973b)′s two-level skip-lot sampling plans are modified by applying Parker & Kessler′s plan, designated as MTSkSP1, MTSkSP2, MTSkSP3. Operating characteristic(OC) functions, average sample numbers(ASN) and average outgoing qualities(AOQ) for the proposed plans are derived using Markov chain properties and compared each other and Perry′s plans. The proposed plans not only reduce the ASN but also avoid the danger skipping lots entirely when the lots are produced during sudden "out-of-control".

• Journal of Applied Reliability
• /
• v.18 no.2
• /
• pp.122-129
• /
• 2018

Purpose: This article develops an optimal reliability acceptance sampling plan for the case where the degradation quantity of the performance characteristic follows Weibull distribution. Method: For developing reliability acceptance sampling plans, the sample size and the acceptance constant are determined based on the accelerated characteristic of the test condition and the product. Results: The sample size and the acceptance constant are provided such that the constraints of the producer and the consumer risks are satisfied. Conclusion: Reliability acceptance sampling plans based on the accelerated degradation test method can be used for the quality control within a resonable amount of cost and time. In this article. an optimal reliability sampling plans are newly developed for this purpose.

• Journal of Korean Society for Quality Management
• /
• v.23 no.4
• /
• pp.13-27
• /
• 1995

This paper considers the design of life test sampling plans based on Type II censored accelerated life tests. The lifetime distribution of products is assumed to be exponential. An estimator of acceleration factor between use condition stress and an accelerated level of stress higher than use condition stress is assumed to be known. The critical value for lot acceptance and the number of failure before censoring which satisfy the producer's and consumer's risk requirements are determined. The properties of the proposed life test sampling plans are investigated.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1829-1832
• /
• 2004

Closed loop stability of Extended Dynamic Matrix Control (EDMC) is investigated for limited sampling time. Linear approximation of the sensitivity functions is employed in the derivation of the stability condition. It is shown that the closed loop system will be stable if the control moves suppression coefficient ${\lambda}$ is taken arbitrarily large. Special cases such as M=P=1 and M=1, P>1 are discussed in more details.

• Communications of the Korean Mathematical Society
• /
• v.17 no.4
• /
• pp.731-740
• /
• 2002

We derive the generalized Hermite interpolation by using the contour integral and extend the generalized Hermite interpolation to obtain the sampling expansion involving derivatives for band-limited functions f, that is, f is an entire function satisfying the following growth condition ｜f(ｚ)｜$\leq$ A exp($\sigma$｜y｜) for some A, $\sigma$ > 0 and any ｚ=$\varkappa$ + iy∈C.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.6
• /
• pp.33-42
• /
• 1994

The sampling is inevitable in controlling the nonlinear continuous time system. This paper deals with digital feedback linearization problem which eliminates or reduces the effect of the sampling. Necessary and sufficient condition for reducing the sampling error up to O$(h^5)$ are obtained. Also, the effectiveness of our control scheme in accuracy and robustness is shown by comuter simulations.

• Water Engineering Research
• /
• v.1 no.3
• /
• pp.209-222
• /
• 2000

A spectral formalism was applied to quantify the sampling errors due to spatial and/or temporal gaps in soil moisture measurements. The lack of temporal measurements of the two-dimensional soil moisture field makes it difficult to compute the spectra directly from observed records. Therefore, the space-time soil moisture spectra derived by stochastic models of rainfall and soil moisture was used in their record. Parameters for both models were tuned with Southern Great Plains Hydrology Experiment(SGP'97) data and the Oklahoma Mesonet data. The structure of soil moisture data is discrete in space and time. A design filter was developed to compute the sampling errors for discrete measurements in space and time. This filter has the advantage in its general form applicable for all kinds of sampling designs. Sampling errors of the soil moisture estimation during the SGP'97 Hydrology Experiment period were estimated. The sampling errors for various sampling designs such as satedlite over pass and point measurement ground probe were estimated under the climate condition between June and August 1997 and soil properties of the SGP'97 experimental area. The ground truth design was evaluated to 25km and 50km spatial gap and the temporal gap from zero to 5 days.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.169-172
• /
• 2002

A vision sensor measure range data using laser light source. This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which feeds foster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

• Proceedings of the KWS Conference
• /
• 2002.05a
• /
• pp.49-52
• /
• 2002

A vision sensor measure range data using laser light source, This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which needs faster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.