• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.111-116
• /
• 2010

비상착륙상황에서 승객의 안전을 향상시키기 위한 내추락 설계는 회전익기 설계 개발에 있어 필수적이다. 특히, 추락 시 착륙장치는 상대적으로 많은 에너지를 흡수할 수 있기 때문에, 내추락 설계에 있어 중요한 역할을 한다. 군사규격에서는 착륙장치의 에너지 흡수능력 뿐만 아니라, 파손 후 동체를 뚫고 들어가 승객에게 2차 피해를 주지 않아야 함을 규정하고 있다. 이와 같은 군사규격을 만족하기 위해서는 파손장치와 같은 내추락 장치를 마련하여, 착륙장치가 파손 후 안전하게 붕괴되어 동체를 뚫고 들어가지 않도록 해야 한다. 본 연구에서는 회전익기 착륙장치에 필수적인 파손장치의 설계 및 설계개발시험을 수행하였다. 먼저 착륙장치가 동체를 뚫고 들어가지 않도록 하기 위한 붕괴 과정을 결정하였다. 다음으로 파손장치에서 가장 중요한 부품인 파손 핀을 설계하였고, 설계기준을 만족하도록 2가지 강도 범위로 설계되었다. 최종적으로 설계개발시험을 통해 파손장치 설계를 성공적으로 검증하였다.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 추계 학술논문발표회 논문집
• /
• pp.241-246
• /
• 1998

기어는 동력을 전달, 전환하고 있는 기계요소로 회전비의 선택이 자유롭고 확실한 전달비를 가지고 있어 기계회전계에 많이 이용되고 있다. 최근 산업이 고도로 발전함에 따라 기계회 전계는 고속, 고부하, 정밀화, 경량화가 요구되고 있으며, 기어구동계도 신뢰도, 정숙성, 효율향상, 내구성 등이 요구되고 있다. 최근에는 진동과 소음의 발생으로 인해 기어구동계의 많은 성능을 저하시키고 있어 저진동, 저소음 기어 개발이 시급한 실정이다. (중략)

• 한국안전학회지
• /
• 제12권3호
• /
• pp.17-22
• /
• 1997

This paper reals with the structure and function of duel mass flywheel. Damping effects of engine rotational fluctuation are compared with those of pre-damper clutch and duel mass flywheel and driven- system behavior is estimated engine idle r.p.m. The reason of gear rattle noise is higher in summer than winter and driving longer period than initial driving is due to affection by drag torque changing. The above-contents can be used on the design of clutch system and transmission matching including engine and duel mass flywheel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.807-809
• /
• 1998

Plant Protection Systems(PPS) are those systems that initiate safety actions to mitigate the consequences of design basis events by sending signals to Reactor Trip Switch Gear System(RTSS) and Engineered Safety Features-Component Control Systems(ESF-CCS). This paper illustrates distinctive features and improved design concepts of Korea Next Generation Reactor(KNGR) based on the experience obtained through prototyping of PPS.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.7-14
• /
• 2010

In order to analyze the vibro-impacts in the torsional system, several clearance types of nonlinearities should be included with the analytical or numerical method. These kinds of nonlinear factors can cause the errors while the system is calculated specifically with the numerical method, also it might take too long to get right answers with the every nonlinearity in the original system. Therefore, there are several methods developed for the sake of overcoming the deficiency of the analysis with the original system and saving the calculating time. The original system can be reduced by keeping the system characteristics such as from 14 to 6 DOF. Especially, since the torque flow in the torsional system is connected with the specific gear ratios, the original system can be transferred into the simpler system corresponding to each gear ratio rather than the original system, which can also show the same system characteristics such as the natural frequencies and the mode shapes. By using the reduced system, the calculating time can be saved and the redundant nonlinear effects for the system analysis can be ignored without any numerical errors.

• 해양환경안전학회지
• /
• 제13권3호
• /
• pp.229-234
• /
• 2007

현재 근해어업은 기피 산업으로 어민들의 고령화 및 감소로 인력을 구하기 어렵고 어로활동을 하기 위해서는 일반적으로 2명 이상이 1조로 작업이 진행된다. 따라서 숙련되지 못한 사람들이 조를 이루어 작업을 할 경우 의사전달에 시차가 생기고 한사람은 배의 조종에 매달리므로 작업의 능률이 떨어진다. 따라서 레저나 소형어선에서 1인이 선박을 조종하면서 작업이나 레저를 즐길 수 있는 선외기의 원격제어 시스템 연구의 필요성이 대두되었다. 본 연구에서는 작업의 효율을 높이고 인력을 절감 할 수 있는 선외기의 원격제어시스템에 관한 연구를 수행하였다. 선외기는 엔진, 조타기, 정 역전 및 중립 기어박스가 하나의 시스템으로 구성되어 있다. 소형 선외기에 이 세 가지의 제어를 직류전동기를 이용하여 위치제어와 속도제어를 하였고, 마이크로컨트롤러를 이용하여 조타기와 엔진회전수 제어를 프로그램화 하여 어민들이 작업을 하면서 동시에 원하는 조종을 할 수 있도록 시스템을 설계 제작하였다. 시운전결과 전속에서 좌 우현 조타 성능이 명령대로 잘 움직였다.

• 수산해양교육연구
• /
• 제27권4호
• /
• pp.1129-1135
• /
• 2015

The stow net is a stationary gear made from netting, usually in shape like trawl net without wings. The nets are fixed by means of anchors, placed according to the direction and strength of the current. And the commercial fishing is associated with high rate of fatal and non-fatal occupational injury. The hazard factors analysis for the fishermen's safety of offshore stow nets vessel was conducted to serve as a basic data for improving the healthy and safe working environment of fishermen using fishermen's occupational accidents of the national federation of fisheries cooperatives (NFFC) from 2012 to 2014 (n=1,144). As a result, the average occupational accident occurrence rate of this fishery was 206.9‰ in all industries 36.9 times the rate of that. In addition, average death and missing rate was found to have a very serious level management to 50.4‰ in all industries of death of 42.0 times. The accident occurred in 84.5 to 94.6% was happened at sea. The struck by object, slipping, contact with machinery, contact by object or gear and others occurred more frequently in order on the frequency of accident occurrence pattern. However, the occurrence rate of death and missing did not match the frequency of accident pattern. In other words, slipping occurred frequently higher while death and missing risk was not high. And the contact with fishing gear and fall in the waters was low while death and missing risk was high. The results are expected to contribute for identification and assessment of safety hazard occurred in offshore stow nets vessel.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1879-1882
• /
• 2005

Due to increase of demands on safety and convenience for automotive vehicle, the use of DC motor, such as power window, seat adjusting, pedal adjusting, sunroof, electric shift motor and so on, is increasing rapidly in the whole world. Worm gear is an important part to transmit torque to another gear in gear mechanism of automotive DC motor. But with current forming process, it has some problems in manufacturing and the quality. Also, the characteristics of automotive parts such as price and mass-production limit the quality improvement. Recently several methods are used in order to reduce a worm screw machining time and to maintain precision. In this paper, we introduce whirling tool machining and side milling cutter machining as effective manufacturing method of worm screw and study on the cutting force of side milling cutter and whirling tool in worm screw machining.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.28-33
• /
• 2014

Vibro ripper worked by high frequency vibration is developed to do rock fragmentation and work of ripper is the different concept with other existing breakers. The gear box-shank welded joint of vibro ripper is very important part to deliver vibromotive force to tooth, so this part should endure high frequency vibration environments. The purposes of this study are to choose the optimal welding conditions for fatigue strength. The conditions were made using three kind of shank materials and two kind of filler metals. Shank materials are Hadox-hituf, Posten80 and AR400, and filler metals are CSF-71T and CSF-81T. The fatigue test was conducted each condition. Fracture surface was observed to estimate fracture characteristics of welded joint using SEM.

• 소음진동
• /
• 제8권5호
• /
• pp.929-935
• /
• 1998

Safety diagnosis of electric train driving system is performed using vibration signals of running electric train. Safety diagnosis is tried on the viewpoints of the appreciation of superannuation and the fault diagnosis of motor, reduction gear and bogie. The appreciation of superannuation is checked by the vibration levels of driving parts and the fault diagnosis is done by analyzing the frequencies of the vibration signals which are measured directly from a running electric train. The results shows that the vibration levels of each parts increase as the train gets older and each parts have their own frequency patterns of the vibration. Vibration propagation path is also investigated using calculated the coherence value between bogie and driving system. As the results, it is known that vibration signal can be utilized successfully for the safety diagnosis of the driving part of electric train.