• 한국임상수의학회지
• /
• 제36권1호
• /
• pp.85-87
• /
• 2019

Eight-week-old Spot-billed duck were presented with visible drooping of both of wings. On physical examination, the Spot-billed ducks revealed valgus deformity of the carpal joint resulting in the primary flight feathers protruding dorsally. The bird was in good body condition and there was no loss of motion in any of the joints in the wings. The bird was fed chicken pellet with 18.5% of protein level and reared in a cage. Based on the clinical presentation and physical examination 'angel wing' was diagnosed. Wing bandage and nutritional change to lower-protein diet with fresh vegetables were applied simultaneously. And duck was transferred to wider outside pen with small pond. Four-week afterward clinical signs of angel wing were improved.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2449-2452
• /
• 2007

Hot spots on thin wafers of IC packages are becoming important issues in thermal and electrical engineering fields. To investigate these hot spots, we developed a Diode Temperature Sensor Array (DTSA) that consists of an array of 32 ${\times}$32 diodes (1,024 diodes) in a 8 mm ${\times}$ 8 mm surface area. To know specifically the hot spot temperature which is affected by the chip thickness and a generated power, we made the DTSA chips, which have 21.5 ${\mu}m$, 31 ${\mu}m$, 42 ${\mu}m$, 100 ${\mu}m$, 200 ${\mu}m$, and 400 ${\mu}m$ thickness using the CMP process. And we conducted the experiment using various heater power conditions (0.2 W, 0.3 W, 0.4 W, 0.5 W). In order to validate experimental results, we performed a numerical simulation. Errors between experimental results and numerical data are less than 4%. Finally, we proposed a correlation for the hot spot temperature as a function of the generated power and the wafer thickness based on the results of the experiment. This correlation can give an easy estimate of the hot spot temperature for flip chip packaging when the wafer thickness and the generated power are given.

• 한국광학회지
• /
• 제11권6호
• /
• pp.390-394
• /
• 2000

사람의 홍채 인식을 통항 보안 통제를 하기 위한 광학계를 설계하였다. 이 렌즈는 종색수차와 Petzval sum을 최소로 하는 triplet형이다. 초점거리를 50mm 유효경을 10mm로 하였고 물체로부터 상까지의 거리는 200mm-300mm로 고려하였다. 눈을 고려한 전체 광학계의 성능은 ray-fan과 spot diagram 그리고 회절광학적인 MTF를 계산하여 평가하였다. 홍채의 크기를 고려하여 물체 높이 0mm, 4mm 그리고 6mm 에 대하여, 파장은 Fraunhofer C, d 및 F-line에 대하여 모두 계산한 결과 spot 크기는 0.05mm 직경을 벗어나지 않았고 MTF 값도 물체 높이 6mm에 대한 486mm 파장의 sagittal MTF를 제외하고는 20 lines/mm의 공간주파수에서 0.5이상이 되었다.

• 식물병연구
• /
• 제9권3호
• /
• pp.166-169
• /
• 2003

고추재배에서 갈색점무늬병에 의한 반점 황화 조기낙엽 등의 피해로 수량감소를 일으키고 있어, 이 병해에 대한 저항성 육종을 위해서 병원균의 인위접종에 의한 발병조건을 확립하고자 한다. 본 실험 결과, 발병온도는 접종 후 야간 15~$20^{\circ}C$/주간 20~$25^{\circ}C$에서 습실을 경과하는 것이 발병이 가장 양호하였다. 접종묘령은 접종 후 병반 형성수가 많으면서 낙엽이 적게되는 30~40일 유묘가 발병이 가장 좋았다. 고추 유묘에 포자현탁액으로 접종할 경우 3.4 ${\times}$ $10^5$ conidia/ml 농도가 적당하며 접종 후 병반수로 저항성 정도를 조사할 때 20일까지 적당하였다.

• The Plant Pathology Journal
• /
• 제26권2호
• /
• pp.178-184
• /
• 2010

Four major diseases of chili pepper including two fungal diseases, anthracnose (Colletotrichum acutatum) and Phytophthora blight (Phytophthora capsici), and two bacterial diseases, bacterial wilt (Ralstonia solanacearum) and bacterial spot (Xanthomonas campestris pv. vesicatoria), were investigated under future climate-change condition treatments in growth chambers. Treatments with elevated $CO_2$ and temperature were maintained at $720ppm{\pm}20ppm$ $CO_2$ and $30^{\circ}C{\pm}0.5^{\circ}C$, whereas ambient conditions were maintained at $420ppm{\pm}20ppm$ $CO_2$ and $25^{\circ}C{\pm}0.5^{\circ}C$. Pepper seedlings or fruits were infected with each pathogen, and then the disease progress was evaluated in the growth chambers. According to paired t-test analyses, bacterial wilt and spot diseases significantly increased by 24% (p=0.008) and 25% (p=0.016), respectively, with elevated $CO_2$ and temperature conditions. On the other hand, neither Phytophthora blight (p=0.906) nor anthracnose (p=0.125) was statistically significant. The elevated $CO_2$ and temperature accelerated the progress of bacterial wilt by two days and bacterial spot by one day compared to the ambient treatment. Temperature regime studies of the diseases without changes in $CO_2$ confirmed that the accelerated bacterial disease progress was mainly due to the increased temperature rather than the elevated $CO_2$ conditions.

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.99-105
• /
• 2007

본 논문에서는 초 중 고등학교 전기시설물을 대상으로 전기안전에 대한 현장조사를 하였다. 현장조사는 수전설비, 교실, 과학실 및 음악실 등을 대상으로 연구원, 경력 15년 이상의 전기기술자 및 기타 관련 전문가에 의해 전국적으로 수행하였다. 41개 학교를 대상으로 현장조사를 실시한 결과, 수전설비의 접지방식은 공통접지방식이 지배적이었다. 위험요소로는 선풍기 조절기함의 부재, 실험대 전원의 인체보호용 누전차단기의 미설치, 비접지 콘센트의 사용 등으로 나타났다.

• 한국안전학회지
• /
• 제21권5호
• /
• pp.17-21
• /
• 2006

In this study, SPCC cross-tension type specimens produced under various spot welding conditions were tensile and fatigue tested. Decrease of 2 kA in normal current condition of 10 kA caused a large amount of reduction in both static joining strength and fatigue life. And 2 kA increase resulted in increase of static joining strength and an increase in low cycle regime but a decrease in high cycle regime, revealing the fact that fatigue strength rather than static joining strength would be a major factor during design process in view of the body endurance. As a results of estimating the fatigue lifetimes of various types of spot weld specimens. equivalent stress intensity factor is the proper parameter for predicting the lifetimes of various types of specimens. which can be expressed as ${\Delta}K_{eq}(N/nm^{1.5})=11550N^{-0.36}_{f}$.

• The Plant Pathology Journal
• /
• 제17권3호
• /
• pp.180-183
• /
• 2001

A corynespora leaf spot of pepper, which has not been reported previously in Korea, occurred severely at the major pepper cultivation area of Chinju, Gyeongnam province in 2001. Infection rate ranged from 48.2 to 84.7% in eight fields surveyed. The causal fungus was identified as Corynespora cassicola based on the following cultural and morphological characteristics. The fungi grew well on potato dextrose agar, showing gray to brown color with cultural age. Conidia formed solitary or catenary were obclavate to cylindrical in shape, and pale olivaceous brown or brown in color. They had 420 pseudoseptate and isthmus, and measured 42.7-197.6 x 9.3-$23.5\mu\textrm{m}$. Septate conidiophores were pale to light brown in color, and measured 116.5-836.0 x 4.2-$11.0\mu\textrm{m}$. Conidia germinated as a bi-polar type. Optimal temperature for mycelial growth and conidial germination was $30^{\circ}$ and 25-$30^{\circ}$, respectively. The fungus showed strong pathogenicity to pepper plant, and the symtoms on pepper by the artificial inoculation were similar to those observed in the field. This is the first report on the corynespora leaf spot on pepper (Capsium annuum) caused by Corynespora cassicola in Korea.

• 조명전기설비학회논문지
• /
• 제27권5호
• /
• pp.89-94
• /
• 2013

The fire testing performed for smoke detector model approval in Korea tests only one kind of fire smoke. A photoelectric spot-type smoke detector using Mie scattering is affected by the wavelength of light beam and the particle diameter. According to UL (Underwriters Laboratories Inc.) 268 standard, this paper analyze the characteristic of the response for a photoelectric spot-type smoke detector on sale in Korea using various fire smokes. Probability that the response time is included in non-defective range is 100% in paper fire, 90% in wood fire and 75% in flammable liquid fire, 90% in wood fire and 75% in flammable liquid fire. According to the estimation for population mean of the response time choosing a confidence level of 99%, a maximum of 19% for wood fire and that of 38% for flammable liquid fire are defective. As the result of analysis of smoke particle, this paper is found that these results are caused by the smoke particles are wide variations in size or have very black.

• Korean Chemical Engineering Research
• /
• 제45권1호
• /
• pp.12-16
• /
• 2007

Copper-Zinc Oxide를 촉매로 사용하는 메탄올 자열 개질 반응기의 온도제어 연구를 하였다. 반응기 hot-spot에서 1 cm 벗어난 지점의 반응기 내부 온도를 피제어변수로, 공기 유량을 조작변수로 사용하였다. 일차 시간 지연 모델을 얻었으며, 이로부터 IMC-PI 법을 적용하여 제어기 값을 구할 수 있었다. 이 제어기로 100시간 이상 개질 반응기 내부의 온도를 ${\pm}5^{\circ}C$ 내에서 제어할 수 있었다. 촉매활성의 저하로 인한 hot-spot 지점의 변화를 조사하여, 적응 제어의 설계에 이용할 수 있게 하였다.