• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권9호
• /
• pp.3782-3796
• /
• 2020

A three-dimensional (3D) reconstruction is an important research area in computer vision. The ability to detect and match features across multiple views of a scene is a critical initial step. The tracking matrix W obtained from a 3D reconstruction can be applied to structure from motion (SFM) algorithms for 3D modeling. We often fail to generate an acceptable number of features when processing face or medical images because such images typically contain large homogeneous regions with minimal variation in intensity. In this study, we seek to locate sufficient matching points not only in general images but also in face and medical images, where it is difficult to determine the feature points. The algorithm is implemented on an adaptive threshold value, a scale invariant feature transform (SIFT), affine SIFT, speeded up robust features (SURF), and affine SURF. By applying the algorithm to face and general images and studying the geometric errors, we can achieve quasi-dense matching points that satisfy well-functioning geometric constraints. We also demonstrate a 3D reconstruction with a respectable performance by applying a column space fitting algorithm, which is an SFM algorithm.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권3호
• /
• pp.195-198
• /
• 2002

In this note, we suggest a new matching condition and extend the stability analysis to the ultimate boundness of state $\chi$(t) for uncertain input-delay systems, using a sliding control with delay compensation.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.300-306
• /
• 2000

This paper introduces a new concept of automation for bio-production with tele-operative system. The proposed system showed practical and feasible way of automation for the volatile bio-production process. Based on the proposition, recognition of the job environment with object identification was performed using computer vision system. A man-machine interactive hybrid decision-making, which utilized a concept of tele-operation was proposed to overcome limitations of the capability of computer in image processing and feature extraction from the complex environment image. Identifying watermelons from the outdoor scene of the cultivation field was selected to realize the proposed concept. Identifying watermelon from the camera image of the outdoor cultivation field is very difficult because of the ambiguity among stems, leaves, shades, and especially fruits covered partly by leaves or stems. The analog signal of the outdoor image was captured and transmitted wireless to the host computer by R.F module. The localized window was formed from the outdoor image by pointing to the touch screen. And then a sequence of algorithms to identify the location and size of the watermelon was performed with the local window image. The effect of the light reflectance of fruits, stems, ground, and leaves were also investigated.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.1018-1019
• /
• 2023

목 아래로 전신마비가 되어 간병인 없이는 일상적인 생활이 불편한 와병 환자들을 위하여 뇌파(EEG) 및 목의 근전도(EMG)와 같은 생체신호 기반의 인터페이스를 제안하였다. 이를 이용하여 환자의 이상 상태를 보호자에게 알릴 수 있고 환자의 제한적인 움직임이나 집중하는 것만으로도 간단한 서비스 등을 직접 로봇에게 명령을 내릴 수 있도록 구현하였다.

• 제어로봇시스템학회논문지
• /
• 제21권12호
• /
• pp.1178-1184
• /
• 2015

In conventional robotics, charge-coupled device (CCD) and complementary metal-oxide-semiconductor (CMOS) cameras have been utilized for acquiring vision information. These devices have problems, such as narrow optic angles and inefficiencies in visual information processing. Recently, biomimetic vision sensors for robotic applications have been receiving much attention. These sensors are more efficient than conventional vision sensors in terms of the optic angle, power consumption, dynamic range, and redundancy suppression. This paper presents recent research trends on biomimetic vision sensors and discusses future directions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1484-1487
• /
• 1996

An Automatic coking control system was developed to achieved substantial energy and labor savings through the stabilization and optimization of coke oven operation. With the aim of saving energy and labor, the coke department has been advanced automation and systematization. A typical examples of automation is Center Position Control System(CPCS) for coke oven. This system is proved effective in improvement of center position accuracy.

• International Journal of Control, Automation, and Systems
• /
• 제3권4호
• /
• pp.648-648
• /
• 2005

• 디지털융복합연구
• /
• 제17권9호
• /
• pp.199-212
• /
• 2019

디지털화(Digitalization)가 우리의 비즈니스 환경에 다양한 변화와 혁신을 일으키고 있다. 제조업에서는 오래전부터 자동화를 위해 로봇을 활용하여 처리속도 및 품질에 혁신을 이루었다. RPA는 이러한 제조현장의 혁신을 사무공간으로 가져온 것이라고 할 수 있다. 본 연구의 목적은 사무공간에서 단순 반복적으로 이루어지는 업무에 대해 생산성을 향상시키는 것을 그 목적으로 한다. 이러한 생산성 향상과 관련하여, 비즈니스 자동화(Business Automation)에 대한 개념을 살펴본 후, 비즈니스 문서 작업과 관련하여 자동화의 가능성을 확인하기 위해 5가지 업무영역을 대상으로 애자일 방법론을 활용하여 시뮬레이션을 수행하였다. 결론적으로, 품질점검 관련 97.3%, 편집 디자인 관련 31.7%의 생산성 향상이 가능함을 확인하였으며, 실제 업무에 적용하기 위한 방향성에 대해서도 살펴보았다. 향후 연구에서는 이러한 결과를 바탕으로 IPA(Intelligent Process Automation)의 적용방안에 대해 진행하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.11-16
• /
• 1997

This paper describes the grenade counting system developed for DPICM submunition analysis using the infrared video streams, and its some video stream processing technique. The video stream data processing procedure consists of four sequences; Analog infrared video stream recording, video stream capture, video stream pre-processing, and video stream analysis including the grenade counting. Some applications of this algorithms to real bursting test has shown the possibility of automation for submunition counting.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2020년도 춘계학술발표대회
• /
• pp.330-333
• /
• 2020

장신구 산업은 인건비의 비중이 높고 노동자의 역량에 따라 제품의 제작 작업 시간 및 품질의 편차가 심하다. 이에 산업계의 수요에 맞추어 실리콘 금형 표면 지름 0.75mm 홀에 이어핀을 삽입하는 공정을 자동화하기 위하여 삽입 자동화 시스템이 개발되고 있다. 본 논문에서는 이어핀 삽입 자동화시스템에서 적용할 수 있는 템플릿 매칭 방법과 관심 영역 레이블링을 통한 홀 판별 방법을 제안한다. 제안한 방법의 안정성을 확보하기 위하여 실험을 통해 최적의 매칭 방법과 이진화 기법을 적용하였으며 이어핀 홀의 좌표를 확보하여 X-Y 정밀 이송 시스템에 적용할 수 있다.