• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.71-78
• /
• 2007

There have been continuous efforts to automate welding processes. This automation process could be said to fall into two categories, weld seam tracking and weld quality evaluation. Recently, the attempts to achieve these two functions simultaneously are on the increase. For the study presented in this paper, a vision sensor is made, and using this, the 3 dimensional geometry of the bead is measured in real time. For the application in welding, which is the characteristic of nonlinear process, a fuzzy controller is designed. And with this, an adaptive control system is proposed which acquires the bead height and the coordinates of the point on the bead along the horizontal fillet joint, performs seam tracking with those data, and also at the same time, controls the bead geometry to a uniform shape. A communication system, which enables the communication with the industrial robot, is designed to control the bead geometry and to track the weld seam. Experiments are made with varied offset angles from the pre-taught weld path, and they showed the adaptive system works favorable results.

• 한국게임학회 논문지
• /
• 제20권3호
• /
• pp.85-94
• /
• 2020

작업자-로봇 간 협업은 다품종 소량생산 기반의 스마트팩토리에서 중요한 요소가 된다. 기존 제조 공장을 스마트화하기 위해 AI 기반의 기술이 도입되고 있지만 이 경우 단기적 생산성 향상에 그친다. 이를 해결하기 위한 협업 지성은 인간의 팀워크, 창의력 등과 AI의 속도, 정확성 등이 결합되어 서로의 단점을 적극적으로 보완 할 수 있다. 그러나 현재 자동화설비는 돌발사태 발생 시 재해강도가 높기 때문에 안전대책이 요구된다. 따라서 본 논문에서는 깊이 영상 카메라를 이용하여 작업자 및 설비를 가상 세계에 구현하고, 시뮬레이션을 통해 작업자의 안전을 판별하는 공장 안전 제어 시스템을 설계하고 구현한다.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.101-110
• /
• 2018

This paper introduces feedback linearization (FL) based adaptive sliding mode control (ASMC) effective against ground effects of the quadrotor UAV. The proposed control has the capability of estimation and effective rejection of those effects by adaptive mechanism, which resulting stable attitude and positioning of the quadrotor. As output variables of quadrotor, x-y-z position and yaw angle are chosen. Dynamic extension of the quadrotor dynamics is obtained for terms of roll and pitch control input to be appeared explicitly in x-y-z dynamics, and then linear feedback control including a ground effect is designed. A sliding mode control (SMC) is designed with a class of FL including higher derivative terms, sliding surfaces for which is designed as a class of integral type of resulting closed loop dynamics. The asymptotic stability of the overall system was assured, based on Lyapunov stability methods. It was evaluated through some simulation that attitude control capability is stable under excessive estimation error for unknown ground effect and initial attitude of roll, pitch, and yaw angle of $30^{\circ}$ in all. Effectiveness of the proposed method was shown for quadrotor system with ground effects.

• 국제학술발표논문집
• /
• The 10th International Conference on Construction Engineering and Project Management
• /
• pp.1073-1080
• /
• 2024

The imperative for real-time automatic construction progress monitoring (ACPM) to avert project delays is widely acknowledged in construction project management. Current ACPM methodologies, however, face a challenge as they rely on collecting data from construction sites and processing it offline for progress analysis. This delayed approach poses a risk of late identification of critical construction issues, potentially leading to rework and subsequent project delays. This research introduces a real-time construction progress monitoring framework that integrates cutting-edge semantic Simultaneous Localization and Mapping (SLAM) techniques. The innovation lies in the framework's ability to promptly identify structural components during site inspections conducted through a robotic system. Incorporating deep learning models, specifically those employing semantic segmentation, enables the system to swiftly acquire and process real-time data, identifying specific structural components and their respective locations. Furthermore, by seamlessly integrating with Building Information Modeling (BIM), the system can effectively evaluate and compare the progress status of each structural component. This holistic approach offers an efficient and practical real-time progress monitoring solution for construction projects, ensuring timely issue identification and mitigating the risk of project delays.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1211-1214
• /
• 1992

본 논문에서 제안한 Fara DS Series의 AC SERVO (DC BRUSHLESS) MOTOR 제어기는 ROBOT, CNC, 각종 공작기계및 FA기기에서 MOTOR를 구동 원으로 사용하는데 사용되는 제품이다. AC SERVO MOTOR DRIVE의 Inverter에 IGBT(Insulated Gate Bipoler Transistor)를 사용하여 Switching 주파수를 높임으로써 Motor를 가변속 제어할때 발생하는 소음 및 진동을 극소화 하였다. 또한 일반적으로 Motor 속도제어를 급감속으로 제어할때 Servo Motor의 비선형 특성으로 인한 전류위상을 보상하여 모든 동작구간에서 최적의 상태의 제어가 되도록 개발하였다. 그리고 다양한 User Option 기능을 내장하여 User가 원하는 제어대상에 효과적으로 적용할 수 있도록 하였다. 아울러 MOTOR 제어기에 내장 된 다수의 보호기능을 통해서 Motor운전중 발생하는 이상상태에 대해 제어기를 보호할 수 있도록 하였다. 제안한 제어기는 부하변동, 전압변동, 온습도변동에 대해 속도변동율을 최소화 함으로써 ROBOT, CNC등 FA분야에서 폭넓게 이용할수 있다.

• 한국정보전자통신기술학회논문지
• /
• 제12권2호
• /
• pp.170-177
• /
• 2019

본 논문에서는 4족복 보행 로봇의 주행 안정성을 개선하기 위한 3가지 이론을 제시한다. 첫 번째는 Minimum-Jerk Trajectory를 이용하여 다리궤적을 최적화 시킨다. 두 번째는 본 논문에서 새롭게 제시한 사인파와 기존의 방식인 LSM을 Jerk값에 근거하여 비교한다. 셋째는 ADAMS-MATLAB co-simulation을 이용하여 반복적인 로봇 시뮬레이션을 통해 스웨이의 최적 보폭을 계산한다. 위의 과정을 통해 로봇의 보행 개선점을 기존의 이론과 비교하여 나타내었다. 첫 번째로 정 보행시 몸체와 타원형태의 다리 끝의 움직임에 Minimum-Jerk trajectory를 사용하여 다리궤적이 급격하게 변하는 지점의 평균 기울기를 최소 1.2에서 최대 2.9까지 감소시켜 지면에 다리 끝점이 도달할 때 충격을 최소화하여 안정성을 증가 하였다. 두 번째로 기존 LSM(Longitudinal Stability Margin)기법과 본 논문에서 제시한 사인파형 Sway를 사용하여 비교한 결과 평균 Jerk를 Z축에서 0.019, X축에서 0.457, Y축에서 0.02, 3D는 0.479 만큼 감소 시켰다. 특히 X축 Jerk는 크게 감소 하였다. 셋째로 로봇이 최소 Jerk 값으로 보행하기 위한 최적의 보폭의 길이를 상기 분석을 통해 도출하였으며 그 결과 20cm보폭 길이가 가장 안정적이었다.

• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.142-148
• /
• 2003

Reinforcement learning is considered as an important tool for robotic learning in unknown/uncertain environments. In this paper, we propose an evaluation function expressed in a vector form to realize multi-dimensional reinforcement learning. The novel feature of the proposed method is that learning one behavior induces parallel learning of other behaviors though the objectives of each behavior are different. In brief, all behaviors watch other behaviors from a critical point of view. Therefore, in the proposed method, there is cross-criticism and parallel learning that make the multi-dimensional learning process more efficient. By ap-plying the proposed learning method, we carried out multi-dimensional evaluation (reward) and multi-dimensional learning simultaneously in one trial. A special neural network (Q-net), in which the weights and the output are represented by vectors, is proposed to realize a critic net-work for Q-learning. The proposed learning method is applied for behavior planning of mobile robots.

• International Journal of Control, Automation, and Systems
• /
• 제1권4호
• /
• pp.474-483
• /
• 2003

Belt drives provide freedom to position the motor relative to the load and this phenomenon enables reduction of the robot arm inertia. It also facilitates quick response when employed in robotics. Unfortunately, the flexible dynamics deteriorates the positioning accuracy. Therefore, there exists a trade-off between the simplicity of the control strategy to reject time varying disturbance caused by flexibility of the belt and precision in performance. Resonance of the system further leads to vibrations and poor accuracy in positioning. In this paper, accurate positioning of a belt driven mechanism using a feed-forward compensator under maximum acceleration and velocity constraints is proposed. The proposed method plans the desired trajectory and modifies it to compensate delay dynamics and vibration. Being an offline method, the proposed method could be easily and effectively adopted to the existing systems without any modification of the hardware setup. The effectiveness of the proposed method was proven by experiments carried out with an actual belt driven system. The accuracy of the simulation study based on numerical methods was also verified with the analytical solutions derived.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.390-396
• /
• 2013

Due to the development of technology, there is a considerable increase in the number of skyscrapers in the world. Accordingly, there are rapid growing requests about maintenances such as cleaning, painting, and inspection. However, it is extremely dangerous working the walls of buildings, and crashes from buildings have accounted for large proportion of constructional accidents. Especially, as the number of buildings with irregular shapes increases, the accident rate during the maintenance work increases each year, and most of the accidents lead to death. An alternative solution must be developed with the commercialization of automatic systems. In this research, a fundamental research has been conducted for drafting and commercializing an automation tool that is carried in the built-in guide system, which can perform cleaning.

• 국제초고층학회논문집
• /
• 제11권2호
• /
• pp.115-124
• /
• 2022

Welding is a significant part of the construction industry. Since most high-rise building construction structures rely on a robust metal frame welded together, welding defect can damage welded structures and is critical to safety and quality. Despite its importance and heavy usage in construction, the labor shortage of welders has been a continuous challenge to the construction industry. To deal with the labor shortage, the ultimate goal of this study is to design and develop an automated robotic welding system composed of a welding machine, unmanned ground vehicle (UGV), robotic arm, and visual sensors. This paper proposes and focuses on automated weaving using the robotic arm. For automated welding operation, a microcontroller is used to control the switch and is added to a welding torch by physically modifying the hardware. Varying weave patterns are mathematically programmed. The automated weaving is tested using a brush pen and a ballpoint pen to clearly see the patterns and detect any changes in vertical forces by the arm during weaving. The results show that the weave patterns have sufficiently high consistency and precision to be used in the actual welding. Lastly, actual welding was performed, and the results are presented.