• 반도체디스플레이기술학회지
• /
• 제20권1호
• /
• pp.113-117
• /
• 2021

A composite active layer was designed based on graphene quantum dots, which is a low-dimensional structure, and a heterogeneous active layer of graphene quantum dots was applied to the interfacial defect structure to overcome the limitations. Increasing to 1.5~3.5 wt % PVP GQD, Vf changed from 2.16 ~ 2.72 V. When negative deflection is applied to the lower electrode, electrons travel through the HfOx/ITO interface. The Al + ions are reduced and the device dominates at low resistance. In addition, as the PVP GQD concentration increased, the depth of the interfacial defect decreased, and the repetition of appropriate electrical properties was confirmed through Al and HfOx/ITO. The low interfacial defects help electrophoresis of Al+ ions to the PVP GQD layer and the HfOx thin film. A local electric field increase occurred, resulting in the breakage of the conductive filament in the defect.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1745-1747
• /
• 2004

In order to anticipate gradual increase of fault current in electric power systems, current limiting technology and current limiting device has been investigated for a long time. But the commercial use of current limiting device was delayed due to the lack of effective method to insert impedance to the elective power systems without loss and surplus defects. However, novel current limiting device, which use superconducting materials, was considered as a dream technology to be applied in a distribution and transmission lines. LG Industrial systems and KERPI started to investigate resistive type superconducting fault current limiters in order to develop 154kV fault current limiters and this year, we succeed to test 3 phase 6.6kV/200A fault current limiters. Based on these achievements, 24kV superconducting fault current limiters will be realized withing 3 years which could be tested in a real fields. In this paper, the developments of fault current limiting module which use YBCO thin films, cryogenic systems, the structure and construction of 3 phase fault current limiters and finally the test results of 6.6kV superconducting fault current limiters will be introduced.

• 한국전자파학회논문지
• /
• 제28권5호
• /
• pp.430-433
• /
• 2017

본 논문은 0.25 um GaN HEMT 공정을 이용하여 S/C/X-대역에서 저항 피드백 구조의 저잡음 증폭기 MMIC에 관한 연구이다. GaN 소자는 높은 항복 전압과 에너지 밴드갭 그리고 고온에서 안정성을 갖는 고출력 소자로서 장점을 가진다. 따라서 높은 선형성을 가지는 GaN 소자를 이용한 수신기는 리미터 없이 구현할 수 있기 때문에 수신기의 잡음 지수가 개선되고, 수신기 모듈의 크기를 줄일 수 있다. 제안한 GaN 저잡음 증폭기 MMIC는 S/C/X-대역에서 15 dB 이상의 이득, 3 dB 이하의 잡음 지수, 13 dB 이상의 입력 반사 손실, 그리고 8 dB 이상의 출력 반사 손실을 가진다. GaN 저잡음 증폭기 MMIC는 드레인 전압 20 V, 게이트 전압 -3 V일 때, 70 mA의 전류를 소모한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.174-174
• /
• 2014

Memristor devices are one of the most promising candidate approaches to next-generation memory technologies. Memristive switching phenomena usually rely on repeated electrical resistive switching between non-volatile resistance states in an active material under the application of an electrical stimulus, such as a voltage or current. Recent reports have explored the use of variety of external operating parameters, such as the modulation of an applied magnetic field, temperature, or illumination conditions to activate changes in the memristive switching behaviors. Among these possible choices of signal controlling factors of memristor, photon is particularly attractive because photonic signals are not only easier to reach directly over long distances than electrical signal, but they also efficiently manage the interactions between logic devices without any signal interference. Furthermore, due to the inherent wave characteristics of photons, the facile manipulation of the light ray enables incident light angle controlled memristive switching. So that, in the tautological sense, device orienting position with regard to a photon source determines the occurrence of memristive switching as well. To demonstrate this position controlled memory device functionality, we have fabricated a metal-semiconductor-metal memristive switching nanodevice using ZnO nanorods. Superhydrophobicity employed in this memristor gives rise to illumination direction selectivity as an extra controlling parameter which is important feature in emerging. When light irradiates from a point source in water to the surface treated device, refraction of light ray takes place at the water/air interface because of the optical density differences in two media (water/air). When incident light travels through a higher refractive index medium (water; n=1.33) to lower one (air; n=1), a total reflection occurs for incidence angles over the critical value. Thus, when we watch the submerged NW arrays at the view angles over the critical angle, a mirror-like surface is observed due to the presence of air pocket layer. From this processes, the reversible switching characteristics were verified by modulating the light incident angle between the resistor and memristor.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.977-981
• /
• 1998

Si 기판의 온도를 200에서 $500^{\circ}C$까지 변화시켜가면서 고집저 소자의 금속배선으로 응용되고 있는 저저항의 텅스텐 박막을 플라즈마 화학증착 방법에 의해 제작하였다. 이렇게 증착된 텅스텐 박막의 비저항은 $H_2/WF_6 $ 가스의 분압비에 따라 매우 민감하게 작용하는 것을 알 수있다. 플라즈마 밀도가 $0.7W/\textrm{cm}^2$ 이하에서는 박막내에 존재하는 잔류응력이 $2.4\times10^9dyne/\textrm{cm}^2$ 이하이다. 그러나 1.8에서 $2.7W/\textrm{cm}^2$로 증가함에 따라 잔류응력은 $8.1\times10^9$에서 $1.24\times10^{10}dyne/\textrm{cm}^2$로 갑자기 증가하는데 이는 박막을 증착할 때에 플라즈마 밀도가 증가하면 이온이나 radical bombardment 의 영향 때문이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.497-500
• /
• 1999

This paper reports on the fabrication and characteristics of recessed gate GaN MESFETs fabricated using a photoelectrochemical wet etching method. The unique etching process utilizes photo-resistive mask and KOH based etchant. GaN MESFETs with successfully recessed gate structure was characterized in terms of dc and RF performance. The fabricated GaN MESFET exhibits a current saturation at $V_{DS}$ = 4 V and a pinch-off at $V_{GS}$ =-3V The peak drain current of the device is about 230mA/mm at 300 K and the value is remained almost same for 500K operation. The $f_{T}$ and $f_{max}$ from the device are 6.357Hz and 10.25 GHz, respectively.y.y.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.230-237
• /
• 2022

A technology that allows users to feel the elasticity of fabric through force feedback in the fashion and textile fields is very helpful to related manufacturing and sales areas. Currently bundle of fabrics, so called Swatch, is the only available way for the designer, manufacturer and the end-user to feel the fabrics. Images and video clips provide only visual characteristics, hence touch and stiffness are also very important characteristics to check beforehand. A study is conducted on a haptic device, which estimates the amount of change in the length of the virtual fabric and generates resistive force so that the user could feel the fabric stiffness. Since cables that can only transmit the tensile force are used, a force realization method is proposed, and it is verified numerically and experimentally.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1222-1225
• /
• 1997

A gaseous oxygen detector has been developed in a configuration of Pd-$SnO_x$-$Si_3N_4$-$SiO_2$-Si-Al with highly resistive $SnO_x$ layer as the oxygen adsorptive element. In this paper, we present the characteristics of the device in response to oxygen adsoption/desorption under applied d.c. bias. Experimental results showed that the oxygen adsorptive response by the device was reduced significantly under a positive gate bias, for all experimental regions of $O_2$ partial pressure. On the other hand, the application of a negative gate bias increased the device's adsorptive response of oxgyen. A device model concerning this electroadsorption/desorption behavior of the device is provided.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.97-100
• /
• 2005

Dynamic response of organic light-emitting diodes were analyzed in $ITO/Alq_3$(100 nm)/Al device structure with a variation of voltage an frequency. At low frequency region, complex impedance is mostly governed by resistive component, and at high frequency region by capacitive component. Also, we have evaluated resistance, capacitance and permittivity of devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2385-2387
• /
• 2002

종래 도로상의 차량검지기들은 기후변화 및 도로환경의 변화, 물리적인 변화에 영향을 받아 감지의 정확도가 떨어져 신뢰도 높은 교통정보를 생성하기가 어렵고, 제품의 가격이 고가이며, 설치 및 유지, 보수에 많은 비용과 인력이 요구된다. 본 연구에서는 종래의 차량 검지기가 지니는 문제점들을 해결하여 어떠한 환경하에서도 신뢰성 있는 차량 주행정보를 제공하며 동시에 유지, 보수 비용이 저렴한 검지기로서 AMR(Anisotropic Magneto-Resistive) 센서를 이용하여 도로상의 차량 이동에 따른 지구자기장(Earth Magnetic Field) 변화를 감지하고 차량의 이동상태를 파악하는 교통량 계측장치를 제시한다.