• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.306-310
• /
• 2004

In this paper, we consider the Ring Loading Problem with integer demand splitting (RLP). The problem is given with a ring network, in which a required traffic requirement between each selected node pair must be routed on it. Each traffic requirement can be routed in both directions on the ring network while splitting each traffic requirement in two directions only by integer is allowed. The problem is to find an optimal routing of each traffic requirement which minimizes the capacity requirement. Here, the capacity requirement is defined as the maximum of traffic loads imposed on each link on the network. We formulate the problem as an integer program. By characterizing every extreme point solution to the LP relaxation of the formulation, we show that the optimal objective value of the LP relaxation is equal to p or p+0.5, where p is a nonnegative integer. We also show that the difference between the optimal objective value of RLP and that of the LP relaxation is at most 1. Therefore, we can verify that the optimal objective value of RLP is p+1 if that of the LP relaxation is p+0.5. On the other hand, we present a strengthened LP with size polynomially bounded by the input size, which provides enough information to determine if the optimal objective value of RLP is p or p+1.

• 한국정보통신학회논문지
• /
• 제15권9호
• /
• pp.2050-2058
• /
• 2011

본 논문은 항공기의 항공 전자에 내장된 비행운용프로그램을 개발하기 위한 요구도 관리 시스템을 제시한다. 제시된 시스템은 비행운용프로그램을 개발하기 위한 요구사항분석, 설계, 구현 테스트결과와 요구도 수정 로그 등을 효과적으로 관리한다. 기존의 상업용 요구도 관리시스템은 보다 다양한 기능을 가지고 있지만 이들 대부분의 도구들은 너무 복잡하고 상대적으로 구입가격이 비싸며 유지보수 비용이 크다. 본 논문에서 개발된 시스템은 항공전자 장비 비행운용프로그램 개발에 특화된 시스템으로서 사용의 용이성과 비용 면에서 효율적인 시스템이다.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.1-10
• /
• 2015

ISO 9001, quality management system, is widely known as advancing internal efficiency and productivity in various industry. As a result, the number of companies that have adopted ISO 9001's certification have been increasing continuously year by year since ISO 9000' family standard was published in 1987s. This fact shows that a lot of businesses are trying to get the accreditation for improving the competitiveness of quality. The purpose of this study is to present that ISO 9001's certification motives affect to the requirement's implementation and show that the execution of requirements influences on management performance in the small manufacturer. In order to carry out this research, we obtained 96 survey sheets and inspected twenty assumptions based on the reliability, validity of the questionnaires. The results of regression analysis are summarized as follows; First, the factors of certification motive influence on the requirement's implementation except resources management. Second, the two elements of ISO 9001 requirement, resources management and product realization, have an important effect on the operational performance and financial performance considerably in the companies that choose the internal motive. Finally, the two requisites of ISO 9001 requirement, resources management and measurement, analysis and improvement, affect to the operational performance and financial performance significantly in the businesses that select the external motive. Based on the results, the companies that choose the internal motive have a good performance to execute the ISO 9001 requirements. Also, to implement the requirements of ISO 9001 is helpful for the companies to produce the operational and financial performance.

• 시스템엔지니어링학술지
• /
• 제13권1호
• /
• pp.51-56
• /
• 2017

This paper presents a requirement development process using the model based systems engineering design process to the developments of the missile Seeker. SysML Model and requirement analysis templates were used as the specific execution method for applying the system engineering process. This paper will present a process for deriving the technical requirements and derived requirements using them.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.566-569
• /
• 2013

The purpose of this research is to develop the technology to meet the requirements of the design content, and to build a 'Requirement Information Management Model' for the design project. The model that should be used in the early design stage will undergo the following process: First, basic requirements would be defined by extracting the design content in the form of a reusable library of space units. At the next stage, requirement information should be modified after considering unique characteristics for the project and conflict problems between function and performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1457-1458
• /
• 2010

• ETRI Journal
• /
• 제26권6호
• /
• pp.615-621
• /
• 2004

Next generation mobile communication system, such as IMT-2000, adopts Turbo codes due to their powerful error correction capability. This paper presents a block-wise maximum a posteriori (MAP) Turbo decoding structure with a low memory requirement. During this research, it has been observed that the training size and block size determine the amount of required memory and bit-error rate (BER) performance of the block-wise MAP decoder, and that comparable BER performance can be obtained with much shorter blocks when the training size is sufficient. Based on this observation, a new decoding structure is proposed and presented in this paper. The proposed block-wise decoder employs a decoding scheme for reducing the memory requirement by setting the training size to be N times the block size. The memory requirement for storing the branch and state metrics can be reduced 30% to 45%, and synthesis results show that the overall memory area can be reduced by 5.27% to 7.29%, when compared to previous MAP decoders. The decoder throughput can be maintained in the proposed scheme without degrading the BER performance.

• 산업경영시스템학회지
• /
• 제25권4호
• /
• pp.40-45
• /
• 2002

An AS/RS construction cost minimization model under throughput rate requirement constraint has been developed, whose objective function includes S/R machine cost, storage rack cost, and interrace conveyor cost. S/R machine cost is a function of the storage rack height, the unit load weight, and the control logic used by the system, while storage rack cost is a function of the storage rack height, the weight and the volume of the unit load. Since the model is a nonlinear integer programming problem which is very hard to solve exactly with large problem size, a solution procedure is developed to determine the height and the length of the storage rack with a fixed number of S/R machines, while increasing the number of S/R machines one by one to meet the throughput rate requirement.

• 한국CDE학회논문집
• /
• 제7권1호
• /
• pp.42-56
• /
• 2002

Presented in this study is a top-down functional requirement analysis procedure and the desired functionalities for PDM system development, and the benefits of top-down approach over a conventional bottom-up approach is also shown. For the purpose of top-down requirement analysis for PDM system, this study proposes 4P modeling view. 4P modeling view is defined as a modeling perspective for classifying functional requirements and integrating product-related information objects that must be man-aged within PDM systems. Based on 4P modeling templates, benchmarking analysis of commercially major PDM products is conducted and as a result of this analysis, this study suggests desired functionalities for PDM system.

• 시스템엔지니어링학술지
• /
• 제8권1호
• /
• pp.1-7
• /
• 2012

This research aims to propose a model to estimate the appropriate SE Cost rate to the total project cost when systems engineering applied to light rail transit project. In this research an investment cost estimation model is proposed with reference to COSYSMO (Constructive System Engineering Cost Model). This model includes four input factors such as requirement numbers, interface numbers, algorithm numbers, and scenario numbers. When 2600 requirement numbers are considered on a proposal document with 350 pages in a light rail transit specification of 500 billion~trillion won scale, COSYSMO demo version estimates 42.5 billion won of SE cost (about 5% of total project cost or about 10% of E&M cost).