• Title/Summary/Keyword: RF interference

Search Result 240, Processing Time 0.021 seconds

Performance of RF Interference Reduction Module in Indoor and Outdoor Environments

  • Bumjun Ko;Heonjin Hong;Youngjun Chong;Sanggee Kang
    • International Journal of Internet, Broadcasting and Communication
    • /
    • v.15 no.4
    • /
    • pp.107-114
    • /
    • 2023
  • In this paper, the results of experiments conducted in indoor wired and outdoor wireless environments to reduce the interference impact of 5G mobile communication on fixed satellite services using RF Interference Reduction Module (IRM) are presented. Test results for interference signals with a 100MHz bandwidth in a wired environment demonstrate that RF IRM can reduce interference by more than 20dB in a 100MHz bandwidth. The performance of RF IRM was also tested in the S-band wireless environments. In the S-band wireless environments with interference signals having a 20MHz bandwidth, RF IRM exhibits interference reduction performance of 12-15dB, for signals with a 50MHz bandwidth, it shows 10-12dB interference reduction, and for signals with a 100MHz bandwidth, it demonstrates 5-10dB interference reduction. This paper shows that RF IRM can be used not only within transceivers but also in wireless environments to mitigate interference.

Wideband RF Interference Reduction Module

  • Kang, Sanggee;Hong, Heonjin;Chong, Youngjun
    • International journal of advanced smart convergence
    • /
    • v.11 no.3
    • /
    • pp.28-35
    • /
    • 2022
  • Interference always exists between wireless communication systems used in the same frequency band or adjacent frequency bands. In order to deploy a new wireless communication system such as a 5G system, a new frequency band must be allocated to the system. For this purpose, after analyzing interference between the existing system and the new system, a method of setting a frequency guard band or a minimum separation distance has been used as a passive method to limit the interference effect. This paper presents a wideband RF IRM(Interference Reduction Module) that can actively reduce the influence of interference between wireless communication systems. The wideband RF IRM can reduce the interference effects of 5G signals on satellite signals. The principle and structure of the wideband RF IRM are presented. The wideband RF IRM can suppress approximately 20dB of interference signal in 100MHz bandwidth when only interference signal exists. It also shows that when a 5G interference signal of -45dBm/100MHz and a satellite signal of -55dBm/40MHz exist simultaneously at a center frequency of 3.83GHz, about 15dB of 5G interference signal can be reduced in the frequency range covered by the satellite signal. The experimental results demonstrate that the wideband RF IRM can actively reduce the 5G interference signal on the satellite signal and can be used for the purpose of reducing the interference effect in a similar environment.

RF Interference Analysis and Verification in the Synthetic Aperture Radar Satellite System (영상레이더 위성시스템 구조물의 RF 간섭특성 분석 및 검증)

  • Jang, Jae-Woong;Kim, Tae-Yoon;Lim, Seong-Bin
    • Aerospace Engineering and Technology
    • /
    • v.8 no.1
    • /
    • pp.187-196
    • /
    • 2009
  • Synthetic Aperture Radar(SAR) satellite system for broad-area imaging has RF systems including SAR radiating a high power, data link system transmitting the acquired image data from the SAR, TC&R(Telemetry, Command, and Ranging) to communicate with a ground segment to control a satellite. Each system transmits RF signal having various frequencies and radiates a high power, RS(Radiated Susceptibility) specification should be verified at an electronic unit mounted in satellite. RF interference can be happened because of non-linearity of a RF system. Therefore, we manufactured a structure model installed antennas which have a similar pattern with a real antenna, the effect by RF interference is analyzed and verified.

  • PDF

SSD(Simultaneous Single Band Duplex) System Using RF Cancellation and Digital Cancellation (RF Cancellation과 Digital Cancellation을 사용한 SSD(Simultaneous Single Band Duplex) 시스템)

  • An, Changyoung;Ryu, Heung-Gyoon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39A no.2
    • /
    • pp.100-108
    • /
    • 2014
  • In this paper, we design SSD(simultaneous single band duplex) system using RF(radio frequency) cancellation and digital cancellation. we analyze characteristic of residual self-interference after RF Cancellation signal when error of phase shifter occur in RF cancellation. When phase shifter error of $0^{\circ}$, $0.5^{\circ}$, $1^{\circ}$ and $2^{\circ}$ occur in RF cancellation, residual self-interference signal power after RF cancellation is bigger than desired signal power of distant station. So, it is impossible to receive transmit data of distant station. but we confirm that it is possible to receive transmit data of distant station by digital cancellation with frame structure. Also, in digital cancellation with frame structure, if residual self-interference signal after RF cancellation is too large then LMS algorithm requires more time to estimate self-interference channel. That is, performance degradation occurs because self-interference channel estimation has not completed in estimation frame.

Potential Interference of Electric Equipments on Radio Service below 30MHz (30MHz 이하 무선 서비스에 대한 전자기기의 잠재적 간섭 영향)

  • Yun, Hye-Ju;Lee, Il-Kyoo
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.13 no.2
    • /
    • pp.269-273
    • /
    • 2013
  • This paper analyzed a potential interference of electric equipments on radio service below 30MHz through an experiment with a PDP(Plasma Display Panel) TV and a RF(Radio Frequency) light bulb in an anechoic chamber. The radiation levels of the PDP TV and the RF light bulb are measured and a combined interference is calculated on the basis of the experimental value. As a result, the combined interference signal level is increased according to the number of interferer. The possibility of a potential interference from electric equipments on radio service below 30MHz is realized through comparison between the measured radiation value of electric equipments and the CISPR(International Special Committee on Radio Interference) 11 limit.

Filter design for protecting signal interference between RF equipments on aircraft (항공기 RF 장비들의 신호 간섭 방지를 위한 필터 설계)

  • Kim, Junhyoung;Kim, Bong-Gyu;Jeon, Young-Gu;Lee, Seong-Woo
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.41 no.3
    • /
    • pp.246-252
    • /
    • 2013
  • This paper presents method to suppress signal interference by using the filter in the RF output stage of the radiation equipment as a way to avoid interference between the RF(Radio Frequency) equipment mounted on aircraft. Especially filter design to suppress harmonics of the radiation equipment and testing method to verify the filter's performance is presented. Filter was installed at RF output stage of U/VHF radio in order to prevent interference between U/VHF(Ultra/Very High Frequency) radio and data link system. Filter design and testing method in this paper will be able to give help in the design of aircraft equipments as a tool that can be used to establish measures for problem of interference in the aircraft.

Interference Cancellation Based on Adaptive Signal Processing for MIMO RF Repeaters (MIMO RF 중계기를 위한 적응 신호처리 기반의 간섭 제거)

  • Lee, Kyu-Bum;Choi, Ji-Hoon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.9C
    • /
    • pp.735-742
    • /
    • 2010
  • In this paper, we propose adaptive algorithms for interference cancellation in RF repeaters with multiple transmit and receive antennas. When multiple antennas are used in a repeater, the imperfect isolation between transmit and receive antennas causes the feedback interference which is modeled as multi-input multi-output (MIMO) channel. To remove the feedback interference, we derive the least mean square (LMS) algorithm and the recursive least squares (RLS) algorithm for interference cancellation based on adaptive signal processing techniques. Through computer simulations for the proposed algorithms, we analyze the convergence characteristics and compare the steady-state performance for interference cancellation.

A Channel Estimation Method for Multipath Feedback Interference Signal Cancellation of RF Repeaters (RF 중계기의 다중 궤환 간섭 신호 제거를 위한 채널 추정 방식)

  • Lee, Sang-Dae;Park, Jin;Sung, Won-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.2A
    • /
    • pp.98-106
    • /
    • 2008
  • To reduce the outage probability and to increase the transmission capacity, the importance of repeaters in cellular systems keeps increasing. Unlike optical repeaters which require wireline connections, RF repeaters are easy to install, have low limitations in location and also have a reduced operational expense such as the optical fiber maintenance cost. On the other hand, RF repeaters suffer the interference due to the feedback signals between the transmitter and receiver antennas, hence require an extra interference cancellation method when the amount of the feedback signal reduction by using the shielding is not sufficient. In this paper, a channel estimation method for two-path feedback interference signals in the ICS (Interference Cancellation System) repeaters using baseband signal processing is proposed and its performance is evaluated. When compared with the conventional method which estimates each multipath individually, the proposed method achieves 10 dB performance gain in terms of the normalized mean-squared-error.

A Study on Digital RF System with Interference Cancellation System (간섭제거기를 적용한 디지털 RF 시스템에 관한 연구)

  • Joo, Ji-Han;Lee, Sang-Joo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.12
    • /
    • pp.1252-1263
    • /
    • 2009
  • In this paper, in order to improve a service quality and to broaden the service coverage in the mobile communication system a study on a digital RF repeater employed with an Interference Cancellation System(ICS) is performed. The digital RF repeater employed with an ICS is implemented to remove interference and feedback signals which are disadvantages of a conventional(or general) RF repeater. This thesis presents the design and experiments of the new wireless repeater. The proposed wireless repeater consists of a RF repeater mounted with digital engine. The digital ICS engine consists of a DSP and FPGA. The digital engine and RF circuit are designed into a one-piece. After developing hardware through the digital platform they are also designed and fabricated into a one-piece in order to apply a best performance repeater system. The method of removing interference and feedback signals is an adaptive IF technique employed with a LMS algorithm. The powerful performance and fast convergence speed is obtained by using this method.

Interference and noise analysis for hybrid FSO/RF-based 6G mobile backhaul

  • Soyinka Nath;Shree Prakash Singh;Sujata Sengar
    • ETRI Journal
    • /
    • v.44 no.6
    • /
    • pp.966-976
    • /
    • 2022
  • Optical wireless communication, or free space optics, is a promising solution for backhauls in sixth-generation mobile systems. However, the susceptibility of optical links to weather conditions has led to FSO links being furnished with radio frequency (RF) backups. These Hybrid FSO/RF systems provide enhanced link availability but lead to RF resource wastage. Cognitive radio technology, in contrast, is well known for its optimal use of RF resources and may be combined with an FSO link to create a Cognitive Hybrid FSO/RF system. This work uses such a system to analyze a configuration for a mobile backhaul in sixth-generation mobile systems. This configuration can seamlessly coexist with established large scale RF cellular networks. The performance of this configuration is analyzed with respect to outage probability and average bit error by considering the impact of optical channel turbulence, misalignment loss, RF interference, and noise. Mathematical closed-form expressions are verified by simulations.