• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.72-80
• /
• 2013

For the proper cooling of in-wheel motor, the cooling channel should have the characteristics which are low pressure drop and adequate cooling oil supply to motor part. In this study, the flow performance of cooling channel for in-wheel motor was evaluated and the shape of the channel was optimized. First, the pressure drop and flow distribution characteristics of the initial channel model were evaluated using numerical analysis. Also, by the result of analysis and design modification, 4 design parameters of the channel were selected. Second, using the Taguchi optimal method, the cooling channel was optimized. In the method, nine models with different levels of the design parameters were generated and the flow characteristics of each models was estimated. Base on the result, the main effect of the design parameters was founded and optimized model was obtained. For the optimized model, the pressure drop and oil flow rate were about 0.196 bar and 0.207 L/min, respectively. The pressure drop decreased by about 0.3 bar and the oil flow rate to the motor part increased by about 0.2 L/min compared to the initial model.

• 한국공간구조학회논문집
• /
• 제8권6호
• /
• pp.75-83
• /
• 2008

철근 콘크리트 구조물에서 발생하는 균열에 의한 손상은 과도한 하중이나 사용성에 의해 발생한다. 이러한 손상을 검사하는 방법으로 육안으로 확인하거나 비파괴 시험법을 주로 이용하고 있다. 후자의 경우, 콘크리트 내부 철근의 배근 방향성에 의해 균열에 의한 손상인지 판별하기 어려운 문제가 발생하게 되며, 비파괴시험(Non-destructive Test)에 사용되는 대부분의 센서(Sensor)는 1축 가속도 센서이기 때문에 중첩된 전달파를 분석하기에는 어렵다. 따라서, 이를 해결하기 위해 중공 유리관을 이용하였고 콘크리트 보 내부에 매입하여 철근이 매입되어 있는 경우에 대하여 3축 가속도계를 이용하여 탄성파로 가진 하였을 경우에 발생하는 파(Wave)를 비교 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.475-478
• /
• 1995

The variations of cold gas properties such as density, pressure, temperature and velocity which are dependent each other are closely related with the dielectric recovery of an interrupter. So, the pressure-rises at no-load in the puffer cylinder and in front of fixed arcing contact of 800kV model interrupter were measured experimentally using pressure transducers of strain gage type and semiconducting type, respectively. The maximum value of pressure-rise in the puffer cylinder increased almost linearly from 7.6 bar at the minimum operated pressure to 9.7 bar at the maximum operated pressure, while the pressure-rise in front of fixed arcing contact was independent with the operated pressure. The measured values will be utilized in verifying the self-developed cold flow analysis program and as an input of commercialized CFD program package.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.20-21
• /
• 2017

There have been reports in the media about some refineries that omit the refining process and deliver raw material for reasons of cost reduction, shortening of production time, etc. Also, in most RMC factories acceptance inspection is not conducted on account of issues with the proficiency of the equipment and cost issues; instead only scores are relied upon. Therefore this study sought to analyze the relation between the value of the density of FA actually delivered to RMC companies, attained with the Hydrometer method, and its fineness, to see whether the quality of FA can be evaluated statistically. Results led to the conclusion that there is a problem in terms of credibility in the fineness of FA shown on the test report. Upon analyzing the difference between the fineness of FA as measured using Blaine's air permeability method and its density of the Hydrometer method, the correlation was found to be satisfactory; therefore the possibility of a FA fineness quality evaluation could be proved as well.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.102-105
• /
• 2007

본 연구에서는 과산화수소 분해 반응을 이용한 초소형 추력기에 대한 성능 평가 실험을 수행하였다. 촉매 베드로는 질량 대 면적 비가 큰 다공성의 세라믹 물질($Isolite^{(R)}$)을 사용하였다. 14%wt의 백금이 촉매로서 촉매 베드에 코팅되었고, 단일추진제로는 85% 과산화수소를 사용하였다. 촉매 베드의 길이와 과산화수소의 가압 압력을 변수로 정하였다. 모든 실험은 콜드 스타트 조건에서 30초간 수행되었다. 매 실험마다 압력을 측정하여 $c^*$ 효율을 계산하였다. 촉매 베드의 길이가 30 mm이고 가압압력이 5.51 bar일 때 95% 이상의 만족스러운 $c^*$ 효율을 보였다.

• 한국가스학회지
• /
• 제11권3호
• /
• pp.49-55
• /
• 2007

폴리에틸렌(PE) 배관은 시공이 편리하고 강관에 비해 가격이 저렴하기 때문에 저압 공급용으로 많이 사용하고 있다. 본 연구에서는 유한요소 해석을 이용하여 매설한 PE 배관이 다양한 외부하중을 받는 경우에 발생하는 응력 및 변형에 대하여 알아보았다. 배관 직경이 $50{\sim}400mm$인 PE 배관에 대하여 매설 깊이를 $0.6{\sim}1.2m$로 달리하고 그리고 공급압력을 $0.4{\sim}4bar$로 변화시켰을 때 배관에 발생하는 응력을 유한요소를 이용하여 계산하였다. 결과적으로 매설 상태에서 각 하중 조건에 따른 응력 상태 그리고 복합적인 하중이 작용할 경우에 400호 배관에 발생하는 응력을 계산한 결과 매설 깊이가 1 m일 때 최대 원주방향 응력이 가장 작은 값을 나타내었다.

• 한국생산제조학회지
• /
• 제22권5호
• /
• pp.767-773
• /
• 2013

A high-pressure, high-pressure drop control valve, which transforms the power transfer of a system by reducing the inlet pressure of 345bartothe outlet pressure of 112bar, is a fundamental component in an offshore plant process. With the increasingly growing market share of the maritime industry, this valve has been expected to be a high-value-added product. This study not only analyzes the relation between pressure drop and fluid velocity in a trim by using fluid analysis, but also examines the possibility of cavitation in a valve in addition to the plot for the extension of lifespan. Based on the analysis results, the design and production method of the valve are established, and accordingly, performance evaluation is carried out. It is demonstrated that the pressure drop from 345bar to 112bar is more feasible in the presence of the trim, which can induce a continuous and diminutive pressure drop in order to prevent cavitation in a high-pressure drop control valve. Furthermore, despite the fluid velocity near a seatring being found to be over 30m/s, the lifespan of the valve is determined to be adequate considering the operation condition of a prototype valve of 80%.

• 한국공간구조학회논문집
• /
• 제14권4호
• /
• pp.73-80
• /
• 2014

For the last decade many bridges and buildings have experienced flexural strengthening with the fiber reinforced polymer(FRP) bonding system, demands for increasing heavy traffic loads and the changing of the code application. Of the many strengthening systems, NSM(near surface mounted) system with FRP has become attractive and popular way of strengthening for the existed RC structures and many studies and applications of this technique have significantly increased all over the world. Meanwhile, polymer mortar that contains much of the same ingredients as cement but includes the addition of certain polymer resins for enhancing desired physical properties, has been used as an alternative adhesive. This paper focuses on flexural behaviour of CFRP-bar NSM system with variables such as kinds of adhesive, anchorage, sectional aspect ratio. Based on the test results and test-to-predicted ratio, this paper provides researchers and practical engineers a fundamental knowledge and intuition.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.50-58
• /
• 2017

This paper proposes a real-time robotic vision control scheme using the weighting matrix to efficiently process the vision data obtained during robotic movement to a target. This scheme is based on the vision system model that can actively control the camera parameter and robotic position change over previous studies. The vision control algorithm involves parameter estimation, joint angle estimation, and weighting matrix models. To demonstrate the effectiveness of the proposed control scheme, this study is divided into two parts: not applying the weighting matrix and applying the weighting matrix to the vision data obtained while the camera is moving towards the target. Finally, the position accuracy of the two cases is compared by performing the slender bar placement task experimentally.

• 한국수학사학회지
• /
• 제30권4호
• /
• pp.233-246
• /
• 2017

$Ces{\grave{a}}ro$ summability is a generalized convergence criterion for infinite series. We have investigated the classical results of summability for Fourier series from 1897 to 1957. In this paper, we are concerned with the summability and summation methods for Fourier Series from 1960 to 2010. Many authors have studied the subject during this period. Especially, G.M. Petersen,$K{\hat{o}}si$ Kanno, S.R. Sinha, Fu Cheng Hsiang, Prem Chandra, G. D. Dikshit, B. E. Rhoades and others had studied neoclassical results on the summability of Fourier series from 1960 to 1989. We investigate the results on the summability for Fourier series from 1990 to 2010 in section 3. In conclusion, we present the research minor lineage on summability for Fourier series from 1960 to 2010. $H{\ddot{u}}seyin$ Bor is the earliest researcher on ${\mid}{\bar{N}},p_n{\mid}_k$-summability. Thus we consider his research results and achievements on ${\mid}{\bar{N}},p_n{\mid}_k$-summability and ${\mid}{\bar{N}},p_n,{\gamma}{\mid}_k$-summability.