• Transactions on Control, Automation and Systems Engineering
• /
• 제4권3호
• /
• pp.205-211
• /
• 2002

Unknown inputs observer(UIO) which is achieved by the coordinate transformation method has the differential of system outputs in the observer and the equation for unknown inputs estimation. Generally, the differential of system outputs in the observer can be eliminated by defining a new variable. But it brings about the partition of the observer into two subsystems and need of an additional differential of system outputs still remained to estimate the unknown inputs. Therefore, the block pulse function expansions and its differential operation which is a newly derived in this paper are presented to alleviate such problems from an algebraic form.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.625-628
• /
• 1989

광섬유와 micro변형기를 이용하여 다점 압력 계측 system을 구성하여 실험을 행하였다. 그 결과 pulse generator와 analog switch를 이용함으로써 100ns의 광 pulse를 쉽게 얻을 수 있었으며, 또한 3개의 광 pulse를 analog switch를 이용하여 쉽게 분리할 수 있었다. 한편 변형기에 가한 힘과 광 손실간의 상관관계를 이론치와 비교하여 조사한 결과 힘과 광손실간의 상관관계는 이론치와 실험치가 유사한 경향을 나타내는 것을 알 수 있었다.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.217-223
• /
• 2012

본 논문은 트리거 시간을 조절하여 펄스 성형이 가능한 150 MW 펄스 파워 시스템의 설계와 동작특성을 알아보았다. 이 시스템은 2개의 커패시터 뱅크 모듈로 구성되어 있고, 각 커패시터 뱅크 모듈은 병렬로 연결되어 있다. 그리고 커패시터 뱅크 모듈은 메인스위치, 커패시터, 에너지 덤프회로, 크로바 회로, 펄스 성형 인덕터로 구성되어 있다. 또한 이 시스템의 모듈 선택과 트리거 시간은 트리거 제어부에서 조정된다. Pspice 시뮬레이션은 실험회로의 결과를 예측하고, 시스템의 구성품의 파라미터를 결정하기 위한 것으로 사용하였다. 실험 결과, 시뮬레이션은 실험결과와 잘 일치하였다. 출력 전류의 펄스폭은 커패시터 뱅크 모듈에서의 순간적 점화 시간 제어로 300~650 us의 펄스폭이 형성되었다. 그리고 최대 전류값은 2개의 커패시터 뱅크 모듈이 동시에 트리거 되었을 때 약 40 kA 정도이다. 이 150 MW 펄스 파워 시스템은 파암 전원, Rail Gun, Coil Gun, 나노분말 제조, HPM 등과 같은 대전류 펄스 파워 시스템에 적용할 수 있다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.384-388
• /
• 2003

In this paper, we have proposed a OFDM/QPSK-DMR(Orthogonal frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band-limited pulse shaping filter) over the Microwave channel. In the proposed DMR system, STS-1(51.84 Mbps) of SONET(Synchronous Optical NETwork) is first modulated by OFDM/QPSK symbol and used Band-limited pulse shaping filter. The advantage of the proposed DMR system is to simplify system complexity and increase IFFT/FFT block use-efficiency. The system performance of single carrier and OFDM systems is already proved that those of DMR systems have the same performance over AWGN(Additive White Gaussian Noise) channel environment. Therefore, the system is analyzed between proposed OFDM/QPSK-DMR and single carrier DMR systems and simulated by BER performance and Signature curve over Microwave channel environment. Simulation result is that the proposed system performances are approaching to the performance of single carrier DMR system as the number of Sub-carriers increasing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1297-1300
• /
• 2008

A conventional linear accelerator system requires a flat-topped pulse with less than ${\pm}$ 0.5% ripple to meet the beam energy spread requirements and to improve pulse efficiency of RF systems. A pulse transformer is one of main determinants on the output pulse voltage shape. The pulse transformer was investigated and analyzed with the pulse response characteristics using a simplified equivalent circuit model. The damping factor ${\sigma}$ must be >0.86 to limit the overshoot to less than 0.5% during the flat-top phase. The low leakage inductance and distributed capacitance are often limiting factors to obtain a fast rise time. These parameters are largely controlled by the physical geometry and winding configuration of the transformer. A rise time can be improved by reducing the number of turns, but it produces larger pulse droop and requires a larger core size. By tradeoffs among these parameters, the high-voltage pulse transformer with a pulse width of 10 ${\mu}s$, a rise time of 0.84 ${\mu}s$, and a pulse droop of 2.9% has been designed and fabricated to drive a klystron which has an output voltage of 284 kV, 30-MW peak and 60-kW average RF output power. This paper describes design optimization of a high-voltage pulse transformer for high-power pulsed applications. The experimental results were analyzed and compared with the design. The design and optimal tuning parameter of the system was identified using the model simulation.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.1029-1035
• /
• 2020

The detector suffers from pulse pileup by overlapping of the signals when it was used in high radiation fields. The pulse pileup deteriorates the energy spectrum and causes count losses due to random co-incidences, which might not resolve within the resolving time of the detection system. In this study, it is aimed to propose a new pulse pileup correction method. The proposed method is to correct the start point of the pileup pulse. The parameters are obtained from the fitted exponential curve using the peak point of the previous pulse and the start point of the pileup pulse. The amplitude at the corrected start point of the pileup pulse can be estimated by the peak time of the pileup pulse. The system is composed of a NaI (Tl) scintillation crystal, a photomultiplier tube, and an oscilloscope. A 61 μCi ¹³⁷Cs check-source was placed at a distance of 3 cm, 5 cm, and 10 cm, respectively. The gamma energy spectra for the radioisotope of ¹³⁷Cs were obtained to verify the proposed method. As a result, the correction of the pulse pileup through the proposed method shows a remarkable improvement of FWHM at 662 keV by 29, 39, and 7%, respectively.

• 조명전기설비학회논문지
• /
• 제14권2호
• /
• pp.89-96
• /
• 2000

본 논문은 최근의 반도체 스위칭 소자(Power-MCSEFET)를 사용하여 상용화의 관점에서 회로구성이 간단하고 취급이 용이한 Frward형 펼스 전원장치에 관하여 기술하고 있다. Forward형 고주파 펄스 전원장치에 인가되는 펄스전압의 최대값은 브리지 청류회로띄 위상각 제어에 의해서 이루어지고 있으며, 펄스전압은 Power-MOSFET의 듀티비에 의해 펼스주기가 정해진다. 또한, 본 논운에셔는 Forward형 펄스 전원장치의 회로동작과 전원장치의 특성 및 전원장치의 방전특성을 스위칭 주파수와 위상각의 변화에 따라서 검토하였다. 첨가해, 펄스 전원장치를 제작하여 램프형 오전발생기를 부하로 하였을 때 이론해석과 특성해석의 정당성을 입증하였다. 본 장치는 향후 다양한 분야로의 펄스 전원 시스템에 응용.가능성을 보여주고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1079-1081
• /
• 2007

An L-band Linear Accelerator System for E-beam sterilization is under construction for bio-technology application. The klystron-modulator system as an RF microwave source has an important role as major components to offer the system reliability for long time steady-state operations. A PFN line type pulse generator with a peak power of 71.5-MW, $7\;{\mu}s$, 285 pps is required to drive a high-power klystron. The high power pulse transformer has a function of transferring pulse energy from a pulsed power source to a high power load. The pulse transformer producing a pulse with a peak voltage of 275 kV is required to produce 30-MW peak and 60 kW average RF output power at the frequency of 1.3-GHz. We have designed the high power pulse transformer with 1:13 step-up ratio. The peak and average power capability is 71.5-MW (275 kV, 260 A at load side with $7\;{\mu}s$ pulse width) and 130 kW, respectively. In this paper, we present measurements and its analysis on the design parameters, and an initial test result as well as a design concept on the high-power pulse transformer.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.139-147
• /
• 2003

본 논문에서는 FCC에서 제정한 허용 주파수 대역 내에서 100 Mbps급 M-ary PPM/TH UWB 시스템 설계를 위한 특성 파라미터의 규격을 제안하고, AWGN 채널에서 제안된 시스템의 성능을 분석하였다. 성능 분석 결과, 이 시스템에 적용 가능한 펄스 주기는 매우 한정적이며, 시스템의 데이터 전송률을 일정하게 할 경우, M과 펄스반복 개수가 증가할수록 시스템 성능은 개선되고, 사용자 수는 감소됨을 관측하였다.

• 센서학회지
• /
• 제20권5호
• /
• pp.322-328
• /
• 2011

There are many ways to detect the heart rate non-invasively such as ECG, PPG, strain gauge, and pressure sensor. In this paper, the pulse wave measurement system using bipolar biased head on mode of the Hall sensor is proposed for measuring the radial artery pulse. TMS320F2812 was used to implement the proposed system and a portable wireless network(zig-bee) was used to show the experimental result. It was confirmed from experiment that the performance of the implemented system was more stable and faster than PPG sensor or piezoelectric film pressure sensor.