• 한국해양공학회지
• /
• 제16권2호
• /
• pp.44-52
• /
• 2002

The mechanism of pullout resistance of compression anchor is analysed. This anchor is developed through the field pullout tests and the laboratory element test. The compression anchor is characterized by decrease of progressive failure, simple site work, economy and durability compared with tension anchor. The characteristics of compression anchor, compared with tension anchor. mainly are summarized as follows ; (1) The plastic displacement of anchor body is very small during pullout of anchor. (2) Total anchor length decreases by the shortening of free length; (3) The progressive failure is decreased.; (4) The safety factor for pullout resistance increases with time after construction of anchor.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.419-426
• /
• 2002

In this study, the steel strip reinforcement bolted with braced angles is displayed skin friction resistance as well as passive resistance through existing the steel strip reinforcement. To understand pullout behavior characteristics, friction effects between soil and reinforcement are evaluated with the width of reinforcement, magnitude of surcharge, and existence of passive resistance member through laboratory pullout test. To analyze interference effects for passive resistance member, various tests are carried on case that the number, the location, and the spacing of braced angles are different. Using this test result, pullout resistance factor is calculated to consider location of braced angles and degree of interference for spacing ratio.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1079-1083
• /
• 2009

In this study, the pullout resistance characteristic of a wedge-shaped soil nail, made by attaching small steel sticks to the tip of a nail in a wedge shape, was investigated. It was developed to improve the overall pullout resistance capacity of the existing soil nail system, composed of nail and grout, by making the wedge provide additional pullout resistance. In order to evaluate the pullout resistance of the wedge shape-soil nail, field pullout tests were conducted, and the results were compared with those for the existing soil nail without the wedge. The field test results showed that the pullout resistance capacity of the wedge-shaped soil nail was 50% larger than that of the existing soil nail without the wedge.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.1-10
• /
• 1999

In the present study, laboratory pull-out tests with various geogrid shapes are carried out to investigate behavior characteristics of the geogrid. Also, an interface pullout formula is proposed for predicting and interpreting pullout test result. The analytical model is based on the assumption that the reinforcement is linear elastic during the pullout test. And then, maximum pullout force, frictional resistance and active length for each of the grid density ratio are predicted based on the interface pullout formula. The predicted results were compared with those of pullout tests, and showed in general good agreements.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.87-97
• /
• 2014

In this study, the model tests were conducted on the short piles installed in sands under a horizontal pullout load to investigate their behavior characteristics. From the horizontal loading tests where dimensions of the pile diameter and length, and loading point were varied, the horizontal pullout resistance and the rotational and translational movement pattern of the pile were investigated. As a result, the horizontal pullout resistance of the pile embedded in sands was dependent on the pile length, diameter, loading point, etc. The ultimate horizontal pullout load tended to increase as the loading point (h/L) moved to the bottom from the top of the pile, regardless of the ratio between the pile length and diameter (L/D), reached the maximum value at the point of h/L = 0.75, and decreased afterwards. When the horizontal pullout load acted on the upper part above the middle of the pile, the pile rotated clockwise and moved to the pullout direction, and the pivot point of the pile was located at 150-360mm depth below the ground surface. On the other hand, when the horizontal pullout load acted on the lower part of the pile, the pile rotated counterclockwise and travelled horizontally, and the rotational angle was very small.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1060-1064
• /
• 2010

Ground anchors are mostly used to improve the resistance capacity of retaining walls. The end of the anchor is connected to retaining wall through tendons and the forces in tendons are transferred to ground. In this study, we plan that the new anchor system increases the tension force in tendons and improves the pullout resistance characteristics of the system. In order to increase the pullout resistance capacity of existing anchor system, the new anchor system is made by attaching four steel sticks to the tip of anchor end. So the field test results showed that the pullout resistance capacity of the wedge-shaped ground anchor was acceptable to elastic displacement range.

• 한국해양공학회지
• /
• 제17권4호
• /
• pp.43-51
• /
• 2003

The resistance mechanism of anchor changes according to the types of anchor. Friction anchors are classified into tension and compression types. In this study, the characteristics and mechanism of pullout are analysed, and the design method of anchor and computer program for design are developed through compression test results of anchor body grout. The characteristics of compression anchor, compared with tension anchor, are summarized mainly as follows: (1) The effect of progressive failure of compression anchor body are much smaller than those of tension anchor during pullout of anchor: (2) The skin friction resistance is increased by Possion effect of grout (anchor body) during pullout of compression anchor.

• 토지주택연구
• /
• 제7권4호
• /
• pp.281-289
• /
• 2016

압축 부재인 PHC 말뚝(직경 600mm)도 강선의 부착력을 높이면 83.6~91.6tonf의 극한 인장력에 대해 구조적으로 저항할 수 있는 것으로 실험결과 나타났다. 이러한 시험결과에 안전율을 고려하여 적절한 허용값을 제시하면 부상방지 앵커를 대체하거나 절감시킬 수 있는 것으로 기대되었다. 이를 위해서는 구조적 인장성능과 함께 실제 지반에 시공된 매입말뚝의 인발저항 거동이 규명되어야 한다. 본 연구에서는 현장에 시공된 실제 매입말뚝의 인발거동 특성을 파악하기 위하여 정적 인발재하시험을 실시하여 주면마찰력 산정식과 비교하였다. 또한, 간편하게 인발저항력을 평가하기 위하여 PDA를 이용한 동재하시험을 실시하여 정적 인발재하시험 결과와 비교하였다. 그 결과, 매입말뚝의 시멘트풀이 충분히 경화한 후인 15일 후에는 LH 주면마찰력 산정식의 마찰력과 정적인발재하시험결과가 잘 일치하였고 동재하시험에서 구한 마찰력과도 비교적 잘 일치하는 것으로 나타났다.

• 한국지반환경공학회 논문집
• /
• 제4권1호
• /
• pp.67-75
• /
• 2003

본 연구에서는, 기존 강재스트립 보강재의 표면마찰저항력 이외에도 지지저항력의 발휘가 동시에 예상되는 새로운 형태의 버팀재 볼트 접합형 강재스트립 보강재가 제시되었으며, 이에 대한 인발거동특성을 파악하기 위해 실내인발시험을 통하여 보강재의 폭, 상재하중의 크기 및 지지저항부재 유무 등이 흙과 보강재 사이의 마찰특성에 미치는 영향을 평가하였다. 또한 수동저항부재간의 상호간섭효과 등을 분석하기 위해, 지지저항부재의 설치개수와 위치 및 간격 등을 달리한 여러 조건 하에서 시험을 실시하였고, 이와 같은 시험결과를 바탕으로 하여 버팀재의 위치와 간격비에 따른 상호간섭의 영향 등이 고려된 인발저항계수 산정식을 제시하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.819-824
• /
• 2005

Anchor system is widely used in construction works to support retaining structures. The compression anchor is characterized by excellent mechanism of pullout resistance, as well as less probability of progressive failure than a tension anchor. This paper presents the mechanical characteristics of a newly developed compression anchor(JR-2000). Field tests were performed to investigate characteristics of the pullout resistance of compression anchor.