• Natural Product Sciences
• /
• 제26권1호
• /
• pp.90-96
• /
• 2020

Artemisia capillaris Thunb. (Compositae) is a traditional medicinal plant with various pharmacological activities. To elucidate new anti-allergic and anti-inflammatory constituents, the aerial parts of A. capillaries were investigated to afford a new compound, (6E,8E)-6-methylundeca-6,8-diene-2,5,10-trione (17) together with 19 known compounds (1 - 16, 18 - 20). The structures of these compounds were determined by extensive spectroscopic analyses including 1D, 2D NMR, HREIMS, and optical rotation [α]_D. The absolute configuration of compound 2 was determined to be S form for the first time. All isolates (1 - 20) were tested their inhibitory effects on interleukin 2 (IL-2) expression in T cells and NO production in lipopolysaccharide (LPS)-stimulated RAW246.7. Among them, compounds 10, 11, 19, and 20 reduced IL-2 expression in a dose-dependent manner. In addition, compound 10 also inhibited NO production with an IC₅₀ value of 37.3 ± 0.4 μM.

• 소음진동
• /
• 제5권1호
• /
• pp.95-106
• /
• 1995

Flow-induced vibration in heat exchanger (or fuel rod) in nuclar power plant can cause dynamic interactions between tubes and tube supports resulting in fretting-wear. To increase the reliability and design life of heat exchanger components, design criteria that establish acceptable limits of vibration and minimize fretting wear are necessary. The fretting-wear rate is dependent upon material combination, contact configuration, environmental conditions and tube-to tube support dynamic interaction. It is demostrated that the fretting -wear rate correlates well with tube-to-support contact force or work rate. The tube-to-support dynamic interaction, which consists of dynamic contact forces and tube motion, is used to relate single-span wear data to real heat exchanger configurations consisting of multi-span tube bundles. This paper describes the test facility to measure tube-to-support dynamic impact force and reports its dynamic characteristics through the four impact tests - a force transduces independent and external impact tests, central ring inside impact test and additional cylinder impact test. Through the tests the impact parameter change dependent upon the material difference of impacting ball is studied, and the impact parameters of Force Transducer Assembly components are measured. And also the dynamic behavior of Force Transducer Assembly is analyzed. The force measurement technique herein is shown to provide a reasonable measure of dynamic contact forces.

• Smart Structures and Systems
• /
• 제9권5호
• /
• pp.461-472
• /
• 2012

This study proposes an optics-based active sensing system for continuous monitoring of underground pipelines in nuclear power plants (NPPs). The proposed system generates and measures guided waves using a single laser source and optical cables. First, a tunable laser is used as a common power source for guided wave generation and sensing. This source laser beam is transmitted through an optical fiber, and the fiber is split into two. One of them is used to actuate macro fiber composite (MFC) transducers for guided wave generation, and the other optical fiber is used with fiber Bragg grating (FBG) sensors to measure guided wave responses. The MFC transducers placed along a circumferential direction of a pipe at one end generate longitudinal and flexural modes, and the corresponding responses are measured using FBG sensors instrumented in the same configuration at the other end. The generated guided waves interact with a defect, and this interaction causes changes in response signals. Then, a damage-sensitive feature is extracted from the response signals using the axi-symmetry nature of the measured pitch-catch signals. The feasibility of the proposed system has been examined through a laboratory experiment.

• 한국음향학회지
• /
• 제19권5호
• /
• pp.53-59
• /
• 2000

본 논문에서는 우리나라의 지형과 환경을 고려하여 전파환경을 분류하고, 1.95GHz에서 전파-전파특성을 연구하기 위해 PN 코드 상관 검파법을 이용한 다중지연파 측정 시스템을 구축하였다. 정확하고 기본적인 전파-전파 특성 측정을 위하여 우리나라의 특징적인 구조물인 시화공단을 선정하였다. 측정환경은 LOS와 N-LOS로 구분하여 전송거리에 따른 수신전력과 RMS 지연확산의 변화를 측정하였다. 측정결과 LOS의 수신전력은 -1.6dBm에서 -28.BdBm, RMS 지연확산은 0.023 ㎲∼0.22㎲이며 N-LOS의 수신전력은 -164Bm에서 -36.SdBm, RMS 지연확산은 0.068㎲∼0.37㎲가 측정되었다.

• Journal of Electrochemical Science and Technology
• /
• 제2권3호
• /
• pp.168-173
• /
• 2011

The availability, low toxicity, and high degree of technological development make silicon the most likely material to be used in solar cells, the cost of solar cells depends entirely on cost of high purity silicon production. The present work was conducted to electrodeposite of silicon from $K_2SiF_6$, an inexpensive raw material prepared from fluorosilicic acid ($H_2SiF_6$) produced in Iraqi Fertilizer plants, and using inexpensive graphite material as cathode electrode. The preparation of potassium fluorosilicate was performed at ($60^{\circ}C$) in a three necks flask provided with a stirrer, while the electro deposition was performed at $750^{\circ}C$ in a three-electrodes configuration with melt containing in graphite pot. High purity potassium fluorosilicate (99.25%) was obtained at temperature ($60^{\circ}C$), molar ratio-KCl/$H_2SiF_6$(1.4) and agitation (600 rpm). Spongy compact deposits were obtained for silicon with purity not less than (99.97%) at cathode potential (-0.8 V vs. Pt), $K_2SiF_6$ concentration (14% mole percent) with grain size (130 ${\mu}m$) and level of impurities (Cu, Fe and Ni) less than (0.02%).

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권9호
• /
• pp.495-503
• /
• 2000

In this paper we propose a design procedure of loop-shaping two-degree-of-freedom H$\infty$ digital controller for sampled-data system. We extend the continuous time loop-shaping two-degree-of-freedom H$\infty$ control problem to sampled-data system. The configuration of generalized plant is modified for sampled-data system. And then using continuous lifting we obtain the digital controller. In the final stage of loop-shaping procedure the problem of absorbing weighting functions is discussed. We summarize this study to the design procedure and illustrate the application for an inverted pendulum on the cart.

• 한국연소학회지
• /
• 제16권2호
• /
• pp.1-8
• /
• 2011

As one of the main technologies for carbon capture and storage in power generation, oxy-coal combustion is being developed for field demonstration in Korea. This study presents the results of numerical simulation for combustion in a single-wall-fired 100 $MW_e$-scale boiler proposed for the initial design of the demonstration plant. Using a commercial CFD code, the detailed combustion, flow and heat transfer characteristics were assessed both for air-mode and oxy-mode combustion. The results show that stable combustion can be achieved in the dual mode operation with the current boiler configuration. However, the differences in the flow pattern and heat transfer between the two combustion modes need to be considered in the design and operation which is mainly due to the larger density and specific heat of $CO_2$ compared to $N_2$. Further development of the boiler design is required using improved numerical modeling for radiative heat transfer and combustion.

• 한국수소및신에너지학회논문집
• /
• 제32권5호
• /
• pp.347-355
• /
• 2021

This paper is a study on the thermal design of printed circuit heat exchanger (PCHE) to supply cryogenic high pressure liquid hydrogen stored from hydrogen liquefaction process by using computational fluid dynamics (CFD). This PCHE should be thermally designed to raise the temperature of cryogenic liquid hydrogen to a desired temperature and also to be anti-icing to avoid any local freezing in hot channel. This research presents the effect of inlet velocity and inlet temperature of hydrogen, and the effect of flow configurations of co/counter-flow on thermal design of PCHE heat exchanger based on various CFD simulation analysis.

• 플랜트 저널
• /
• 제15권2호
• /
• pp.46-55
• /
• 2019

기존 메탄 & 질소 팽창 사이클의 효율 개선을 위해 2개의 메탄 팽창 공정 (cold composite curve에 변곡점을 하나 더 추가하기 위해 warm & cold 2개 공정으로 나눔)과 1개의 질소 팽창 공정을 사용한 천연가스 액화 사이클을 소개하기 위한 논문이다. 이전 질소 팽창 사이클 및 메탄 & 질소 사이클과 비교했을 때, 13.92 및 13.13에서 12.08 kW/ton/day로 효율이 8~15% 정도 개선되었다. 순 현재가치(NPV) 기준으로 한 수명 주기 비용 분석(LCC analysis) 또한 약간의 CAPEX 증가는 있지만 프로젝트 순 현재가치가 개선된 결과를 보여준다.

• 시스템엔지니어링학술지
• /
• 제14권2호
• /
• pp.58-66
• /
• 2018

This paper represents a systematic approach aimed at improving the performance of the proportional integral (PI) controller for the Advanced Power Reactor (APR) 1400 Feedwater Control System (FWCS). When the performance of the PI controller offers superior control and enhanced robustness, the steam generator (SG) level is properly controlled. This leads to the safe operation and increased the availability of the nuclear power plant. In this paper, a systems engineering approach is used in order to design a novel PI controller for the FWCS. In the reverse engineering stage, the existing FWCS configuration, especially the characteristics of the feedwater controller as well as the feedwater flow path to each SG from the FWCS, were reviewed and analysed. The overall block diagram of the FWCS and the SG was also developed in the reverse engineering process. In the re-engineering stage, the actual design of the feedwater PI controller was carried out using a genetic algorithm (GA). Lastly, in the validation and verification phase, the existing PI controller and the PI controller designed using GA method were simulated in Simulink/Matlab. From the simulation results, the GA-PI controller was found to exhibit greater stability than the current controller of the FWCS.