• Journal of Engineering Education Research
• /
• v.23 no.3
• /
• pp.49-58
• /
• 2020

In the era of the fourth industrial revolution, the world is undergoing rapid social change. The purpose of this study is to predict the expected changes and necessary competencies and desired curriculum and teaching methods in the field of mechanical engineering in the near future. The research method was a Delphi study. It was conducted three times with 20 mechanical engineering experts. The results of the study are as follows: In the field of mechanical engineering, it will be increased the situational awareness by the use of measurement sensors, development of computer applications, flexibility and optimization by user's needs and mechanical equipment, and demand for robots equipped with AI. The mechanical engineer's career perspectives will be positive, but if it is stable, it will be a crisis. Therefore active response is needed. The competencies required in the field of mechanical engineering include collaborative skills, complex problem solving skills, self-directed learning skills, problem finding skills, creativity, communication skills, convergent thinking skills, and system engineering skills. The undergraduate curriculum to achieve above competencies includes four major dynamics, basic science, programming coding education, convergence education, data processing education, and cyber physical system education. Preferred mechanical engineering teaching methods include project-based learning, hands-on education, problem-based learning, team-based collaborative learning, experiment-based education, and software-assisted education. The mechanical engineering community and the government should be concerned about the education for mechanical engineers with the necessary competencies in the era of the 4th Industrial Revolution, which will make global competitiveness in the mechanical engineering fields.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.138-146
• /
• 2012

This paper is about a the evaluation method for universal design on AHP method. Evaluation of Universal Design to develop indicators of the seven principles of universal design and the tripod of Design(in Japan) Review of the PPP, and previous studies were chosen with reference to a indicators. Selected variables were analyzed using the AHP technique, Universal Design 7 elements were derived weights. Factor of the most important on universal design is 'Perceptible Information'(0.263), and 'Tolerance for Error'(0.207), 'Simple and Intuitive Use'(0.154), 'Low Physical Effort'(0.143) was in order. 'Size & Space for Approach and Use'(0.108) is then shown to be important, while the 'Equitable Use'(0.087), 'Flexibility in Use'(0.038) was rated relatively low importance. Based on the results reflected a weighted evaluation of universal design checklist is proposed. Process to obtain the weights can be applied to a variety of situations.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.1_2
• /
• pp.119-127
• /
• 2006

Real-time animation of human figures in virtual environments is an important problem in the context of computer games and virtual environments. Recently, the use of large collections of captured motion data have added increased realism in character animation. However, assuming that the virtual environment is large and complex, the effort of capturing motion data in a physical environment and adapting them to an extended virtual environment is the bottleneck for achieving interactive character animation and control. We present a new technique for allowing our animated characters to navigate through a large virtual environment, which is constructed using a small set of building blocks. The building blocks can be tiled or aligned with a repeating pattern to create a large environment. We annotate each block with a motion patch, which informs what motions are available for animated characters within the block. We demonstrate the versatility and flexibility of our approach through examples in which multiple characters are animated and controlled at interactive rates in large, complex virtual environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1172-1176
• /
• 2008

In this paper, we describe the implementation and performance of a dual-mode Software Define Radio (SDR) smart antenna base station system. SDR technology enables a communication system to be reconfigured through software downloads to the flexible hardware platform that is implemented using programmable devices such as Digital Signal Processors (DSPs), Field Programmable Gate Arrays (FPGAs), and microprocessors. The presented base station channel card comprises the physical layer (pHY) including the baseband modem as well as the beamforming module. This channel card is designed to support TDD High-Speed Downlink Packet Access (HSDPA) as well as Wireless Broadband Portable Internet (WiBro) utilizing the SDR technology. We first describe the operations and functions required in WiBro and TDD HSDPA. Then, we explain the channel card design procedure and hardware implementation. Finally, we evaluate WiBro and TDD HSDPA performance by simulation and actual channel-card-based processing. Our smart antenna base-station dual-mode channel card shows flexibility and tremendous performance gains in terms of communication capacity and cell coverage.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.3
• /
• pp.200-208
• /
• 1999

In this paper, the corona discharge is analyzed by Finite Element Method(FEM) combined with Flux-corrected Transport(FCT) algorithm. In the previous papers, Finite Difference Method(FDM) combined with FCT was used. Usually in the FDM, the regionof interest is discretized with structured grids. But to refine local regions with same resolution, much more grids are required for the structured grids than for unstructured grids than for unstructured grids. Therefore, we propose the FEM-FCT method to simulate the corona discharge. The proposed method has good flexibility in model shape and can reduce the computational cost by the local refinement where the physical quantities have steep gradients. Using the proposed method, we study the streamer growth of parallel plate electrodes which is initiated by the low and high perturbation density. We find that the varying the initial density of perturbation has very little effect on the streamer propagation. And the corona discharge of the rod-to-plane electrode is simulated. On the surface of the rod electrode, the high concentration of the electric field gives rise to many number of streamer seeds. The strong axial streamer propagate to the plane electrode. The weaker non-axial streamer repel each other and stop growing more. The results are very similar to those of the papers which used the FDM-FCT method on structured grids. Thus we can conclude that the proposed FEM-FCT method is more efficient than the conventional FDM-FCT method by virtue of the reduction in computational grids number.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.144-144
• /
• 2013

Non-thermal atmospheric pressure plasmas have recently garnered much attention due to their unique physical and chemical properties that are sometimes significantly different from those of low pressure plasmas. It can offer many possible application areas including nano and bio/medical areas. Many different types of plasma sources have been developed for specific needs, which can be one of the important merits of the atmospheric pressure plasmas since characteristics of the produced plasma depend significantly on operating parameters such as driving frequency, supply gas type, driving voltage waveform, gas flow rate, gas composition, geometrical factor etc. Among many source configurations, parallel plate type geometry is one of the simplest configurations so that it can offer many insights for understanding basic underlying physics. Traditionally, the parallel plate type set up has been studied actively for understanding low pressure plasma physics along with extensive employment in industries for the same reason. By considering that understanding basic physics, in conjunction with plasma-surface interactions especially for nano & bio materials, should be pursued in parallel with applications, we investigated atmospheric pressure discharge characteristics in a parallel plate type capacitive discharge source with two parallel copper electrodes of 60 mm in diameter and several millimeters in gap distance. In this presentation, some plasma characteristics by varying many operating variables such as inter-electrode distance, gas pressure, gas composition, driving frequency etc will be discussed. The results may be utilized for plasma control for widening application flexibility.

• Journal of the Korean housing association
• /
• v.20 no.6
• /
• pp.89-99
• /
• 2009

The purpose of this research is to determine the deterioration characteristics of high-rise and high-density apartment complexes in 1st period new towns in order to regenerate apartments as sustainable residential environments in Korea. For this purpose, the level of deterioration was evaluated by using 'evaluating indicators of the level of deterioration of high-rise and high-density apartments'. The deterioration characteristics were determined inclusively and concretely based on evaluation results. In addition, the deterioration level according to residents' awareness of the deterioration of their apartment was evaluated. This study was conducted by methods of field data collection, staff interview, field measurement, and resident survey according to the measurement of the evaluating indicators. And the re-organized questionnaire based on the evaluating indicators was utilized for a survey of resident's awareness. The results are as follows: In the physical dimensions of apartments, the deterioration characteristics included deteriorated equipment and a decline in structural performance due to the aging of the apartment, a shortage of parking spaces, and the low flexibility of the bearing wall structure, etc. In terms of the social dimensions, the apartments showed an increase in the number of elderly households, a shortage of community facilities, and a lack of the opportunity for community participation etc. In terms of the economic dimensions, the apartments showed limitations in maintenance & repair and a lack of environmentally friendly features.

• Korean Journal of Environment and Ecology
• /
• v.15 no.4
• /
• pp.408-419
• /
• 2002

The purpose of this study was to establish a conceptual management spectrum framework for integrated management of Baekdudaegan area. The conceptual model was developed through a literature survey that includes the concepts from existing relevant systems and other expert sources In conceptual Baekdudaegan management spectrum framework presented here, three different classes (preservation, buffer, and multiple-use) that specify potential management objectives for area functions were classified in order to pursue management flexibility Three primary management classes should be identified by evaluating Indicators of ecological, physical, and social.cultural environments. An application of the framework requires an explicit selection of indicators and their evaluation. For establishing reliability of the framework, it will be desirable to test it empirically in Baedudaegan areas in the future. In addition, systematic case study for selecting appropriate indicators and identifying evaluation standards must be done.

• Journal of Society of Preventive Korean Medicine
• /
• v.14 no.3
• /
• pp.37-49
• /
• 2010

Objective : Qigong has been reported as an effective for post-mastectomy women. It consists of a series of postures combined with slow, smooth, graceful movements, and is considered a low intensity exercise. In this study, a specialist of Qigong developed a Qigong program for post-mastectomy women in a community. The object of this research is to evaluate the effect of Qigong on a subjective symptom scale, on the grade of discomfort and pain in everyday life, BMI, fat(%), muscular strength, shoulder joint movement, in post-mastectomy women. Methods : The study used a non-equivalent control group non-synchronized design. The experimental group received a Qigong 3 times a week for 12 weeks from September 7th to December 28th in 2009. The subjects were 40 patients are divided into 25 persons in experimental groups and 15 persons in contrastive group. The data were analyzed with descriptive statistics, chi-square test, t-test, Mann-Whitney U test. A P-value less than .05 was considered significant by 2-tailed test. All statistical analyses were performed with SPSS win(ver 12.0). Results : The results were as follows : The score in the subjective symptom(p=.040), and score of anxiety (p=.024), fat(%)(p=.007) were significantly decreased after Qigong program. The values for shoulder flexibility (left : p=.010, right : p=.008), and Muscular strength(grip power)(left : p=.021, right : p=.029) significantly increased after Qigong program. And Flexion(left ; p=.029), Extension(left : p=.001, right : p=.038), Adduction(left ; p=.001, right ; p<0.001) were also significantly increased after Qigong Conclusions : The Qigong is an effective health promotion program for post-mastectomy women.

• The KIPS Transactions:PartA
• /
• v.14A no.4
• /
• pp.227-234
• /
• 2007

In the virtual prototyping environment, we can simulate details of a target model using many components and libraries provided in advance on a computer. The real prototyping environment provides the test simulation environment as a real product, but we can't do a detailed simulation of a real product in the virtual prototyping environment, and we can't do various simulations in the real prototyping environment. So, we made a integrated prototyping environment for linkage of the two types of prototyping environments. Also, in this paper, we developed the integrated prototyping environment based on objects. By this kind of embedded system development environment, we can have the advantages as reuse, flexibility, scalability, and more convenient of product making.