• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.731-736
• /
• 2014

An organic junction transistor with a vertical structure based on an active layer of poly(3-hexylthiophene) was fabricated by facile micro-contact printing combined with the Langmuir-Schaefer technique, without conventional e-beam or photo-lithography. Direct printing and subsequent annealing of Au-nanoparticles provided control over the thickness of the Au electrode and hence control of the electrical contact between the Au electrode and the active layer, ohmic or Schottky. The junction showed similar current-voltage characteristics to an NPN-type transistor. Current through the emitter was simply controllable by the base voltage and a high transconductance of ~0.2 mS was obtained. This novel fabrication method can be applied to amplifying or fast switching organic devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.572-575
• /
• 2008

Photo leakage characteristics of a-Si:H TFT were obtained for the illuminations from various backlight sources and the results were compared and analyzed in terms of the photoelectric properties of light. The analysis shows that the photocurrents are related to the wavelengths of the peak intensities of the spectrums of light sources.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.223-223
• /
• 2004

반도체 및 TFT LCD 제조 공정에서 핵심 공정인 Photo 공정은 PR(Photo Resist, 감광액) Coating -) Exposure(노광) -. Develop(현상)으로 이루어져 있다. 이중 Exposure 공정에 사용되는 장치가 노광장비이다. 노광장비는 Mask Aligner 라고도 불리는데, 그만큼 정렬기술이 노광장비에서는 중요하다. 반도체 및 TFT LCD 는 여러 충의 회로를 쌓아감으로써 층과 층간의 전기적 작용으로 생성되는 Tr.(Transistor) 또는 Diode 등의 수동소자를 집적하는 기술로 제조되는 것으로, 층과 층간의 전기적 작용이 설계한 바와 같이 이루어지기 위해선, 층과 층 사이의 정렬이 정확히 이루어져야 한다.(중략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.258-260
• /
• 2008

Developed halftone exposure technique was successfully applied to the fabrication of narrow transistor channels below $4\;{\mu}m$ with conventional photolithography method. Asymmetric slits concept of photo mask was applied to make channel lengths (L) shorter for thin film transistor's (TFT) high performance. These short channel TFTs verified better quality transistor characteristics.

• 전기의세계
• /
• 제38권4호
• /
• pp.12-19
• /
• 1989

16Mb DRAM을 개발하는데 필요한 주요한 기술적인 문제점으로 설계면에서는 전력소모, Noise, Vcc내부 전압강하회로를 들 수 있다. 기술적인 면은 CELL을 어떻게 형상화느냐에 따라 문제가 다르게 나타나나 단차에 따른 photo/etching, 박막의 leakage전류와 reliability, short channel에 따른 transistor특성의 안정화등이 있다. 특히 16Mb에서는 stack형, stack과 trench의 병합형이 cell의 주요형태가 될 전망이다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권1호
• /
• pp.17-22
• /
• 2001

The floating-gate MOSFETs were fabricated by employing 1.5 m n-well CMOS process and their optical-electrical properties were characterized for the application to CMOS image sensor system. Based on the simulation of energy band diagram and operating mechanism of parasitic BJT were proposed as solutions for the increase of photo-current value. In order to realize them, MOSFETs having multi-gate and channel structures were fabricated and 60% increase in photo-current was achieved through enlargement of depletion layer and parallel connection of parasitic BJTs by channel division.

• 전기전자학회논문지
• /
• 제19권1호
• /
• pp.41-44
• /
• 2015

소자의 집적화에 필수적인 소자 분리공정에서 화학약품의 오염 문제등을 발생시키는 화학적 기계연마기술(CMP) 공정을 사용하지 않고 벌크 finFET(fin field effect transistor) 의 트랜치 구조를 형성할 수 있는 공정에 대하여 제안하였다. 사진 감광막 도포시 발생하는 두께차이와 희생층으로 사용되는 실리콘 질화막을 사용하면 에칭 공정만을 사용하여 상대적으로 표면 위로 돌출된 부분의 실리콘 산화막 층을 에칭하는 것은 물론 finFET 의 채널로 사용되는 실리콘 트랜치 구조를 한번에 형성할 수 있는 특징을 갖는다. 본 연구에서는 AZ1512 사진 감광막을 사용하여 50 나노미터급 실리콘 트랜치 구조를 형성하는 공정을 수행하였으며 그 결과를 소개한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.313-313
• /
• 2013

For high-performance TFT (Thin film transistor), poly-crystalline semiconductor thin film with low resistivity and high hall carrier mobility is necessary. But, conventional SPC (Solid phase crystallization) process has disadvantages in fabrication such as long annealing time in high temperature or using very expensive Excimer laser. On the contrary, MIC (Metal-induced crystallization) process enables semiconductor thin film crystallization at lower temperature in short annealing time. But, it has been known that the poly-crystalline semiconductor thin film fabricated by MIC methods, has low hall mobility due to the residual metals after crystallization process. In this study, Ni metal was shallow implanted using PIII&D (Plasma Immersion Ion Implantation & Deposition) technique instead of depositing Ni layer to reduce the Ni contamination after annealing. In addition, the effect of external magnetic field during annealing was studied to enhance the amorphous silicon thin film crystallization process. Various thin film analytical techniques such as XRD (X-Ray Diffraction), Raman spectroscopy, and XPS (X-ray Photoelectron Spectroscopy), Hall mobility measurement system were used to investigate the structure and composition of silicon thin film samples.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권4호
• /
• pp.161-168
• /
• 2001

Organic thin film transitors(TFTs) are of interest for use in broad area electronic applications. For example, in active matrix liquid crystal displays(AMLCDs), organic TFTs would allow the use of inexpensive, light-weight, flexible, and mechanically rugged plastic substrates as an alternative to the glass substrates needed for commonly used hydrogenated amorphous silicon(a-Si:H). Recently pentacene TFTs with carrier field effect, mobility as large as 2 $cm^2V^{-1}s^{-1}$ have been reported for TFTs fabricated on silicon substrates, and it is higher than that of a-Si:H. But these TFTs are fabricated on silicon wafer and $SiO_2$ was used as a gate insulator. $SiO_2$ deposition process requires a high insulator which is polyimide and photo acryl. We investigated trasfer and output characteristics of the thin film transistors having active layer of pentacene. We calculated field effect mobility and on/off ratio from transfer characteristics of pentacene thin film transistor, and measured IR absorption spectrum of polymide used as the gate dielectric layer. It was found that using the photo acryl as a gate insulator, threshold voltage decreased from -12.5 V to -7 V, field effect mobility increased from 0.012 $cm^2V^{-1}s^{-1}$ to 0.039 $cm^2V^{-1}s^{-1}$ , and on/off current ratio increased from $10^5\;to\;10^6$. It seems that TFTs using photo acryl gate insulator is apt to form channel than TFTs using polyimide gate insulator.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.18-21
• /
• 1995

When we inject drugstuffs to a patient for a long time, it is important to control proper injection amount and flow rate. Since inproper injection amount and a flow rate would cause bad a recovery a patient, the relience of sensors which detect injection amount is an important factor for whole injection systems' performance. In this research, we've compared the suitability of three sensors for injection pump monitoring system. The three types of sensors, piezo film sensor, photo transistor made up with three transmitting photodiodes and receving photodiode, and photo array, were selected for comparing. Using suggested data processing technique and photo amy sensors, we could minimize the effect of interference, disturbance, illumanation change, and sensitivity change caused by sensor's position. According to the experiments, the photo amy showed the higher reliance than any other the three types of sensors. The developed systems could be the foundation of beginning home production of infusion pump system and available for the base model of whole monitoring and control systems.